zephyr

History

Flavio Ceolin da49f2e440 coccicnelle: Ignore return of memset The return of memset is never checked. This patch explicitly ignore the return to avoid MISRA-C violations. The only directory excluded directory was ext/* since it contains only imported code. Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>		2018-09-14 16:55:37 -04:00
..
src	coccicnelle: Ignore return of memset	2018-09-14 16:55:37 -04:00
CMakeLists.txt	cmake: Prepend 'cmake_minimum_required()' into 'app' build scripts	2018-08-15 04:06:50 -07:00
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. _th02-sample:

TH02: Temperature and Humidity Monitor
######################################

Overview
********
This sample periodically reads temperature and humidity from the Grove
Temperature & Humidity Sensor (TH02) and display the results on the Grove LCD
display.


Requirements
************

This sample uses the TH02 sensor and the grove LCD display. Both devices are
controlled using the I2C interface.

More details about the sensor and the display can be found here:

- `Grove Temperature And Humidity`_
- `Grove LCD Module`_

Wiring
******

The easiest way to get this wired is to use the Grove shield and connect both
devices to I2C. No additional wiring is required. Depending on the board you are
using you might need to connect two 10K ohm resistors to SDL and and SDA (I2C).
The LCD display requires 5 volts, so the voltage switch on the shield needs to
be on 5v.


References
**********

 - TH02: http://www.datasheetspdf.com/mobile/748107/TH02.html


.. _Grove LCD Module: http://wiki.seeed.cc/Grove-LCD_RGB_Backlight/
.. _Grove Temperature And Humidity: http://wiki.seeed.cc/Grove-TemptureAndHumidity_Sensor-High-Accuracy_AndMini-v1.0/