zephyr/drivers/sensor/sgp40/sgp40.h

52 lines
1.0 KiB
C

/*
* Copyright (c) 2021 Leonard Pollak
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_DRIVERS_SENSOR_SGP40_SGP40_H_
#define ZEPHYR_DRIVERS_SENSOR_SGP40_SGP40_H_
#include <device.h>
#define SGP40_CMD_MEASURE_RAW 0x260F
#define SGP40_CMD_MEASURE_TEST 0x280E
#define SGP40_CMD_HEATER_OFF 0x3615
#define SGP40_TEST_OK 0xD400
#define SGP40_TEST_FAIL 0x4B00
#define SGP40_RESET_WAIT_MS 10
#define SGP40_MEASURE_WAIT_MS 30
#define SGP40_TEST_WAIT_MS 250
/*
* CRC parameters were taken from the
* "Checksum Calculation" section of the datasheet.
*/
#define SGP40_CRC_POLY 0x31
#define SGP40_CRC_INIT 0xFF
/*
* Value range of compensation data parameters
*/
#define SGP40_COMP_MIN_RH 0
#define SGP40_COMP_MAX_RH 100
#define SGP40_COMP_MIN_T -45
#define SGP40_COMP_MAX_T 130
#define SGP40_COMP_DEFAULT_T 25
#define SGP40_COMP_DEFAULT_RH 50
struct sgp40_config {
struct i2c_dt_spec bus;
bool selftest;
};
struct sgp40_data {
uint16_t raw_sample;
int8_t rh_param[3];
int8_t t_param[3];
};
#endif /* ZEPHYR_DRIVERS_SENSOR_SGP40_SGP40_H_ */