zephyr/boards/arm/olimex_stm32_e407/olimex_stm32_e407.dts

123 lines
2.1 KiB
Plaintext

/*
* Copyright (c) 2017, Erwin Rol <erwin@erwinrol.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <st/f4/stm32f407Xg.dtsi>
#include <st/f4/stm32f407z(e-g)tx-pinctrl.dtsi>
/ {
model = "Olimex STM32-E407 board";
compatible = "olimex,stm32-e407";
chosen {
zephyr,console = &usart1;
zephyr,shell-uart = &usart1;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,ccm = &ccm0;
};
leds {
compatible = "gpio-leds";
green_led_1: led_1 {
gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
label = "LED1";
};
};
gpio_keys {
compatible = "gpio-keys";
user_button: button {
label = "Key";
gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
};
};
aliases {
led0 = &green_led_1;
sw0 = &user_button;
};
};
&clk_hse {
clock-frequency = <DT_FREQ_M(12)>;
status = "okay";
};
&pll {
div-m = <6>;
mul-n = <168>;
div-p = <2>;
div-q = <7>;
clocks = <&clk_hse>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(168)>;
ahb-prescaler = <1>;
apb1-prescaler = <4>;
apb2-prescaler = <2>;
};
&usart1 {
pinctrl-0 = <&usart1_tx_pb6 &usart1_rx_pb7>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&usart3 {
pinctrl-0 = <&usart3_tx_pb10 &usart3_rx_pb11>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&usart6 {
pinctrl-0 = <&usart6_tx_pc6 &usart6_rx_pc7>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&rtc {
status = "okay";
};
&rng {
status = "okay";
};
/* Only one interface should be enabled at a time: usbotg_fs or usbotg_hs */
usb_otg1: &usbotg_fs {
pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>;
pinctrl-names = "default";
status = "disabled";
};
zephyr_udc0: &usbotg_hs {
pinctrl-0 = <&usb_otg_hs_dm_pb14 &usb_otg_hs_dp_pb15>;
pinctrl-names = "default";
status = "okay";
};
&mac {
status = "okay";
pinctrl-0 = <&eth_mdc_pc1
&eth_rxd0_pc4
&eth_rxd1_pc5
&eth_ref_clk_pa1
&eth_mdio_pa2
&eth_col_pa3
&eth_crs_dv_pa7
&eth_tx_en_pg11
&eth_txd0_pg13
&eth_txd1_pg14>;
pinctrl-names = "default";
};