zephyr/boards/arm/nucleo_f303k8/nucleo_f303k8.dts

102 lines
1.7 KiB
Plaintext

/*
* Copyright (c) 2020 Sebastian Schwabe <sebastian.schwabe@mailbox.tu-dresden.de>
* Fabian Paschke <fabian.paschke@eas.iis.fraunhofer.de>
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <st/f3/stm32f303X8.dtsi>
#include <st/f3/stm32f303k(6-8)tx-pinctrl.dtsi>
/ {
model = "STMicroelectronics STM32F303K8-NUCLEO board";
compatible = "st,stm32f303k8-nucleo";
chosen {
zephyr,console = &usart2;
zephyr,shell-uart = &usart2;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
};
leds {
compatible = "gpio-leds";
green_led_3: green_led_3 {
gpios = <&gpiob 3 GPIO_ACTIVE_HIGH>;
label = "LD3";
};
};
pwmleds {
compatible = "pwm-leds";
green_pwm_led: green_pwm_led {
pwms = <&pwm2 2 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
};
};
aliases {
led0 = &green_led_3;
pwm-led0 = &green_pwm_led;
};
};
&clk_hsi {
status = "okay";
};
&pll {
prediv = <1>;
mul = <9>;
clocks = <&clk_hsi>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(72)>;
ahb-prescaler = <1>;
apb1-prescaler = <2>;
apb2-prescaler = <1>;
};
&timers2 {
status = "okay";
pwm2: pwm {
status = "okay";
pinctrl-0 = <&tim2_ch2_pb3>;
pinctrl-names = "default";
};
};
&usart2 {
pinctrl-0 = <&usart2_tx_pa2 &usart2_rx_pa15>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&i2c1 {
pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
pinctrl-0 = <&spi1_nss_pa4 &spi1_sck_pa5
&spi1_miso_pa6 &spi1_mosi_pa7>;
pinctrl-names = "default";
status = "okay";
};
&adc1 {
pinctrl-0 = <&adc1_in1_pa0>;
pinctrl-names = "default";
status = "okay";
};
&rtc {
status = "okay";
};