zephyr/drivers/sensor/ism330dhcx/ism330dhcx.h

136 lines
3.6 KiB
C

/* ST Microelectronics ISM330DHCX 6-axis IMU sensor driver
*
* Copyright (c) 2020 STMicroelectronics
*
* SPDX-License-Identifier: Apache-2.0
*
* Datasheet:
* https://www.st.com/resource/en/datasheet/ism330dhcx.pdf
*/
#ifndef ZEPHYR_DRIVERS_SENSOR_ISM330DHCX_ISM330DHCX_H_
#define ZEPHYR_DRIVERS_SENSOR_ISM330DHCX_ISM330DHCX_H_
#include <zephyr/drivers/sensor.h>
#include <zephyr/types.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/spi.h>
#include <zephyr/drivers/i2c.h>
#include <zephyr/kernel.h>
#include <zephyr/sys/util.h>
#include <stmemsc.h>
#include "ism330dhcx_reg.h"
#define ISM330DHCX_EN_BIT 0x01
#define ISM330DHCX_DIS_BIT 0x00
/* Accel sensor sensitivity grain is 61 ug/LSB */
#define GAIN_UNIT_XL (61LL)
/* Gyro sensor sensitivity grain is 4.375 udps/LSB */
#define GAIN_UNIT_G (4375LL)
#define SENSOR_PI_DOUBLE (SENSOR_PI / 1000000.0)
#define SENSOR_DEG2RAD_DOUBLE (SENSOR_PI_DOUBLE / 180)
#define SENSOR_G_DOUBLE (SENSOR_G / 1000000.0)
struct ism330dhcx_config {
int (*bus_init)(const struct device *dev);
uint8_t accel_odr;
uint16_t gyro_odr;
uint8_t accel_range;
uint16_t gyro_range;
#ifdef CONFIG_ISM330DHCX_TRIGGER
uint8_t int_pin;
struct gpio_dt_spec drdy_gpio;
#endif /* CONFIG_ISM330DHCX_TRIGGER */
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c)
struct i2c_dt_spec i2c;
#elif DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
struct spi_dt_spec spi;
#endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c) */
};
union samples {
uint8_t raw[6];
struct {
int16_t axis[3];
};
} __aligned(2);
#define ISM330DHCX_SHUB_MAX_NUM_SLVS 2
struct ism330dhcx_data {
const struct device *dev;
int16_t acc[3];
uint32_t acc_gain;
int16_t gyro[3];
uint32_t gyro_gain;
#if defined(CONFIG_ISM330DHCX_ENABLE_TEMP)
int temp_sample;
#endif
#if defined(CONFIG_ISM330DHCX_SENSORHUB)
uint8_t ext_data[2][6];
uint16_t magn_gain;
struct hts221_data {
int16_t x0;
int16_t x1;
int16_t y0;
int16_t y1;
} hts221;
#endif /* CONFIG_ISM330DHCX_SENSORHUB */
stmdev_ctx_t *ctx;
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c)
stmdev_ctx_t ctx_i2c;
#elif DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
stmdev_ctx_t ctx_spi;
#endif
uint16_t accel_freq;
uint8_t accel_fs;
uint16_t gyro_freq;
uint8_t gyro_fs;
#ifdef CONFIG_ISM330DHCX_TRIGGER
struct gpio_callback gpio_cb;
sensor_trigger_handler_t handler_drdy_acc;
const struct sensor_trigger *trig_drdy_acc;
sensor_trigger_handler_t handler_drdy_gyr;
const struct sensor_trigger *trig_drdy_gyr;
sensor_trigger_handler_t handler_drdy_temp;
const struct sensor_trigger *trig_drdy_temp;
#if defined(CONFIG_ISM330DHCX_TRIGGER_OWN_THREAD)
K_KERNEL_STACK_MEMBER(thread_stack, CONFIG_ISM330DHCX_THREAD_STACK_SIZE);
struct k_thread thread;
struct k_sem gpio_sem;
#elif defined(CONFIG_ISM330DHCX_TRIGGER_GLOBAL_THREAD)
struct k_work work;
#endif
#endif /* CONFIG_ISM330DHCX_TRIGGER */
};
int ism330dhcx_spi_init(const struct device *dev);
int ism330dhcx_i2c_init(const struct device *dev);
#if defined(CONFIG_ISM330DHCX_SENSORHUB)
int ism330dhcx_shub_init(const struct device *dev);
int ism330dhcx_shub_fetch_external_devs(const struct device *dev);
int ism330dhcx_shub_get_idx(enum sensor_channel type);
int ism330dhcx_shub_config(const struct device *dev, enum sensor_channel chan,
enum sensor_attribute attr,
const struct sensor_value *val);
#endif /* CONFIG_ISM330DHCX_SENSORHUB */
#ifdef CONFIG_ISM330DHCX_TRIGGER
int ism330dhcx_trigger_set(const struct device *dev,
const struct sensor_trigger *trig,
sensor_trigger_handler_t handler);
int ism330dhcx_init_interrupt(const struct device *dev);
#endif
#endif /* ZEPHYR_DRIVERS_SENSOR_ISM330DHCX_ISM330DHCX_H_ */