Anas Nashif ecf96d2cfa arduino 101: make factory bootloader config the default ... The Arduino 101 comes with a bootloader that supports DFU and flashing of all cores using the dfu-util package. This changes the memory layout of the image built for the Arduino 101 and remove previous work-arounds to allow booting, including the version-header section in the linker script. The bootloader expects the text section at +0x30 from the physical load address and thus requires special treatment in the linker script. Other changes by Andrew Boie: The flash size parameters were both wrong. X86 side has 192K of flash from 0x4003000 - 0x40060000, the entire span of sys_flash1. ARC side is now the span from 0x40010000 - 0x40030000, 128K. Change-Id: Iecfa5d2b84a3f522d9eca06268d6b8b71a094aaa Signed-off-by: Anas Nashif <anas.nashif@intel.com>		2016-09-17 11:13:59 +00:00
..
support	Update Arduino 101 openocd.cfg	2016-02-05 20:25:30 -05:00
Kconfig.board	boards: rename Quark SE Devboard to Quark SE C1000 (Sensor Subsystem)	2016-09-16 03:10:30 +00:00
Kconfig.defconfig	arduino 101: make factory bootloader config the default	2016-09-17 11:13:59 +00:00
Makefile	arduino 101: make factory bootloader config the default	2016-09-17 11:13:59 +00:00
Makefile.board	arc: make SRAM/DCCM values configurable	2016-04-25 19:17:03 +00:00
arduino_101_sss_defconfig	arduino 101: make factory bootloader config the default	2016-09-17 11:13:59 +00:00
board.h	Use SoC instead of platform.	2016-02-05 20:25:11 -05:00