362 lines
8.5 KiB
C
362 lines
8.5 KiB
C
/*
|
|
* Copyright (c) 2015 Intel Corporation
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
#include <nanokernel.h>
|
|
#include <arch/cpu.h>
|
|
|
|
#include <device.h>
|
|
#include <sys_clock.h>
|
|
#include <stdbool.h>
|
|
|
|
#include <init.h>
|
|
#include <i2c.h>
|
|
#include <display/grove_lcd.h>
|
|
|
|
#define SLEEP_IN_US(_x_) ((_x_) * 1000)
|
|
|
|
#define GROVE_LCD_DISPLAY_ADDR (0x3E)
|
|
#define GROVE_RGB_BACKLIGHT_ADDR (0x62)
|
|
|
|
#ifndef CONFIG_GROVE_DEBUG
|
|
#define DBG(...) { ; }
|
|
#else
|
|
#if defined(CONFIG_STDOUT_CONSOLE)
|
|
#include <stdio.h>
|
|
#define DBG printf
|
|
#else
|
|
#include <misc/printk.h>
|
|
#define DBG printk
|
|
#endif /* CONFIG_STDOUT_CONSOLE */
|
|
#endif /* CONFIG_GROVE_DEBUG */
|
|
|
|
struct command {
|
|
uint8_t control;
|
|
uint8_t data;
|
|
};
|
|
|
|
struct glcd_data {
|
|
struct device *i2c;
|
|
uint8_t input_set;
|
|
uint8_t display_switch;
|
|
uint8_t function;
|
|
};
|
|
|
|
struct glcd_driver {
|
|
uint16_t lcd_addr;
|
|
uint16_t rgb_addr;
|
|
};
|
|
|
|
|
|
#define ON 0x1
|
|
#define OFF 0x0
|
|
|
|
/********************************************
|
|
* LCD FUNCTIONS
|
|
*******************************************/
|
|
|
|
/* GLCD_CMD_SCREEN_CLEAR has no options */
|
|
/* GLCD_CMD_CURSOR_RETURN has no options */
|
|
|
|
/* Defines for the GLCD_CMD_CURSOR_SHIFT */
|
|
#define GLCD_CS_DISPLAY_SHIFT (1 << 3)
|
|
#define GLCD_CS_RIGHT_SHIFT (1 << 2)
|
|
|
|
/* LCD Display Commands */
|
|
#define GLCD_CMD_SCREEN_CLEAR (1 << 0)
|
|
#define GLCD_CMD_CURSOR_RETURN (1 << 1)
|
|
#define GLCD_CMD_INPUT_SET (1 << 2)
|
|
#define GLCD_CMD_DISPLAY_SWITCH (1 << 3)
|
|
#define GLCD_CMD_CURSOR_SHIFT (1 << 4)
|
|
#define GLCD_CMD_FUNCTION_SET (1 << 5)
|
|
#define GLCD_CMD_SET_CGRAM_ADDR (1 << 6)
|
|
#define GLCD_CMD_SET_DDRAM_ADDR (1 << 7)
|
|
|
|
|
|
/********************************************
|
|
* RGB FUNCTIONS
|
|
*******************************************/
|
|
|
|
#define REGISTER_POWER 0x08
|
|
#define REGISTER_R 0x04
|
|
#define REGISTER_G 0x03
|
|
#define REGISTER_B 0x02
|
|
|
|
static uint8_t color_define[][3] = {
|
|
{ 255, 255, 255 }, /* white */
|
|
{ 255, 0, 0 }, /* red */
|
|
{ 0, 255, 0 }, /* green */
|
|
{ 0, 0, 255 }, /* blue */
|
|
};
|
|
|
|
|
|
/********************************************
|
|
* PRIVATE FUNCTIONS
|
|
*******************************************/
|
|
static void _rgb_reg_set(struct device * const i2c, uint8_t addr, uint8_t dta)
|
|
{
|
|
uint8_t data[2] = { addr, dta };
|
|
|
|
i2c_polling_write(i2c, data, sizeof(data), GROVE_RGB_BACKLIGHT_ADDR);
|
|
}
|
|
|
|
|
|
static inline void _sleep(uint32_t sleep_in_ms)
|
|
{
|
|
sys_thread_busy_wait(SLEEP_IN_US(sleep_in_ms));
|
|
}
|
|
|
|
|
|
/********************************************
|
|
* PUBLIC FUNCTIONS
|
|
*******************************************/
|
|
void glcd_print(struct device *port, unsigned char *data, uint32_t size)
|
|
{
|
|
struct glcd_driver * const rom = (struct glcd_driver *)
|
|
port->config->config_info;
|
|
struct glcd_data *dev = port->driver_data;
|
|
uint8_t buf[] = { GLCD_CMD_SET_CGRAM_ADDR, 0 };
|
|
int i;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
buf[1] = data[i];
|
|
i2c_polling_write(dev->i2c, buf, sizeof(buf), rom->lcd_addr);
|
|
}
|
|
}
|
|
|
|
|
|
void glcd_cursor_pos_set(struct device *port, uint8_t col, uint8_t row)
|
|
{
|
|
struct glcd_driver * const rom = (struct glcd_driver *)
|
|
port->config->config_info;
|
|
struct glcd_data *dev = port->driver_data;
|
|
|
|
unsigned char data[2];
|
|
|
|
if (row == 0) {
|
|
col |= 0x80;
|
|
} else {
|
|
col |= 0xC0;
|
|
}
|
|
|
|
data[0] = GLCD_CMD_SET_DDRAM_ADDR;
|
|
data[1] = col;
|
|
|
|
i2c_polling_write(dev->i2c, data, 2, rom->lcd_addr);
|
|
}
|
|
|
|
|
|
void glcd_clear(struct device *port)
|
|
{
|
|
struct glcd_driver * const rom = (struct glcd_driver *)
|
|
port->config->config_info;
|
|
struct glcd_data *dev = port->driver_data;
|
|
uint8_t clear[] = { 0, GLCD_CMD_SCREEN_CLEAR };
|
|
|
|
i2c_polling_write(dev->i2c, clear, sizeof(clear), rom->lcd_addr);
|
|
DBG("Grove LCD: clear, delay 20 ms\n");
|
|
_sleep(20);
|
|
}
|
|
|
|
|
|
void glcd_display_state_set(struct device *port, uint8_t opt)
|
|
{
|
|
struct glcd_driver * const rom = (struct glcd_driver *)
|
|
port->config->config_info;
|
|
struct glcd_data *dev = port->driver_data;
|
|
uint8_t data[] = { 0, 0 };
|
|
|
|
dev->display_switch = opt;
|
|
data[1] = (opt | GLCD_CMD_DISPLAY_SWITCH);
|
|
|
|
i2c_polling_write(dev->i2c, data, sizeof(data), rom->lcd_addr);
|
|
|
|
DBG("Grove LCD: set display_state options, delay 5 ms\n");
|
|
_sleep(5);
|
|
}
|
|
|
|
|
|
uint8_t glcd_display_state_get(struct device *port)
|
|
{
|
|
struct glcd_data *dev = port->driver_data;
|
|
|
|
return dev->display_switch;
|
|
}
|
|
|
|
|
|
void glcd_input_state_set(struct device *port, uint8_t opt)
|
|
{
|
|
struct glcd_driver * const rom = port->config->config_info;
|
|
struct glcd_data *dev = port->driver_data;
|
|
uint8_t data[] = { 0, 0 };
|
|
|
|
dev->input_set = opt;
|
|
data[1] = (opt | GLCD_CMD_INPUT_SET);
|
|
|
|
i2c_polling_write(dev->i2c, &dev->input_set, sizeof(dev->input_set),
|
|
rom->lcd_addr);
|
|
DBG("Grove LCD: set the input_set, no delay\n");
|
|
}
|
|
|
|
|
|
uint8_t glcd_input_state_get(struct device *port)
|
|
{
|
|
struct glcd_data *dev = port->driver_data;
|
|
|
|
return dev->input_set;
|
|
}
|
|
|
|
|
|
void glcd_color_select(struct device *port, uint8_t color)
|
|
{
|
|
#if CONFIG_GROVE_DEBUG
|
|
if (color > 3) {
|
|
DBG("%s : selected color is too high a value\n", __func__);
|
|
return;
|
|
}
|
|
#endif
|
|
glcd_color_set(port, color_define[color][0],
|
|
color_define[color][1],
|
|
color_define[color][2]);
|
|
}
|
|
|
|
|
|
void glcd_color_set(struct device *port, uint8_t r, uint8_t g, uint8_t b)
|
|
{
|
|
struct glcd_data * const dev = port->driver_data;
|
|
|
|
_rgb_reg_set(dev->i2c, REGISTER_R, r);
|
|
_rgb_reg_set(dev->i2c, REGISTER_G, g);
|
|
_rgb_reg_set(dev->i2c, REGISTER_B, b);
|
|
}
|
|
|
|
|
|
void glcd_function_set(struct device *port, uint8_t opt)
|
|
{
|
|
struct glcd_driver * const rom = port->config->config_info;
|
|
struct glcd_data *dev = port->driver_data;
|
|
uint8_t data[] = { 0, 0 };
|
|
|
|
dev->function = opt;
|
|
data[1] = (opt | GLCD_CMD_FUNCTION_SET);
|
|
|
|
i2c_polling_write(dev->i2c, data, sizeof(data), rom->lcd_addr);
|
|
|
|
DBG("Grove LCD: set function options, delay 5 ms\n");
|
|
_sleep(5);
|
|
}
|
|
|
|
|
|
uint8_t glcd_function_get(struct device *port)
|
|
{
|
|
struct glcd_data *dev = port->driver_data;
|
|
|
|
return dev->function;
|
|
}
|
|
|
|
|
|
int glcd_initialize(struct device *port)
|
|
{
|
|
struct glcd_data *dev = port->driver_data;
|
|
uint8_t cmd;
|
|
|
|
DBG("Grove LCD: initialize called\n");
|
|
|
|
dev->input_set = 0;
|
|
dev->display_switch = 0;
|
|
dev->function = 0;
|
|
|
|
/*
|
|
* First set up the device driver...
|
|
* we need a pointer to the I2C device we are bound to
|
|
*/
|
|
dev->i2c = device_get_binding(CONFIG_I2C_DW_0_NAME);
|
|
|
|
if (!dev->i2c) {
|
|
return DEV_NOT_CONFIG;
|
|
}
|
|
|
|
/*
|
|
* Initialization sequence from the data sheet:
|
|
* 1 - Power on
|
|
* - Wait for more than 30 ms AFTER VDD rises to 4.5v
|
|
* 2 - Send FUNCTION set
|
|
* - Wait for 39 us
|
|
* 3 - Send DISPLAY Control
|
|
* - wait for 39 us
|
|
* 4 - send DISPLAY Clear
|
|
* - wait for 1.5 ms
|
|
* 5 - send ENTRY Mode
|
|
* 6 - Initialization is done
|
|
*/
|
|
|
|
|
|
/*
|
|
* We're here! Let's just make sure we've had enough time for the
|
|
* VDD to power on, so pause a little here, 30 ms min, so we go 50
|
|
*/
|
|
DBG("Grove LCD: delay 50 ms while the VDD powers on\n");
|
|
_sleep(50);
|
|
|
|
/* Configure everything for the display function first */
|
|
cmd = GLCD_CMD_FUNCTION_SET | GLCD_FS_ROWS_2;
|
|
glcd_function_set(port, cmd);
|
|
|
|
/* turn the display on - by default no cursor and no blinking */
|
|
cmd = GLCD_DS_DISPLAY_ON | GLCD_DS_CURSOR_OFF | GLCD_DS_BLINK_OFF;
|
|
|
|
glcd_display_state_set(port, cmd);
|
|
|
|
/* Clear the screen */
|
|
glcd_clear(port);
|
|
|
|
/* Initialize to the default text direction for romance languages */
|
|
cmd = GLCD_IS_ENTRY_LEFT | GLCD_IS_SHIFT_DECREMENT;
|
|
|
|
glcd_input_state_set(port, cmd);
|
|
|
|
/* Now power on the background RGB control */
|
|
DBG("Grove LCD: configuring the RGB background\n");
|
|
_rgb_reg_set(dev->i2c, 0x00, 0x00);
|
|
_rgb_reg_set(dev->i2c, 0x01, 0x05);
|
|
_rgb_reg_set(dev->i2c, 0x08, 0xAA);
|
|
|
|
/* Now set the background color to white */
|
|
DBG("Grove LCD: background set to white\n");
|
|
_rgb_reg_set(dev->i2c, REGISTER_R, color_define[GROVE_RGB_WHITE][0]);
|
|
_rgb_reg_set(dev->i2c, REGISTER_G, color_define[GROVE_RGB_WHITE][1]);
|
|
_rgb_reg_set(dev->i2c, REGISTER_B, color_define[GROVE_RGB_WHITE][2]);
|
|
|
|
return DEV_OK;
|
|
}
|
|
|
|
struct glcd_driver grove_lcd_config = {
|
|
.lcd_addr = GROVE_LCD_DISPLAY_ADDR,
|
|
.rgb_addr = GROVE_RGB_BACKLIGHT_ADDR,
|
|
};
|
|
|
|
struct glcd_data grove_lcd_driver = {
|
|
.i2c = NULL,
|
|
.input_set = 0,
|
|
.display_switch = 0,
|
|
.function = 0,
|
|
};
|
|
|
|
DECLARE_DEVICE_INIT_CONFIG(grove_lcd,
|
|
GROVE_LCD_NAME,
|
|
glcd_initialize,
|
|
&grove_lcd_config);
|
|
|
|
app_early_init(grove_lcd, &grove_lcd_driver);
|