1225 lines
34 KiB
C
1225 lines
34 KiB
C
/*
|
|
* Copyright (c) 2021 IoT.bzh
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT renesas_rcar_can
|
|
|
|
#include <zephyr/kernel.h>
|
|
#include <errno.h>
|
|
#include <zephyr/drivers/can.h>
|
|
#include <zephyr/drivers/can/transceiver.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#include <zephyr/drivers/clock_control/renesas_cpg_mssr.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
#include <zephyr/logging/log.h>
|
|
#include <zephyr/irq.h>
|
|
|
|
LOG_MODULE_REGISTER(can_rcar, CONFIG_CAN_LOG_LEVEL);
|
|
|
|
#include "can_utils.h"
|
|
|
|
/* Control Register */
|
|
#define RCAR_CAN_CTLR 0x0840
|
|
/* Control Register bits */
|
|
#define RCAR_CAN_CTLR_BOM (3 << 11) /* Bus-Off Recovery Mode Bits */
|
|
#define RCAR_CAN_CTLR_BOM_ENT BIT(11) /* Automatic halt mode entry at bus-off entry */
|
|
#define RCAR_CAN_CTLR_SLPM BIT(10)
|
|
#define RCAR_CAN_CTLR_CANM_HALT BIT(9)
|
|
#define RCAR_CAN_CTLR_CANM_RESET BIT(8)
|
|
#define RCAR_CAN_CTLR_CANM_MASK (3 << 8)
|
|
#define RCAR_CAN_CTLR_MLM BIT(3) /* Message Lost Mode Select */
|
|
#define RCAR_CAN_CTLR_IDFM (3 << 1) /* ID Format Mode Select Bits */
|
|
#define RCAR_CAN_CTLR_IDFM_MIXED BIT(2) /* Mixed ID mode */
|
|
#define RCAR_CAN_CTLR_MBM BIT(0) /* Mailbox Mode select */
|
|
|
|
/* Mask Register */
|
|
#define RCAR_CAN_MKR0 0x0430
|
|
#define RCAR_CAN_MKR1 0x0434
|
|
#define RCAR_CAN_MKR2 0x0400
|
|
#define RCAR_CAN_MKR3 0x0404
|
|
#define RCAR_CAN_MKR4 0x0408
|
|
#define RCAR_CAN_MKR5 0x040C
|
|
#define RCAR_CAN_MKR6 0x0410
|
|
#define RCAR_CAN_MKR7 0x0414
|
|
#define RCAR_CAN_MKR8 0x0418
|
|
#define RCAR_CAN_MKR9 0x041C
|
|
|
|
/* FIFO Received ID Compare Register 0 */
|
|
#define RCAR_CAN_FIDCR0 0x0420
|
|
|
|
/* FIFO Received ID Compare Register 1 */
|
|
#define RCAR_CAN_FIDCR1 0x0424
|
|
|
|
/* FIFO Received ID Compare Registers 0 and 1 bits */
|
|
#define RCAR_CAN_FIDCR_IDE BIT(31) /* ID Extension Bit */
|
|
#define RCAR_CAN_FIDCR_RTR BIT(30) /* RTR Bit */
|
|
|
|
/* Mask Invalid Register 0 */
|
|
#define RCAR_CAN_MKIVLR0 0x0438
|
|
/* Mask Invalid Register 1 */
|
|
#define RCAR_CAN_MKIVLR1 0x0428
|
|
/* Mailbox Interrupt Enable Registers*/
|
|
#define RCAR_CAN_MIER0 0x043C
|
|
#define RCAR_CAN_MIER1 0x042C
|
|
#define RCAR_CAN_MIER1_RXFIE BIT(28) /* Rx FIFO Interrupt Enable */
|
|
#define RCAR_CAN_MIER1_TXFIE BIT(24) /* Tx FIFO Interrupt Enable */
|
|
|
|
#define RCAR_CAN_STR 0x0842 /* Status Register */
|
|
#define RCAR_CAN_STR_RSTST BIT(8) /* Reset Status Bit */
|
|
#define RCAR_CAN_STR_HLTST BIT(9) /* Halt Status Bit */
|
|
#define RCAR_CAN_STR_SLPST BIT(10) /* Sleep Status Bit */
|
|
#define MAX_STR_READS 0x100
|
|
|
|
/* Bit Configuration Register */
|
|
#define RCAR_CAN_BCR 0x0844
|
|
|
|
/* Clock Select Register */
|
|
#define RCAR_CAN_CLKR 0x0847
|
|
#define RCAR_CAN_CLKR_EXT_CLOCK 0x3 /* External input clock */
|
|
#define RCAR_CAN_CLKR_CLKP2 0x1
|
|
#define RCAR_CAN_CLKR_CLKP1 0x0
|
|
|
|
/* Error Interrupt Enable Register */
|
|
#define RCAR_CAN_EIER 0x084C
|
|
|
|
/* Interrupt Enable Register */
|
|
#define RCAR_CAN_IER 0x0860
|
|
#define RCAR_CAN_IER_ERSIE BIT(5) /* Error Interrupt Enable Bit */
|
|
#define RCAR_CAN_IER_RXFIE BIT(4) /* Rx FIFO Interrupt Enable Bit */
|
|
#define RCAR_CAN_IER_TXFIE BIT(3) /* Tx FIFO Interrupt Enable Bit */
|
|
|
|
/* Interrupt Status Register */
|
|
#define RCAR_CAN_ISR 0x0861
|
|
#define RCAR_CAN_ISR_ERSF BIT(5) /* Error (ERS) Interrupt */
|
|
#define RCAR_CAN_ISR_RXFF BIT(4) /* Reception FIFO Interrupt */
|
|
#define RCAR_CAN_ISR_TXFF BIT(3) /* Transmission FIFO Interrupt */
|
|
|
|
/* Receive FIFO Control Register */
|
|
#define RCAR_CAN_RFCR 0x0848
|
|
#define RCAR_CAN_RFCR_RFE BIT(0) /* Receive FIFO Enable */
|
|
#define RCAR_CAN_RFCR_RFEST BIT(7) /* Receive FIFO Empty Flag */
|
|
|
|
/* Receive FIFO Pointer Control Register */
|
|
#define RCAR_CAN_RFPCR 0x0849
|
|
|
|
/* Transmit FIFO Control Register */
|
|
#define RCAR_CAN_TFCR 0x084A
|
|
#define RCAR_CAN_TFCR_TFE BIT(0) /* Transmit FIFO Enable */
|
|
#define RCAR_CAN_TFCR_TFUST (7 << 1) /* Transmit FIFO Unsent Msg Number Status Bits */
|
|
#define RCAR_CAN_TFCR_TFUST_SHIFT 1 /* Offset of Tx FIFO Unsent */
|
|
|
|
/* Transmit FIFO Pointer Control Register */
|
|
#define RCAR_CAN_TFPCR 0x084B
|
|
|
|
/* Error Code Store Register*/
|
|
#define RCAR_CAN_ECSR 0x0850 /* Error Code Store Register */
|
|
#define RCAR_CAN_ECSR_EDPM BIT(7) /* Error Display Mode Select */
|
|
#define RCAR_CAN_ECSR_ADEF BIT(6) /* ACK Delimiter Error Flag */
|
|
#define RCAR_CAN_ECSR_BE0F BIT(5) /* Bit Error (dominant) Flag */
|
|
#define RCAR_CAN_ECSR_BE1F BIT(4) /* Bit Error (recessive) Flag */
|
|
#define RCAR_CAN_ECSR_CEF BIT(3) /* CRC Error Flag */
|
|
#define RCAR_CAN_ECSR_AEF BIT(2) /* ACK Error Flag */
|
|
#define RCAR_CAN_ECSR_FEF BIT(1) /* Form Error Flag */
|
|
#define RCAR_CAN_ECSR_SEF BIT(0) /* Stuff Error Flag */
|
|
|
|
/* Test Control Register */
|
|
#define RCAR_CAN_TCR 0x0858
|
|
#define RCAR_CAN_TCR_TSTE BIT(0) /* Test Mode Enable Bit*/
|
|
#define RCAR_CAN_TCR_LISTEN_ONLY BIT(1)
|
|
#define RCAR_CAN_TCR_INT_LOOP (3 << 1) /* Internal loopback*/
|
|
|
|
/* Error Interrupt Factor Judge Register bits */
|
|
#define RCAR_CAN_EIFR 0x084D
|
|
#define RCAR_CAN_EIFR_BLIF BIT(7) /* Bus Lock Detect Flag */
|
|
#define RCAR_CAN_EIFR_OLIF BIT(6) /* Overload Frame Transmission */
|
|
#define RCAR_CAN_EIFR_ORIF BIT(5) /* Receive Overrun Detect Flag */
|
|
#define RCAR_CAN_EIFR_BORIF BIT(4) /* Bus-Off Recovery Detect Flag */
|
|
#define RCAR_CAN_EIFR_BOEIF BIT(3) /* Bus-Off Entry Detect Flag */
|
|
#define RCAR_CAN_EIFR_EPIF BIT(2) /* Error Passive Detect Flag */
|
|
#define RCAR_CAN_EIFR_EWIF BIT(1) /* Error Warning Detect Flag */
|
|
#define RCAR_CAN_EIFR_BEIF BIT(0) /* Bus Error Detect Flag */
|
|
|
|
/* Receive Error Count Register */
|
|
#define RCAR_CAN_RECR 0x084D
|
|
/* Transmit Error Count Register */
|
|
#define RCAR_CAN_TECR 0x084F
|
|
|
|
/* Mailbox configuration:
|
|
* mailbox 60 - 63 - Rx FIFO mailboxes
|
|
* mailbox 56 - 59 - Tx FIFO mailboxes
|
|
* non-FIFO mailboxes are not used
|
|
*/
|
|
#define RCAR_CAN_MB_56 0x0380
|
|
#define RCAR_CAN_MB_60 0x03C0
|
|
/* DLC must be accessed as a 16 bit register */
|
|
#define RCAR_CAN_MB_DLC_OFFSET 0x4 /* Data length code */
|
|
#define RCAR_CAN_MB_DATA_OFFSET 0x6 /* Data section */
|
|
#define RCAR_CAN_MB_TSH_OFFSET 0x14 /* Timestamp upper byte */
|
|
#define RCAR_CAN_MB_TSL_OFFSET 0x15 /* Timestamp lower byte */
|
|
#define RCAR_CAN_FIFO_DEPTH 4
|
|
#define RCAR_CAN_MB_SID_SHIFT 18
|
|
#define RCAR_CAN_MB_RTR BIT(30)
|
|
#define RCAR_CAN_MB_IDE BIT(31)
|
|
#define RCAR_CAN_MB_SID_MASK 0x1FFC0000
|
|
#define RCAR_CAN_MB_EID_MASK 0x1FFFFFFF
|
|
|
|
typedef void (*init_func_t)(const struct device *dev);
|
|
|
|
struct can_rcar_cfg {
|
|
uint32_t reg_addr;
|
|
int reg_size;
|
|
init_func_t init_func;
|
|
const struct device *clock_dev;
|
|
struct rcar_cpg_clk mod_clk;
|
|
struct rcar_cpg_clk bus_clk;
|
|
uint32_t bus_speed;
|
|
uint8_t sjw;
|
|
uint8_t prop_seg;
|
|
uint8_t phase_seg1;
|
|
uint8_t phase_seg2;
|
|
uint16_t sample_point;
|
|
const struct pinctrl_dev_config *pcfg;
|
|
const struct device *phy;
|
|
uint32_t max_bitrate;
|
|
};
|
|
|
|
struct can_rcar_tx_cb {
|
|
can_tx_callback_t cb;
|
|
void *cb_arg;
|
|
};
|
|
|
|
struct can_rcar_data {
|
|
struct k_mutex inst_mutex;
|
|
struct k_sem tx_sem;
|
|
struct can_rcar_tx_cb tx_cb[RCAR_CAN_FIFO_DEPTH];
|
|
uint8_t tx_head;
|
|
uint8_t tx_tail;
|
|
uint8_t tx_unsent;
|
|
struct k_mutex rx_mutex;
|
|
can_rx_callback_t rx_callback[CONFIG_CAN_RCAR_MAX_FILTER];
|
|
void *rx_callback_arg[CONFIG_CAN_RCAR_MAX_FILTER];
|
|
struct can_filter filter[CONFIG_CAN_RCAR_MAX_FILTER];
|
|
can_state_change_callback_t state_change_cb;
|
|
void *state_change_cb_data;
|
|
enum can_state state;
|
|
bool started;
|
|
};
|
|
|
|
static inline uint16_t can_rcar_read16(const struct can_rcar_cfg *config,
|
|
uint32_t offs)
|
|
{
|
|
return sys_read16(config->reg_addr + offs);
|
|
}
|
|
|
|
static inline void can_rcar_write16(const struct can_rcar_cfg *config,
|
|
uint32_t offs, uint16_t value)
|
|
{
|
|
sys_write16(value, config->reg_addr + offs);
|
|
}
|
|
|
|
static void can_rcar_tx_done(const struct device *dev)
|
|
{
|
|
struct can_rcar_data *data = dev->data;
|
|
struct can_rcar_tx_cb *tx_cb;
|
|
|
|
tx_cb = &data->tx_cb[data->tx_tail];
|
|
data->tx_tail++;
|
|
if (data->tx_tail >= RCAR_CAN_FIFO_DEPTH) {
|
|
data->tx_tail = 0;
|
|
}
|
|
|
|
data->tx_unsent--;
|
|
tx_cb->cb(dev, 0, tx_cb->cb_arg);
|
|
k_sem_give(&data->tx_sem);
|
|
}
|
|
|
|
static void can_rcar_get_error_count(const struct can_rcar_cfg *config,
|
|
struct can_bus_err_cnt *err_cnt)
|
|
{
|
|
err_cnt->tx_err_cnt = sys_read8(config->reg_addr + RCAR_CAN_TECR);
|
|
err_cnt->rx_err_cnt = sys_read8(config->reg_addr + RCAR_CAN_RECR);
|
|
}
|
|
|
|
static void can_rcar_state_change(const struct device *dev, uint32_t newstate)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
const can_state_change_callback_t cb = data->state_change_cb;
|
|
void *state_change_cb_data = data->state_change_cb_data;
|
|
struct can_bus_err_cnt err_cnt;
|
|
|
|
if (data->state == newstate) {
|
|
return;
|
|
}
|
|
|
|
LOG_DBG("Can state change new: %u old:%u\n", newstate, data->state);
|
|
|
|
data->state = newstate;
|
|
|
|
if (cb == NULL) {
|
|
return;
|
|
}
|
|
can_rcar_get_error_count(config, &err_cnt);
|
|
cb(dev, newstate, err_cnt, state_change_cb_data);
|
|
}
|
|
|
|
static void can_rcar_error(const struct device *dev)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
uint8_t eifr, ecsr;
|
|
|
|
eifr = sys_read8(config->reg_addr + RCAR_CAN_EIFR);
|
|
|
|
if (eifr & RCAR_CAN_EIFR_BEIF) {
|
|
|
|
ecsr = sys_read8(config->reg_addr + RCAR_CAN_ECSR);
|
|
if (ecsr & RCAR_CAN_ECSR_ADEF) {
|
|
CAN_STATS_ACK_ERROR_INC(dev);
|
|
sys_write8((uint8_t)~RCAR_CAN_ECSR_ADEF,
|
|
config->reg_addr + RCAR_CAN_ECSR);
|
|
}
|
|
if (ecsr & RCAR_CAN_ECSR_BE0F) {
|
|
CAN_STATS_BIT0_ERROR_INC(dev);
|
|
sys_write8((uint8_t)~RCAR_CAN_ECSR_BE0F,
|
|
config->reg_addr + RCAR_CAN_ECSR);
|
|
}
|
|
if (ecsr & RCAR_CAN_ECSR_BE1F) {
|
|
CAN_STATS_BIT1_ERROR_INC(dev);
|
|
sys_write8((uint8_t)~RCAR_CAN_ECSR_BE1F,
|
|
config->reg_addr + RCAR_CAN_ECSR);
|
|
}
|
|
if (ecsr & RCAR_CAN_ECSR_CEF) {
|
|
CAN_STATS_CRC_ERROR_INC(dev);
|
|
sys_write8((uint8_t)~RCAR_CAN_ECSR_CEF,
|
|
config->reg_addr + RCAR_CAN_ECSR);
|
|
}
|
|
if (ecsr & RCAR_CAN_ECSR_AEF) {
|
|
CAN_STATS_ACK_ERROR_INC(dev);
|
|
sys_write8((uint8_t)~RCAR_CAN_ECSR_AEF,
|
|
config->reg_addr + RCAR_CAN_ECSR);
|
|
}
|
|
if (ecsr & RCAR_CAN_ECSR_FEF) {
|
|
CAN_STATS_FORM_ERROR_INC(dev);
|
|
sys_write8((uint8_t)~RCAR_CAN_ECSR_FEF,
|
|
config->reg_addr + RCAR_CAN_ECSR);
|
|
}
|
|
if (ecsr & RCAR_CAN_ECSR_SEF) {
|
|
CAN_STATS_STUFF_ERROR_INC(dev);
|
|
sys_write8((uint8_t)~RCAR_CAN_ECSR_SEF,
|
|
config->reg_addr + RCAR_CAN_ECSR);
|
|
}
|
|
|
|
sys_write8((uint8_t)~RCAR_CAN_EIFR_BEIF,
|
|
config->reg_addr + RCAR_CAN_EIFR);
|
|
}
|
|
if (eifr & RCAR_CAN_EIFR_EWIF) {
|
|
LOG_DBG("Error warning interrupt\n");
|
|
/* Clear interrupt condition */
|
|
sys_write8((uint8_t)~RCAR_CAN_EIFR_EWIF,
|
|
config->reg_addr + RCAR_CAN_EIFR);
|
|
can_rcar_state_change(dev, CAN_STATE_ERROR_WARNING);
|
|
}
|
|
if (eifr & RCAR_CAN_EIFR_EPIF) {
|
|
LOG_DBG("Error passive interrupt\n");
|
|
/* Clear interrupt condition */
|
|
sys_write8((uint8_t)~RCAR_CAN_EIFR_EPIF,
|
|
config->reg_addr + RCAR_CAN_EIFR);
|
|
can_rcar_state_change(dev, CAN_STATE_ERROR_PASSIVE);
|
|
}
|
|
if (eifr & RCAR_CAN_EIFR_BORIF) {
|
|
LOG_DBG("Bus-off recovery interrupt\n");
|
|
sys_write8(RCAR_CAN_IER_ERSIE, config->reg_addr + RCAR_CAN_IER);
|
|
/* Clear interrupt condition */
|
|
sys_write8((uint8_t)~RCAR_CAN_EIFR_BORIF,
|
|
config->reg_addr + RCAR_CAN_EIFR);
|
|
can_rcar_state_change(dev, CAN_STATE_BUS_OFF);
|
|
}
|
|
if (eifr & RCAR_CAN_EIFR_BOEIF) {
|
|
LOG_DBG("Bus-off entry interrupt\n");
|
|
sys_write8(RCAR_CAN_IER_ERSIE, config->reg_addr + RCAR_CAN_IER);
|
|
/* Clear interrupt condition */
|
|
sys_write8((uint8_t)~RCAR_CAN_EIFR_BOEIF,
|
|
config->reg_addr + RCAR_CAN_EIFR);
|
|
can_rcar_state_change(dev, CAN_STATE_BUS_OFF);
|
|
}
|
|
if (eifr & RCAR_CAN_EIFR_ORIF) {
|
|
LOG_DBG("Receive overrun error interrupt\n");
|
|
sys_write8((uint8_t)~RCAR_CAN_EIFR_ORIF,
|
|
config->reg_addr + RCAR_CAN_EIFR);
|
|
}
|
|
if (eifr & RCAR_CAN_EIFR_OLIF) {
|
|
LOG_DBG("Overload Frame Transmission error interrupt\n");
|
|
sys_write8((uint8_t)~RCAR_CAN_EIFR_OLIF,
|
|
config->reg_addr + RCAR_CAN_EIFR);
|
|
}
|
|
if (eifr & RCAR_CAN_EIFR_BLIF) {
|
|
LOG_DBG("Bus lock detected interrupt\n");
|
|
sys_write8((uint8_t)~RCAR_CAN_EIFR_BLIF,
|
|
config->reg_addr + RCAR_CAN_EIFR);
|
|
}
|
|
}
|
|
|
|
static void can_rcar_rx_filter_isr(const struct device *dev,
|
|
struct can_rcar_data *data,
|
|
const struct can_frame *frame)
|
|
{
|
|
struct can_frame tmp_frame;
|
|
uint8_t i;
|
|
|
|
for (i = 0; i < CONFIG_CAN_RCAR_MAX_FILTER; i++) {
|
|
if (data->rx_callback[i] == NULL) {
|
|
continue;
|
|
}
|
|
|
|
if (!can_utils_filter_match(frame,
|
|
&data->filter[i])) {
|
|
continue; /* filter did not match */
|
|
}
|
|
/* Make a temporary copy in case the user
|
|
* modifies the message.
|
|
*/
|
|
tmp_frame = *frame;
|
|
data->rx_callback[i](dev, &tmp_frame, data->rx_callback_arg[i]);
|
|
}
|
|
}
|
|
|
|
static void can_rcar_rx_isr(const struct device *dev)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
struct can_frame frame = {0};
|
|
uint32_t val;
|
|
int i;
|
|
|
|
val = sys_read32(config->reg_addr + RCAR_CAN_MB_60);
|
|
if (val & RCAR_CAN_MB_IDE) {
|
|
frame.flags |= CAN_FRAME_IDE;
|
|
frame.id = val & RCAR_CAN_MB_EID_MASK;
|
|
} else {
|
|
frame.id = (val & RCAR_CAN_MB_SID_MASK) >> RCAR_CAN_MB_SID_SHIFT;
|
|
}
|
|
|
|
if (val & RCAR_CAN_MB_RTR) {
|
|
frame.flags |= CAN_FRAME_RTR;
|
|
}
|
|
|
|
frame.dlc = sys_read16(config->reg_addr +
|
|
RCAR_CAN_MB_60 + RCAR_CAN_MB_DLC_OFFSET) & 0xF;
|
|
|
|
/* Be paranoid doc states that any value greater than 8
|
|
* should be considered as 8 bytes.
|
|
*/
|
|
if (frame.dlc > CAN_MAX_DLC) {
|
|
frame.dlc = CAN_MAX_DLC;
|
|
}
|
|
|
|
for (i = 0; i < frame.dlc; i++) {
|
|
frame.data[i] = sys_read8(config->reg_addr +
|
|
RCAR_CAN_MB_60 + RCAR_CAN_MB_DATA_OFFSET + i);
|
|
}
|
|
#if defined(CONFIG_CAN_RX_TIMESTAMP)
|
|
/* read upper byte */
|
|
frame.timestamp = sys_read8(config->reg_addr +
|
|
RCAR_CAN_MB_60 + RCAR_CAN_MB_TSH_OFFSET) << 8;
|
|
/* and then read lower byte */
|
|
frame.timestamp |= sys_read8(config->reg_addr +
|
|
RCAR_CAN_MB_60 + RCAR_CAN_MB_TSL_OFFSET);
|
|
#endif
|
|
/* Increment CPU side pointer */
|
|
sys_write8(0xff, config->reg_addr + RCAR_CAN_RFPCR);
|
|
|
|
can_rcar_rx_filter_isr(dev, data, &frame);
|
|
}
|
|
|
|
static void can_rcar_isr(const struct device *dev)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
uint8_t isr, unsent;
|
|
|
|
isr = sys_read8(config->reg_addr + RCAR_CAN_ISR);
|
|
if (isr & RCAR_CAN_ISR_ERSF) {
|
|
/* Clear the Error interrupt */
|
|
isr &= ~RCAR_CAN_ISR_ERSF;
|
|
sys_write8(isr, config->reg_addr + RCAR_CAN_ISR);
|
|
can_rcar_error(dev);
|
|
}
|
|
if (isr & RCAR_CAN_ISR_TXFF) {
|
|
/* Check for sent messages */
|
|
while (1) {
|
|
unsent = sys_read8(config->reg_addr + RCAR_CAN_TFCR);
|
|
unsent = (unsent & RCAR_CAN_TFCR_TFUST) >>
|
|
RCAR_CAN_TFCR_TFUST_SHIFT;
|
|
if (data->tx_unsent <= unsent) {
|
|
break;
|
|
}
|
|
can_rcar_tx_done(dev);
|
|
}
|
|
|
|
/* Clear the Tx interrupt */
|
|
isr = sys_read8(config->reg_addr + RCAR_CAN_ISR);
|
|
isr &= ~RCAR_CAN_ISR_TXFF;
|
|
sys_write8(isr, config->reg_addr + RCAR_CAN_ISR);
|
|
}
|
|
if (isr & RCAR_CAN_ISR_RXFF) {
|
|
/* while there is unread messages */
|
|
while (!(sys_read8(config->reg_addr + RCAR_CAN_RFCR)
|
|
& RCAR_CAN_RFCR_RFEST)) {
|
|
can_rcar_rx_isr(dev);
|
|
}
|
|
/* Clear the Rx interrupt */
|
|
isr = sys_read8(config->reg_addr + RCAR_CAN_ISR);
|
|
isr &= ~RCAR_CAN_ISR_RXFF;
|
|
sys_write8(isr, config->reg_addr + RCAR_CAN_ISR);
|
|
}
|
|
}
|
|
|
|
static int can_rcar_leave_sleep_mode(const struct can_rcar_cfg *config)
|
|
{
|
|
uint16_t ctlr, str;
|
|
int i;
|
|
|
|
ctlr = can_rcar_read16(config, RCAR_CAN_CTLR);
|
|
ctlr &= ~RCAR_CAN_CTLR_SLPM;
|
|
can_rcar_write16(config, RCAR_CAN_CTLR, ctlr);
|
|
for (i = 0; i < MAX_STR_READS; i++) {
|
|
str = can_rcar_read16(config, RCAR_CAN_STR);
|
|
if (!(str & RCAR_CAN_STR_SLPST)) {
|
|
return 0;
|
|
}
|
|
}
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static int can_rcar_enter_reset_mode(const struct can_rcar_cfg *config, bool force)
|
|
{
|
|
uint16_t ctlr;
|
|
int i;
|
|
|
|
ctlr = can_rcar_read16(config, RCAR_CAN_CTLR);
|
|
ctlr &= ~RCAR_CAN_CTLR_CANM_MASK;
|
|
ctlr |= RCAR_CAN_CTLR_CANM_RESET;
|
|
if (force) {
|
|
ctlr |= RCAR_CAN_CTLR_CANM_HALT;
|
|
}
|
|
can_rcar_write16(config, RCAR_CAN_CTLR, ctlr);
|
|
for (i = 0; i < MAX_STR_READS; i++) {
|
|
if (can_rcar_read16(config, RCAR_CAN_STR) & RCAR_CAN_STR_RSTST) {
|
|
return 0;
|
|
}
|
|
}
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static int can_rcar_enter_halt_mode(const struct can_rcar_cfg *config)
|
|
{
|
|
uint16_t ctlr;
|
|
int i;
|
|
|
|
ctlr = can_rcar_read16(config, RCAR_CAN_CTLR);
|
|
ctlr &= ~RCAR_CAN_CTLR_CANM_MASK;
|
|
ctlr |= RCAR_CAN_CTLR_CANM_HALT;
|
|
can_rcar_write16(config, RCAR_CAN_CTLR, ctlr);
|
|
|
|
/* Wait for controller to apply high bit timing settings */
|
|
k_usleep(1);
|
|
|
|
for (i = 0; i < MAX_STR_READS; i++) {
|
|
if (can_rcar_read16(config, RCAR_CAN_STR) & RCAR_CAN_STR_HLTST) {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static int can_rcar_enter_operation_mode(const struct can_rcar_cfg *config)
|
|
{
|
|
uint16_t ctlr, str;
|
|
int i;
|
|
|
|
ctlr = can_rcar_read16(config, RCAR_CAN_CTLR);
|
|
ctlr &= ~RCAR_CAN_CTLR_CANM_MASK;
|
|
can_rcar_write16(config, RCAR_CAN_CTLR, ctlr);
|
|
|
|
/* Wait for controller to apply high bit timing settings */
|
|
k_usleep(1);
|
|
|
|
for (i = 0; i < MAX_STR_READS; i++) {
|
|
str = can_rcar_read16(config, RCAR_CAN_STR);
|
|
if (!(str & RCAR_CAN_CTLR_CANM_MASK)) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == MAX_STR_READS) {
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Enable Rx and Tx FIFO */
|
|
sys_write8(RCAR_CAN_RFCR_RFE, config->reg_addr + RCAR_CAN_RFCR);
|
|
sys_write8(RCAR_CAN_TFCR_TFE, config->reg_addr + RCAR_CAN_TFCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int can_rcar_get_capabilities(const struct device *dev, can_mode_t *cap)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
*cap = CAN_MODE_NORMAL | CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int can_rcar_start(const struct device *dev)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
int ret;
|
|
|
|
if (data->started) {
|
|
return -EALREADY;
|
|
}
|
|
|
|
if (config->phy != NULL) {
|
|
ret = can_transceiver_enable(config->phy);
|
|
if (ret != 0) {
|
|
LOG_ERR("failed to enable CAN transceiver (err %d)", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
k_mutex_lock(&data->inst_mutex, K_FOREVER);
|
|
|
|
ret = can_rcar_enter_operation_mode(config);
|
|
if (ret != 0) {
|
|
LOG_ERR("failed to enter operation mode (err %d)", ret);
|
|
|
|
if (config->phy != NULL) {
|
|
/* Attempt to disable the CAN transceiver in case of error */
|
|
(void)can_transceiver_disable(config->phy);
|
|
}
|
|
} else {
|
|
data->started = true;
|
|
}
|
|
|
|
k_mutex_unlock(&data->inst_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int can_rcar_stop(const struct device *dev)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
int ret;
|
|
|
|
if (!data->started) {
|
|
return -EALREADY;
|
|
}
|
|
|
|
k_mutex_lock(&data->inst_mutex, K_FOREVER);
|
|
|
|
ret = can_rcar_enter_halt_mode(config);
|
|
if (ret != 0) {
|
|
LOG_ERR("failed to enter halt mode (err %d)", ret);
|
|
k_mutex_unlock(&data->inst_mutex);
|
|
return ret;
|
|
}
|
|
|
|
data->started = false;
|
|
|
|
k_mutex_unlock(&data->inst_mutex);
|
|
|
|
if (config->phy != NULL) {
|
|
ret = can_transceiver_disable(config->phy);
|
|
if (ret != 0) {
|
|
LOG_ERR("failed to disable CAN transceiver (err %d)", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int can_rcar_set_mode(const struct device *dev, can_mode_t mode)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
uint8_t tcr = 0;
|
|
int ret = 0;
|
|
|
|
if ((mode & ~(CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY)) != 0) {
|
|
LOG_ERR("Unsupported mode: 0x%08x", mode);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (data->started) {
|
|
return -EBUSY;
|
|
}
|
|
|
|
k_mutex_lock(&data->inst_mutex, K_FOREVER);
|
|
|
|
if ((mode & (CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY)) ==
|
|
(CAN_MODE_LOOPBACK | CAN_MODE_LISTENONLY)) {
|
|
LOG_ERR("Combination of loopback and listenonly modes not supported");
|
|
ret = -ENOTSUP;
|
|
goto unlock;
|
|
} else if ((mode & CAN_MODE_LOOPBACK) != 0) {
|
|
/* Loopback mode */
|
|
tcr = RCAR_CAN_TCR_INT_LOOP | RCAR_CAN_TCR_TSTE;
|
|
} else if ((mode & CAN_MODE_LISTENONLY) != 0) {
|
|
/* Listen-only mode */
|
|
tcr = RCAR_CAN_TCR_LISTEN_ONLY | RCAR_CAN_TCR_TSTE;
|
|
} else {
|
|
/* Normal mode */
|
|
tcr = 0;
|
|
}
|
|
|
|
sys_write8(tcr, config->reg_addr + RCAR_CAN_TCR);
|
|
|
|
unlock:
|
|
k_mutex_unlock(&data->inst_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Bit Configuration Register settings */
|
|
#define RCAR_CAN_BCR_TSEG1(x) (((x) & 0x0f) << 20)
|
|
#define RCAR_CAN_BCR_BPR(x) (((x) & 0x3ff) << 8)
|
|
#define RCAR_CAN_BCR_SJW(x) (((x) & 0x3) << 4)
|
|
#define RCAR_CAN_BCR_TSEG2(x) ((x) & 0x07)
|
|
|
|
static void can_rcar_set_bittiming(const struct can_rcar_cfg *config,
|
|
const struct can_timing *timing)
|
|
{
|
|
uint32_t bcr;
|
|
|
|
bcr = RCAR_CAN_BCR_TSEG1(timing->phase_seg1 + timing->prop_seg - 1) |
|
|
RCAR_CAN_BCR_BPR(timing->prescaler - 1) |
|
|
RCAR_CAN_BCR_SJW(timing->sjw - 1) |
|
|
RCAR_CAN_BCR_TSEG2(timing->phase_seg2 - 1);
|
|
|
|
/* Don't overwrite CLKR with 32-bit BCR access; CLKR has 8-bit access.
|
|
* All the registers are big-endian but they get byte-swapped on 32-bit
|
|
* read/write (but not on 8-bit, contrary to the manuals)...
|
|
*/
|
|
sys_write32((bcr << 8) | RCAR_CAN_CLKR_CLKP2,
|
|
config->reg_addr + RCAR_CAN_BCR);
|
|
}
|
|
|
|
static int can_rcar_set_timing(const struct device *dev,
|
|
const struct can_timing *timing)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
int ret = 0;
|
|
|
|
struct reg_backup {
|
|
uint32_t address;
|
|
uint8_t value;
|
|
};
|
|
|
|
struct reg_backup regs[3] = { { RCAR_CAN_TCR, 0 }, { RCAR_CAN_TFCR, 0 }
|
|
, { RCAR_CAN_RFCR, 0 } };
|
|
|
|
if (data->started) {
|
|
return -EBUSY;
|
|
}
|
|
|
|
k_mutex_lock(&data->inst_mutex, K_FOREVER);
|
|
|
|
/* Changing bittiming should be done in reset mode.
|
|
* Switching to reset mode is resetting loopback mode (TCR),
|
|
* transmit and receive FIFOs (TFCR and RFCR).
|
|
* Storing these reg values to restore them once back in halt mode.
|
|
*/
|
|
for (int i = 0; i < 3; i++) {
|
|
regs[i].value = sys_read8(config->reg_addr + regs[i].address);
|
|
}
|
|
|
|
/* Switching to reset mode */
|
|
ret = can_rcar_enter_reset_mode(config, true);
|
|
if (ret != 0) {
|
|
goto unlock;
|
|
}
|
|
|
|
/* Setting bit timing */
|
|
can_rcar_set_bittiming(config, timing);
|
|
|
|
/* Restoring registers must be done in halt mode */
|
|
ret = can_rcar_enter_halt_mode(config);
|
|
if (ret) {
|
|
goto unlock;
|
|
}
|
|
|
|
/* Restoring registers */
|
|
for (int i = 0; i < 3; i++) {
|
|
sys_write8(regs[i].value, config->reg_addr + regs[i].address);
|
|
}
|
|
|
|
unlock:
|
|
k_mutex_unlock(&data->inst_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void can_rcar_set_state_change_callback(const struct device *dev,
|
|
can_state_change_callback_t cb,
|
|
void *user_data)
|
|
{
|
|
struct can_rcar_data *data = dev->data;
|
|
|
|
data->state_change_cb = cb;
|
|
data->state_change_cb_data = user_data;
|
|
}
|
|
|
|
static int can_rcar_get_state(const struct device *dev, enum can_state *state,
|
|
struct can_bus_err_cnt *err_cnt)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
|
|
if (state != NULL) {
|
|
if (!data->started) {
|
|
*state = CAN_STATE_STOPPED;
|
|
} else {
|
|
*state = data->state;
|
|
}
|
|
}
|
|
|
|
if (err_cnt != NULL) {
|
|
can_rcar_get_error_count(config, err_cnt);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_CAN_AUTO_BUS_OFF_RECOVERY
|
|
static int can_rcar_recover(const struct device *dev, k_timeout_t timeout)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
int64_t start_time;
|
|
int ret;
|
|
|
|
if (!data->started) {
|
|
return -ENETDOWN;
|
|
}
|
|
|
|
if (data->state != CAN_STATE_BUS_OFF) {
|
|
return 0;
|
|
}
|
|
|
|
if (k_mutex_lock(&data->inst_mutex, K_FOREVER)) {
|
|
return -EAGAIN;
|
|
}
|
|
|
|
start_time = k_uptime_ticks();
|
|
while (data->state == CAN_STATE_BUS_OFF) {
|
|
ret = can_rcar_enter_operation_mode(config);
|
|
if (ret != 0) {
|
|
goto done;
|
|
}
|
|
|
|
if (!K_TIMEOUT_EQ(timeout, K_FOREVER) &&
|
|
k_uptime_ticks() - start_time >= timeout.ticks) {
|
|
ret = -EAGAIN;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
done:
|
|
k_mutex_unlock(&data->inst_mutex);
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_CAN_AUTO_BUS_OFF_RECOVERY */
|
|
|
|
static int can_rcar_send(const struct device *dev, const struct can_frame *frame,
|
|
k_timeout_t timeout, can_tx_callback_t callback,
|
|
void *user_data)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
struct can_rcar_tx_cb *tx_cb;
|
|
uint32_t identifier;
|
|
int i;
|
|
|
|
LOG_DBG("Sending %d bytes on %s. "
|
|
"Id: 0x%x, "
|
|
"ID type: %s, "
|
|
"Remote Frame: %s"
|
|
, frame->dlc, dev->name
|
|
, frame->id
|
|
, (frame->flags & CAN_FRAME_IDE) != 0 ?
|
|
"extended" : "standard"
|
|
, (frame->flags & CAN_FRAME_RTR) != 0 ? "yes" : "no");
|
|
|
|
__ASSERT_NO_MSG(callback != NULL);
|
|
__ASSERT(frame->dlc == 0U || frame->data != NULL, "Dataptr is null");
|
|
|
|
if (frame->dlc > CAN_MAX_DLC) {
|
|
LOG_ERR("DLC of %d exceeds maximum (%d)",
|
|
frame->dlc, CAN_MAX_DLC);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((frame->flags & ~(CAN_FRAME_IDE | CAN_FRAME_RTR)) != 0) {
|
|
LOG_ERR("unsupported CAN frame flags 0x%02x", frame->flags);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (!data->started) {
|
|
return -ENETDOWN;
|
|
}
|
|
|
|
/* Wait for a slot into the tx FIFO */
|
|
if (k_sem_take(&data->tx_sem, timeout) != 0) {
|
|
return -EAGAIN;
|
|
}
|
|
|
|
k_mutex_lock(&data->inst_mutex, K_FOREVER);
|
|
tx_cb = &data->tx_cb[data->tx_head];
|
|
tx_cb->cb = callback;
|
|
tx_cb->cb_arg = user_data;
|
|
|
|
data->tx_head++;
|
|
if (data->tx_head >= RCAR_CAN_FIFO_DEPTH) {
|
|
data->tx_head = 0;
|
|
}
|
|
|
|
if ((frame->flags & CAN_FRAME_IDE) != 0) {
|
|
identifier = frame->id | RCAR_CAN_MB_IDE;
|
|
} else {
|
|
identifier = frame->id << RCAR_CAN_MB_SID_SHIFT;
|
|
}
|
|
|
|
if ((frame->flags & CAN_FRAME_RTR) != 0) {
|
|
identifier |= RCAR_CAN_MB_RTR;
|
|
}
|
|
|
|
sys_write32(identifier, config->reg_addr + RCAR_CAN_MB_56);
|
|
|
|
sys_write16(frame->dlc, config->reg_addr
|
|
+ RCAR_CAN_MB_56 + RCAR_CAN_MB_DLC_OFFSET);
|
|
|
|
for (i = 0; i < frame->dlc; i++) {
|
|
sys_write8(frame->data[i], config->reg_addr
|
|
+ RCAR_CAN_MB_56 + RCAR_CAN_MB_DATA_OFFSET + i);
|
|
}
|
|
|
|
compiler_barrier();
|
|
data->tx_unsent++;
|
|
/* Start Tx: increment the CPU-side pointer for the transmit FIFO
|
|
* to the next mailbox location
|
|
*/
|
|
sys_write8(0xff, config->reg_addr + RCAR_CAN_TFPCR);
|
|
|
|
k_mutex_unlock(&data->inst_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int can_rcar_add_rx_filter_unlocked(const struct device *dev,
|
|
can_rx_callback_t cb,
|
|
void *cb_arg,
|
|
const struct can_filter *filter)
|
|
{
|
|
struct can_rcar_data *data = dev->data;
|
|
int i;
|
|
|
|
for (i = 0; i < CONFIG_CAN_RCAR_MAX_FILTER; i++) {
|
|
if (data->rx_callback[i] == NULL) {
|
|
data->rx_callback_arg[i] = cb_arg;
|
|
data->filter[i] = *filter;
|
|
compiler_barrier();
|
|
data->rx_callback[i] = cb;
|
|
return i;
|
|
}
|
|
}
|
|
|
|
return -ENOSPC;
|
|
}
|
|
|
|
static int can_rcar_add_rx_filter(const struct device *dev, can_rx_callback_t cb,
|
|
void *cb_arg, const struct can_filter *filter)
|
|
{
|
|
struct can_rcar_data *data = dev->data;
|
|
int filter_id;
|
|
|
|
if ((filter->flags & ~(CAN_FILTER_IDE | CAN_FILTER_DATA)) != 0) {
|
|
LOG_ERR("unsupported CAN filter flags 0x%02x", filter->flags);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
k_mutex_lock(&data->rx_mutex, K_FOREVER);
|
|
filter_id = can_rcar_add_rx_filter_unlocked(dev, cb, cb_arg, filter);
|
|
k_mutex_unlock(&data->rx_mutex);
|
|
return filter_id;
|
|
}
|
|
|
|
static void can_rcar_remove_rx_filter(const struct device *dev, int filter_id)
|
|
{
|
|
struct can_rcar_data *data = dev->data;
|
|
|
|
if (filter_id >= CONFIG_CAN_RCAR_MAX_FILTER) {
|
|
return;
|
|
}
|
|
|
|
k_mutex_lock(&data->rx_mutex, K_FOREVER);
|
|
compiler_barrier();
|
|
data->rx_callback[filter_id] = NULL;
|
|
k_mutex_unlock(&data->rx_mutex);
|
|
}
|
|
|
|
static int can_rcar_init(const struct device *dev)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
struct can_rcar_data *data = dev->data;
|
|
struct can_timing timing;
|
|
int ret;
|
|
uint16_t ctlr;
|
|
|
|
k_mutex_init(&data->inst_mutex);
|
|
k_mutex_init(&data->rx_mutex);
|
|
k_sem_init(&data->tx_sem, RCAR_CAN_FIFO_DEPTH, RCAR_CAN_FIFO_DEPTH);
|
|
|
|
data->tx_head = 0;
|
|
data->tx_tail = 0;
|
|
data->tx_unsent = 0;
|
|
|
|
memset(data->rx_callback, 0, sizeof(data->rx_callback));
|
|
data->state = CAN_STATE_ERROR_ACTIVE;
|
|
data->state_change_cb = NULL;
|
|
data->state_change_cb_data = NULL;
|
|
|
|
if (config->phy != NULL) {
|
|
if (!device_is_ready(config->phy)) {
|
|
LOG_ERR("CAN transceiver not ready");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (!device_is_ready(config->clock_dev)) {
|
|
LOG_ERR("clock control device not ready");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Configure dt provided device signals when available */
|
|
ret = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* reset the registers */
|
|
ret = clock_control_off(config->clock_dev,
|
|
(clock_control_subsys_t *)&config->mod_clk);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = clock_control_on(config->clock_dev,
|
|
(clock_control_subsys_t *)&config->mod_clk);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = clock_control_on(config->clock_dev,
|
|
(clock_control_subsys_t *)&config->bus_clk);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = can_rcar_enter_reset_mode(config, false);
|
|
__ASSERT(!ret, "Fail to set CAN controller to reset mode");
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
ret = can_rcar_leave_sleep_mode(config);
|
|
__ASSERT(!ret, "Fail to leave CAN controller from sleep mode");
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
timing.sjw = config->sjw;
|
|
if (config->sample_point) {
|
|
ret = can_calc_timing(dev, &timing, config->bus_speed,
|
|
config->sample_point);
|
|
if (ret == -EINVAL) {
|
|
LOG_ERR("Can't find timing for given param");
|
|
return -EIO;
|
|
}
|
|
LOG_DBG("Presc: %d, TS1: %d, TS2: %d",
|
|
timing.prescaler, timing.phase_seg1, timing.phase_seg2);
|
|
LOG_DBG("Sample-point err : %d", ret);
|
|
} else {
|
|
timing.prop_seg = config->prop_seg;
|
|
timing.phase_seg1 = config->phase_seg1;
|
|
timing.phase_seg2 = config->phase_seg2;
|
|
ret = can_calc_prescaler(dev, &timing, config->bus_speed);
|
|
if (ret) {
|
|
LOG_WRN("Bitrate error: %d", ret);
|
|
}
|
|
}
|
|
|
|
ret = can_rcar_set_timing(dev, &timing);
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
ret = can_rcar_set_mode(dev, CAN_MODE_NORMAL);
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
ctlr = can_rcar_read16(config, RCAR_CAN_CTLR);
|
|
ctlr |= RCAR_CAN_CTLR_IDFM_MIXED; /* Select mixed ID mode */
|
|
#ifndef CONFIG_CAN_AUTO_BUS_OFF_RECOVERY
|
|
ctlr |= RCAR_CAN_CTLR_BOM_ENT; /* Entry to halt mode automatically at bus-off */
|
|
#endif
|
|
ctlr |= RCAR_CAN_CTLR_MBM; /* Select FIFO mailbox mode */
|
|
ctlr |= RCAR_CAN_CTLR_MLM; /* Overrun mode */
|
|
ctlr &= ~RCAR_CAN_CTLR_SLPM; /* Clear CAN Sleep mode */
|
|
can_rcar_write16(config, RCAR_CAN_CTLR, ctlr);
|
|
|
|
/* Accept all SID and EID */
|
|
sys_write32(0, config->reg_addr + RCAR_CAN_MKR8);
|
|
sys_write32(0, config->reg_addr + RCAR_CAN_MKR9);
|
|
/* In FIFO mailbox mode, write "0" to bits 24 to 31 */
|
|
sys_write32(0, config->reg_addr + RCAR_CAN_MKIVLR0);
|
|
sys_write32(0, config->reg_addr + RCAR_CAN_MKIVLR1);
|
|
/* Accept standard and extended ID frames, but not
|
|
* remote frame.
|
|
*/
|
|
sys_write32(0, config->reg_addr + RCAR_CAN_FIDCR0);
|
|
sys_write32(RCAR_CAN_FIDCR_IDE,
|
|
config->reg_addr + RCAR_CAN_FIDCR1);
|
|
|
|
/* Enable and configure FIFO mailbox interrupts Rx and Tx */
|
|
sys_write32(RCAR_CAN_MIER1_RXFIE | RCAR_CAN_MIER1_TXFIE,
|
|
config->reg_addr + RCAR_CAN_MIER1);
|
|
|
|
sys_write8(RCAR_CAN_IER_ERSIE | RCAR_CAN_IER_RXFIE | RCAR_CAN_IER_TXFIE,
|
|
config->reg_addr + RCAR_CAN_IER);
|
|
|
|
/* Accumulate error codes */
|
|
sys_write8(RCAR_CAN_ECSR_EDPM, config->reg_addr + RCAR_CAN_ECSR);
|
|
|
|
/* Enable interrupts for all type of errors */
|
|
sys_write8(0xFF, config->reg_addr + RCAR_CAN_EIER);
|
|
|
|
config->init_func(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int can_rcar_get_core_clock(const struct device *dev, uint32_t *rate)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
|
|
*rate = config->bus_clk.rate;
|
|
return 0;
|
|
}
|
|
|
|
static int can_rcar_get_max_filters(const struct device *dev, bool ide)
|
|
{
|
|
ARG_UNUSED(ide);
|
|
|
|
return CONFIG_CAN_RCAR_MAX_FILTER;
|
|
}
|
|
|
|
static int can_rcar_get_max_bitrate(const struct device *dev, uint32_t *max_bitrate)
|
|
{
|
|
const struct can_rcar_cfg *config = dev->config;
|
|
|
|
*max_bitrate = config->max_bitrate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct can_driver_api can_rcar_driver_api = {
|
|
.get_capabilities = can_rcar_get_capabilities,
|
|
.start = can_rcar_start,
|
|
.stop = can_rcar_stop,
|
|
.set_mode = can_rcar_set_mode,
|
|
.set_timing = can_rcar_set_timing,
|
|
.send = can_rcar_send,
|
|
.add_rx_filter = can_rcar_add_rx_filter,
|
|
.remove_rx_filter = can_rcar_remove_rx_filter,
|
|
.get_state = can_rcar_get_state,
|
|
#ifndef CONFIG_CAN_AUTO_BUS_OFF_RECOVERY
|
|
.recover = can_rcar_recover,
|
|
#endif
|
|
.set_state_change_callback = can_rcar_set_state_change_callback,
|
|
.get_core_clock = can_rcar_get_core_clock,
|
|
.get_max_filters = can_rcar_get_max_filters,
|
|
.get_max_bitrate = can_rcar_get_max_bitrate,
|
|
.timing_min = {
|
|
.sjw = 0x1,
|
|
.prop_seg = 0x00,
|
|
.phase_seg1 = 0x04,
|
|
.phase_seg2 = 0x02,
|
|
.prescaler = 0x01
|
|
},
|
|
.timing_max = {
|
|
.sjw = 0x4,
|
|
.prop_seg = 0x00,
|
|
.phase_seg1 = 0x10,
|
|
.phase_seg2 = 0x08,
|
|
.prescaler = 0x400
|
|
}
|
|
};
|
|
|
|
/* Device Instantiation */
|
|
#define CAN_RCAR_INIT(n) \
|
|
PINCTRL_DT_INST_DEFINE(n); \
|
|
static void can_rcar_##n##_init(const struct device *dev); \
|
|
static const struct can_rcar_cfg can_rcar_cfg_##n = { \
|
|
.reg_addr = DT_INST_REG_ADDR(n), \
|
|
.reg_size = DT_INST_REG_SIZE(n), \
|
|
.init_func = can_rcar_##n##_init, \
|
|
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(n)), \
|
|
.mod_clk.module = \
|
|
DT_INST_CLOCKS_CELL_BY_IDX(n, 0, module), \
|
|
.mod_clk.domain = \
|
|
DT_INST_CLOCKS_CELL_BY_IDX(n, 0, domain), \
|
|
.bus_clk.module = \
|
|
DT_INST_CLOCKS_CELL_BY_IDX(n, 1, module), \
|
|
.bus_clk.domain = \
|
|
DT_INST_CLOCKS_CELL_BY_IDX(n, 1, domain), \
|
|
.bus_clk.rate = 40000000, \
|
|
.bus_speed = DT_INST_PROP(n, bus_speed), \
|
|
.sjw = DT_INST_PROP(n, sjw), \
|
|
.prop_seg = DT_INST_PROP_OR(n, prop_seg, 0), \
|
|
.phase_seg1 = DT_INST_PROP_OR(n, phase_seg1, 0), \
|
|
.phase_seg2 = DT_INST_PROP_OR(n, phase_seg2, 0), \
|
|
.sample_point = DT_INST_PROP_OR(n, sample_point, 0), \
|
|
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \
|
|
.phy = DEVICE_DT_GET_OR_NULL(DT_INST_PHANDLE(n, phys)), \
|
|
.max_bitrate = DT_INST_CAN_TRANSCEIVER_MAX_BITRATE(n, 1000000), \
|
|
}; \
|
|
static struct can_rcar_data can_rcar_data_##n; \
|
|
\
|
|
CAN_DEVICE_DT_INST_DEFINE(n, can_rcar_init, \
|
|
NULL, \
|
|
&can_rcar_data_##n, \
|
|
&can_rcar_cfg_##n, \
|
|
POST_KERNEL, \
|
|
CONFIG_CAN_INIT_PRIORITY, \
|
|
&can_rcar_driver_api \
|
|
); \
|
|
static void can_rcar_##n##_init(const struct device *dev) \
|
|
{ \
|
|
IRQ_CONNECT(DT_INST_IRQN(n), \
|
|
0, \
|
|
can_rcar_isr, \
|
|
DEVICE_DT_INST_GET(n), 0); \
|
|
\
|
|
irq_enable(DT_INST_IRQN(n)); \
|
|
}
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(CAN_RCAR_INIT)
|