zephyr/samples/drivers/flash_shell
Henrik Brix Andersen 9121b24269 samples: drivers: flash_shell: do not enable CONFIG_SERIAL
Do not enable CONFIG_SERIAL explicitly in the flash_shell sample. Leave
it up to the board definition to enable a suitable shell backend if
CONFIG_SHELL is enabled.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-12-02 23:20:32 -05:00
..
src
CMakeLists.txt
Kconfig
README.rst
prj.conf
sample.yaml

README.rst

.. _samples_flash_shell:

Flash Shell Sample
##################

Overview
********
This is a simple shell module that allows arbitrary boards with flash
driver support to explore the flash device.

Building and Running
********************

This project can be built and executed on as follows:

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/flash_shell
   :host-os: unix
   :board: qemu_x86
   :goals: run
   :compact:

Sample Output
=============

.. code-block:: console

    uart:~$ flash page_count
    Flash device contains 1024 pages.
    uart:~$ flash page_erase 1023
    Erasing page 1023 (start offset 0xffc00, size 0x400)
    uart:~$ flash page_write 1023 8 17 19 28 39
    Reading back written bytes:
    11 13 1c 27
    uart:~$ flash page_write 1023 4 77 9 1 2
    Reading back written bytes:
    4d 09 01 02
    uart:~$ flash page_read 1023 4 12
    4d 09 01 02 | 11 13 1c 27
    ff ff ff ff
    uart:~$ flash page_read 1023 0 16
    ff ff ff ff | 4d 09 01 02
    11 13 1c 27 | ff ff ff ff