zephyr

History

Kumar Gala a1b77fd589 zephyr: replace zephyr integer types with C99 types git grep -l 'u\(8\\|16\\|32\\|64\)_t' \| \ xargs sed -i "s/u\(8\\|16\\|32\\|64\)_t/uint\1_t/g" git grep -l 's\(8\\|16\\|32\\|64\)_t' \| \ xargs sed -i "s/s\(8\\|16\\|32\\|64\)_t/int\1_t/g" Signed-off-by: Kumar Gala <kumar.gala@linaro.org>		2020-06-08 08:23:57 -05:00
..
src	zephyr: replace zephyr integer types with C99 types	2020-06-08 08:23:57 -05:00
CMakeLists.txt	samples: make find_package(Zephyr...) REQUIRED	2020-05-29 10:47:25 +02:00
README.rst	…
prj.conf	…
prj_single.conf	…
sample.yaml	…

README.rst

.. _mpu_test:

Memory Protection Unit (MPU) TEST
#################################

Overview
********
This test provides a set options to check the correct MPU configuration
against the following security issues:

* Read at an address that is reserved in the memory map.
* Write into the boot Flash/ROM.
* Run code located in SRAM.

If the MPU configuration is correct each option selected ends up in an MPU
fault.

Building and Running
********************

This project can be built and executed as follows:

.. zephyr-app-commands::
   :zephyr-app: samples/mpu/mpu_test
   :board: v2m_beetle
   :goals: build flash
   :compact:

To build the single thread version, use the supplied configuration file for
single thread: :file:`prj_single.conf`:

.. zephyr-app-commands::
   :zephyr-app: samples/mpu/mpu_test
   :board: v2m_beetle
   :conf: prj_single.conf
   :goals: run
   :compact:

To build a version that allows writes to the flash device, edit
``prj.conf``, and follow the directions in the comments to enable the
proper configs.

Sample Output
=============

.. code-block:: console

  uart:~$ mpu read
  ***** BUS FAULT *****
    Precise data bus error
    BFAR Address: 0x24000000
  ***** Hardware exception *****
  Current thread ID = 0x20000400
  Faulting instruction address = 0x80004a8
  Fatal fault in thread 0x20000400! Aborting.