61 lines
1.6 KiB
YAML
61 lines
1.6 KiB
YAML
# Copyright (c) 2023 Vestas Wind Systems A/S
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
description: |
|
|
Texas Instruments TCAN4x5x SPI CAN FD controller.
|
|
|
|
Example:
|
|
&spi0 {
|
|
tcan4x5x: can@0 {
|
|
compatible = ti,tcan4x5x";
|
|
reg = <0>;
|
|
spi-max-frequency = <18000000>;
|
|
clock-frequency = <40000000>;
|
|
device-state-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
|
device-wake-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
|
|
int-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
bosch,mram-cfg = <0x0 15 15 5 5 0 10 10>;
|
|
status = "okay";
|
|
|
|
can-transceiver {
|
|
max-bitrate = <8000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
compatible: "ti,tcan4x5x"
|
|
|
|
include: ["bosch,m_can-base.yaml", "spi-device.yaml"]
|
|
|
|
properties:
|
|
clock-frequency:
|
|
type: int
|
|
enum:
|
|
- 20000000
|
|
- 40000000
|
|
required: true
|
|
description: |
|
|
TCAN4x5x oscillator clock frequency in Hz (20MHz or 40MHz).
|
|
|
|
device-state-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
GPIO connected to the TCAN4x5x nWKRQ output. This signal is active low.
|
|
|
|
device-wake-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
GPIO connected to the TCAN4x5x WAKE input. This signal is high-voltage, active high.
|
|
|
|
reset-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
GPIO connected to the TCAN4x5x RST input. This signal is active high.
|
|
|
|
int-gpios:
|
|
type: phandle-array
|
|
required: true
|
|
description: |
|
|
GPIO connected to the TCAN4x5x nINT interrupt output. This signal is open-drain, active low.
|