160 lines
4.7 KiB
ReStructuredText
160 lines
4.7 KiB
ReStructuredText
.. _adafruit_trinket_m0:
|
|
|
|
Adafruit Trinket M0
|
|
###################
|
|
|
|
Overview
|
|
********
|
|
|
|
The Adafruit Trinket M0 is a tiny (27 mm x 15 mm) ARM development
|
|
board with an onboard RGB LED, USB port, and range of I/O broken out
|
|
onto 5 pins.
|
|
|
|
.. image:: img/adafruit_trinket_m0.png
|
|
:width: 500px
|
|
:align: center
|
|
:alt: Adafruit Trinket M0
|
|
|
|
Hardware
|
|
********
|
|
|
|
- ATSAMD21E18A ARM Cortex-M0+ processor at 48 MHz
|
|
- 256 KiB flash memory and 32 KiB of RAM
|
|
- Internal trimmed 8 MHz oscillator
|
|
- A user LED
|
|
- An RGB DotStar LED
|
|
- Native USB port
|
|
- One reset button
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The adafruit_trinket_m0 board configuration supports the following hardware
|
|
features:
|
|
|
|
+-----------+------------+--------------------------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+======================================+
|
|
| NVIC | on-chip | nested vector interrupt controller |
|
|
+-----------+------------+--------------------------------------+
|
|
| Flash | on-chip | Can be used with NFFS to store files |
|
|
+-----------+------------+--------------------------------------+
|
|
| SYSTICK | on-chip | systick |
|
|
+-----------+------------+--------------------------------------+
|
|
| WDT | on-chip | Watchdog |
|
|
+-----------+------------+--------------------------------------+
|
|
| GPIO | on-chip | I/O ports |
|
|
+-----------+------------+--------------------------------------+
|
|
| USART | on-chip | Serial ports |
|
|
+-----------+------------+--------------------------------------+
|
|
| SPI | on-chip | Serial Peripheral Interface ports |
|
|
+-----------+------------+--------------------------------------+
|
|
| USB | on-chip | USB device |
|
|
+-----------+------------+--------------------------------------+
|
|
|
|
Other hardware features are not currently supported by Zephyr.
|
|
|
|
The default configuration can be found in the Kconfig file
|
|
:file:`boards/arm/adafruit_trinket_m0/adafruit_trinket_m0_defconfig`.
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
The `Adafruit Trinket M0 Learn site`_ has detailed information about
|
|
the board including `pinouts`_ and the `schematic`_.
|
|
|
|
System Clock
|
|
============
|
|
|
|
The SAMD21 MCU is configured to use the 8 MHz internal oscillator
|
|
with the on-chip PLL generating the 48 MHz system clock. The internal
|
|
APB and GCLK unit are set up in the same way as the upstream Arduino
|
|
libraries.
|
|
|
|
Serial Port
|
|
===========
|
|
|
|
The SAMD21 MCU has 6 SERCOM based USARTs. On the Trinket, SERCOM0 is
|
|
the Zephyr console and is available on pins 3 (RX) and 4 (TX).
|
|
SERCOM2 is available on pins 2 (RX) and 0 (TX).
|
|
|
|
SPI Port
|
|
========
|
|
|
|
The SAMD21 MCU has 6 SERCOM based SPIs. On the Trinket, SERCOM1 is
|
|
used to drive the DotStar RGB LED. SERCOM0 can be put into SPI mode
|
|
and used to connect to devices over pin 2 (MISO), pin 4 (MOSI), and
|
|
pin 3 (SCK).
|
|
|
|
USB Device Port
|
|
===============
|
|
|
|
The SAMD21 MCU has a USB device port that can be used to communicate
|
|
with a host PC. See the :ref:`usb-samples` sample applications for
|
|
more, such as the :ref:`usb_cdc-acm` sample which sets up a virtual
|
|
serial port that echos characters back to the host PC.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
The Trinket M0 ships the BOSSA compatible UF2 bootloader. The
|
|
bootloader can be entered by quickly tapping the reset button twice.
|
|
|
|
Flashing
|
|
========
|
|
|
|
#. Build the Zephyr kernel and the :ref:`hello_world` sample application:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: adafruit_trinket_m0
|
|
:goals: build
|
|
:compact:
|
|
|
|
#. Connect the Trinket M0 to your host computer using USB
|
|
|
|
#. Connect a 3.3 V USB to serial adapter to the board and to the
|
|
host. See the `Serial Port`_ section above for the board's pin
|
|
connections.
|
|
|
|
#. Run your favorite terminal program to listen for output. Under Linux the
|
|
terminal should be :code:`/dev/ttyACM0`. For example:
|
|
|
|
.. code-block:: console
|
|
|
|
$ minicom -D /dev/ttyACM0 -o
|
|
|
|
The -o option tells minicom not to send the modem initialization
|
|
string. Connection should be configured as follows:
|
|
|
|
- Speed: 115200
|
|
- Data: 8 bits
|
|
- Parity: None
|
|
- Stop bits: 1
|
|
|
|
#. Tap the reset button twice quickly to enter bootloader mode
|
|
|
|
#. Flash the image:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: adafruit_trinket_m0
|
|
:goals: flash
|
|
:compact:
|
|
|
|
You should see "Hello World! arm" in your terminal.
|
|
|
|
References
|
|
**********
|
|
|
|
.. target-notes::
|
|
|
|
.. _Adafruit Trinket M0 Learn site:
|
|
https://learn.adafruit.com/adafruit-trinket-m0-circuitpython-arduino
|
|
|
|
.. _pinouts:
|
|
https://learn.adafruit.com/assets/49778
|
|
|
|
.. _schematic:
|
|
https://learn.adafruit.com/assets/45723
|