455 lines
12 KiB
C
455 lines
12 KiB
C
/*
|
|
* Copyright (c) 2016 Linaro Limited.
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
#include <kernel.h>
|
|
|
|
#include <device.h>
|
|
#include <errno.h>
|
|
#include <gpio.h>
|
|
#include <init.h>
|
|
#include <soc.h>
|
|
#include <clock_control/arm_clock_control.h>
|
|
|
|
#include "gpio_cmsdk_ahb.h"
|
|
#include "gpio_utils.h"
|
|
|
|
/**
|
|
* @brief GPIO driver for ARM CMSDK AHB GPIO
|
|
*/
|
|
|
|
typedef void (*gpio_config_func_t)(struct device *port);
|
|
|
|
struct gpio_cmsdk_ahb_cfg {
|
|
volatile struct gpio_cmsdk_ahb *port;
|
|
gpio_config_func_t gpio_config_func;
|
|
/* GPIO Clock control in Active State */
|
|
struct arm_clock_control_t gpio_cc_as;
|
|
/* GPIO Clock control in Sleep State */
|
|
struct arm_clock_control_t gpio_cc_ss;
|
|
/* GPIO Clock control in Deep Sleep State */
|
|
struct arm_clock_control_t gpio_cc_dss;
|
|
};
|
|
|
|
struct gpio_cmsdk_ahb_dev_data {
|
|
/* list of callbacks */
|
|
sys_slist_t gpio_cb;
|
|
};
|
|
|
|
static void cmsdk_ahb_gpio_config(struct device *dev, uint32_t mask, int flags)
|
|
{
|
|
const struct gpio_cmsdk_ahb_cfg * const cfg = dev->config->config_info;
|
|
|
|
/* Disable the pin and return as setup is meaningless now */
|
|
if (flags & GPIO_PIN_DISABLE) {
|
|
cfg->port->altfuncset = mask;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Setup the pin direction
|
|
* Output Enable:
|
|
* 0 - Input
|
|
* 1 - Output
|
|
*/
|
|
if ((flags & GPIO_DIR_MASK) == GPIO_DIR_OUT) {
|
|
cfg->port->outenableset = mask;
|
|
} else {
|
|
cfg->port->outenableclr = mask;
|
|
}
|
|
|
|
/* Setup interrupt config */
|
|
if (flags & GPIO_INT) {
|
|
if (flags & GPIO_INT_DOUBLE_EDGE) {
|
|
/* FIXME: Not supported in this iteration */
|
|
} else {
|
|
/*
|
|
* Interrupt type:
|
|
* 0 - LOW or HIGH level
|
|
* 1 - For falling or rising
|
|
*/
|
|
if (flags & GPIO_INT_EDGE) {
|
|
cfg->port->inttypeclr = mask;
|
|
} else if (flags & GPIO_INT_LEVEL) {
|
|
cfg->port->inttypeset = mask;
|
|
}
|
|
/*
|
|
* Interrupt polarity:
|
|
* 0 - Low level or falling edge
|
|
* 1 - High level or rising edge
|
|
*/
|
|
if (flags & GPIO_INT_ACTIVE_LOW) {
|
|
cfg->port->intpolclr = mask;
|
|
} else if (flags & GPIO_INT_ACTIVE_HIGH) {
|
|
cfg->port->intpolset = mask;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Enable the pin last after pin setup */
|
|
if (flags & GPIO_PIN_ENABLE) {
|
|
cfg->port->altfuncclr = mask;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Configure pin or port
|
|
*
|
|
* @param dev Device struct
|
|
* @param access_op Access operation (pin or port)
|
|
* @param pin The pin number
|
|
* @param flags Flags of pin or port
|
|
*
|
|
* @return 0 if successful, failed otherwise
|
|
*/
|
|
static int gpio_cmsdk_ahb_config(struct device *dev, int access_op,
|
|
uint32_t pin, int flags)
|
|
{
|
|
switch (access_op) {
|
|
case GPIO_ACCESS_BY_PIN:
|
|
cmsdk_ahb_gpio_config(dev, BIT(pin), flags);
|
|
break;
|
|
case GPIO_ACCESS_BY_PORT:
|
|
cmsdk_ahb_gpio_config(dev, (0xFFFF), flags);
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief Set the pin or port output
|
|
*
|
|
* @param dev Device struct
|
|
* @param access_op Access operation (pin or port)
|
|
* @param pin The pin number
|
|
* @param value Value to set (0 or 1)
|
|
*
|
|
* @return 0 if successful, failed otherwise
|
|
*/
|
|
static int gpio_cmsdk_ahb_write(struct device *dev, int access_op,
|
|
uint32_t pin, uint32_t value)
|
|
{
|
|
const struct gpio_cmsdk_ahb_cfg * const cfg = dev->config->config_info;
|
|
uint32_t key;
|
|
|
|
switch (access_op) {
|
|
case GPIO_ACCESS_BY_PIN:
|
|
if (value) {
|
|
/*
|
|
* The irq_lock() here is required to prevent concurrent
|
|
* callers to corrupt the pin states.
|
|
*/
|
|
key = irq_lock();
|
|
/* set the pin */
|
|
cfg->port->dataout |= BIT(pin);
|
|
irq_unlock(key);
|
|
} else {
|
|
/*
|
|
* The irq_lock() here is required to prevent concurrent
|
|
* callers to corrupt the pin states.
|
|
*/
|
|
key = irq_lock();
|
|
/* clear the pin */
|
|
cfg->port->dataout &= ~(BIT(pin));
|
|
irq_unlock(key);
|
|
}
|
|
break;
|
|
case GPIO_ACCESS_BY_PORT:
|
|
if (value) {
|
|
/* set all pins */
|
|
cfg->port->dataout = 0xFFFF;
|
|
} else {
|
|
/* clear all pins */
|
|
cfg->port->dataout = 0x0;
|
|
}
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief Read the pin or port status
|
|
*
|
|
* @param dev Device struct
|
|
* @param access_op Access operation (pin or port)
|
|
* @param pin The pin number
|
|
* @param value Value of input pin(s)
|
|
*
|
|
* @return 0 if successful, failed otherwise
|
|
*/
|
|
static int gpio_cmsdk_ahb_read(struct device *dev, int access_op,
|
|
uint32_t pin, uint32_t *value)
|
|
{
|
|
const struct gpio_cmsdk_ahb_cfg * const cfg = dev->config->config_info;
|
|
|
|
*value = cfg->port->data;
|
|
|
|
switch (access_op) {
|
|
case GPIO_ACCESS_BY_PIN:
|
|
*value = (*value >> pin) & 0x1;
|
|
break;
|
|
case GPIO_ACCESS_BY_PORT:
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpio_cmsdk_ahb_isr(void *arg)
|
|
{
|
|
struct device *dev = (struct device *)arg;
|
|
const struct gpio_cmsdk_ahb_cfg * const cfg = dev->config->config_info;
|
|
struct gpio_cmsdk_ahb_dev_data *data = dev->driver_data;
|
|
uint32_t int_stat;
|
|
|
|
int_stat = cfg->port->intstatus;
|
|
|
|
_gpio_fire_callbacks(&data->gpio_cb, dev, int_stat);
|
|
|
|
/* clear the port interrupts */
|
|
cfg->port->intclear = 0xFFFFFFFF;
|
|
}
|
|
|
|
static int gpio_cmsdk_ahb_manage_callback(struct device *dev,
|
|
struct gpio_callback *callback,
|
|
bool set)
|
|
{
|
|
struct gpio_cmsdk_ahb_dev_data *data = dev->driver_data;
|
|
|
|
_gpio_manage_callback(&data->gpio_cb, callback, set);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_cmsdk_ahb_enable_callback(struct device *dev,
|
|
int access_op, uint32_t pin)
|
|
{
|
|
const struct gpio_cmsdk_ahb_cfg * const cfg = dev->config->config_info;
|
|
uint32_t mask;
|
|
|
|
switch (access_op) {
|
|
case GPIO_ACCESS_BY_PIN:
|
|
mask = BIT(pin);
|
|
break;
|
|
case GPIO_ACCESS_BY_PORT:
|
|
mask = 0xFFFF;
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
cfg->port->intenset |= mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_cmsdk_ahb_disable_callback(struct device *dev,
|
|
int access_op, uint32_t pin)
|
|
{
|
|
const struct gpio_cmsdk_ahb_cfg * const cfg = dev->config->config_info;
|
|
uint32_t mask;
|
|
|
|
switch (access_op) {
|
|
case GPIO_ACCESS_BY_PIN:
|
|
mask = BIT(pin);
|
|
break;
|
|
case GPIO_ACCESS_BY_PORT:
|
|
mask = 0xFFFF;
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
cfg->port->intenclr |= mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct gpio_driver_api gpio_cmsdk_ahb_drv_api_funcs = {
|
|
.config = gpio_cmsdk_ahb_config,
|
|
.write = gpio_cmsdk_ahb_write,
|
|
.read = gpio_cmsdk_ahb_read,
|
|
.manage_callback = gpio_cmsdk_ahb_manage_callback,
|
|
.enable_callback = gpio_cmsdk_ahb_enable_callback,
|
|
.disable_callback = gpio_cmsdk_ahb_disable_callback,
|
|
};
|
|
|
|
/**
|
|
* @brief Initialization function of GPIO
|
|
*
|
|
* @param dev Device struct
|
|
* @return 0 if successful, failed otherwise.
|
|
*/
|
|
static int gpio_cmsdk_ahb_init(struct device *dev)
|
|
{
|
|
const struct gpio_cmsdk_ahb_cfg * const cfg = dev->config->config_info;
|
|
|
|
#ifdef CONFIG_CLOCK_CONTROL
|
|
/* Enable clock for subsystem */
|
|
struct device *clk =
|
|
device_get_binding(CONFIG_ARM_CLOCK_CONTROL_DEV_NAME);
|
|
|
|
#ifdef CONFIG_SOC_SERIES_BEETLE
|
|
clock_control_on(clk, (clock_control_subsys_t *) &cfg->gpio_cc_as);
|
|
clock_control_off(clk, (clock_control_subsys_t *) &cfg->gpio_cc_ss);
|
|
clock_control_off(clk, (clock_control_subsys_t *) &cfg->gpio_cc_dss);
|
|
#endif /* CONFIG_SOC_SERIES_BEETLE */
|
|
#endif /* CONFIG_CLOCK_CONTROL */
|
|
|
|
cfg->gpio_config_func(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Port 0 */
|
|
#ifdef CONFIG_GPIO_CMSDK_AHB_PORT0
|
|
static void gpio_cmsdk_ahb_config_0(struct device *dev);
|
|
|
|
static const struct gpio_cmsdk_ahb_cfg gpio_cmsdk_ahb_0_cfg = {
|
|
.port = ((volatile struct gpio_cmsdk_ahb *)CMSDK_AHB_GPIO0),
|
|
.gpio_config_func = gpio_cmsdk_ahb_config_0,
|
|
.gpio_cc_as = {.bus = CMSDK_AHB, .state = SOC_ACTIVE,
|
|
.device = CMSDK_AHB_GPIO0,},
|
|
.gpio_cc_ss = {.bus = CMSDK_AHB, .state = SOC_SLEEP,
|
|
.device = CMSDK_AHB_GPIO0,},
|
|
.gpio_cc_dss = {.bus = CMSDK_AHB, .state = SOC_DEEPSLEEP,
|
|
.device = CMSDK_AHB_GPIO0,},
|
|
};
|
|
|
|
static struct gpio_cmsdk_ahb_dev_data gpio_cmsdk_ahb_0_data;
|
|
|
|
DEVICE_AND_API_INIT(gpio_cmsdk_ahb_0,
|
|
CONFIG_GPIO_CMSDK_AHB_PORT0_DEV_NAME,
|
|
gpio_cmsdk_ahb_init, &gpio_cmsdk_ahb_0_data,
|
|
&gpio_cmsdk_ahb_0_cfg, POST_KERNEL,
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&gpio_cmsdk_ahb_drv_api_funcs);
|
|
|
|
static void gpio_cmsdk_ahb_config_0(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(IRQ_PORT0_ALL, CONFIG_GPIO_CMSDK_AHB_PORT0_IRQ_PRI,
|
|
gpio_cmsdk_ahb_isr,
|
|
DEVICE_GET(gpio_cmsdk_ahb_0), 0);
|
|
irq_enable(IRQ_PORT0_ALL);
|
|
}
|
|
#endif /* CONFIG_GPIO_CMSDK_AHB_PORT0 */
|
|
|
|
/* Port 1 */
|
|
#ifdef CONFIG_GPIO_CMSDK_AHB_PORT1
|
|
static void gpio_cmsdk_ahb_config_1(struct device *dev);
|
|
|
|
static const struct gpio_cmsdk_ahb_cfg gpio_cmsdk_ahb_1_cfg = {
|
|
.port = ((volatile struct gpio_cmsdk_ahb *)CMSDK_AHB_GPIO1),
|
|
.gpio_config_func = gpio_cmsdk_ahb_config_1,
|
|
.gpio_cc_as = {.bus = CMSDK_AHB, .state = SOC_ACTIVE,
|
|
.device = CMSDK_AHB_GPIO1,},
|
|
.gpio_cc_ss = {.bus = CMSDK_AHB, .state = SOC_SLEEP,
|
|
.device = CMSDK_AHB_GPIO1,},
|
|
.gpio_cc_dss = {.bus = CMSDK_AHB, .state = SOC_DEEPSLEEP,
|
|
.device = CMSDK_AHB_GPIO1,},
|
|
};
|
|
|
|
static struct gpio_cmsdk_ahb_dev_data gpio_cmsdk_ahb_1_data;
|
|
|
|
DEVICE_AND_API_INIT(gpio_cmsdk_ahb_1,
|
|
CONFIG_GPIO_CMSDK_AHB_PORT1_DEV_NAME,
|
|
gpio_cmsdk_ahb_init, &gpio_cmsdk_ahb_1_data,
|
|
&gpio_cmsdk_ahb_1_cfg, POST_KERNEL,
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&gpio_cmsdk_ahb_drv_api_funcs);
|
|
|
|
static void gpio_cmsdk_ahb_config_1(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(IRQ_PORT1_ALL, CONFIG_GPIO_CMSDK_AHB_PORT1_IRQ_PRI,
|
|
gpio_cmsdk_ahb_isr,
|
|
DEVICE_GET(gpio_cmsdk_ahb_1), 0);
|
|
irq_enable(IRQ_PORT1_ALL);
|
|
}
|
|
#endif /* CONFIG_GPIO_CMSDK_AHB_PORT1 */
|
|
|
|
/* Port 2 */
|
|
#ifdef CONFIG_GPIO_CMSDK_AHB_PORT2
|
|
static void gpio_cmsdk_ahb_config_2(struct device *dev);
|
|
|
|
static const struct gpio_cmsdk_ahb_cfg gpio_cmsdk_ahb_2_cfg = {
|
|
.port = ((volatile struct gpio_cmsdk_ahb *)CMSDK_AHB_GPIO2),
|
|
.gpio_config_func = gpio_cmsdk_ahb_config_2,
|
|
.gpio_cc_as = {.bus = CMSDK_AHB, .state = SOC_ACTIVE,
|
|
.device = CMSDK_AHB_GPIO2,},
|
|
.gpio_cc_ss = {.bus = CMSDK_AHB, .state = SOC_SLEEP,
|
|
.device = CMSDK_AHB_GPIO2,},
|
|
.gpio_cc_dss = {.bus = CMSDK_AHB, .state = SOC_DEEPSLEEP,
|
|
.device = CMSDK_AHB_GPIO2,},
|
|
};
|
|
|
|
static struct gpio_cmsdk_ahb_dev_data gpio_cmsdk_ahb_2_data;
|
|
|
|
DEVICE_AND_API_INIT(gpio_cmsdk_ahb_2,
|
|
CONFIG_GPIO_CMSDK_AHB_PORT2_DEV_NAME,
|
|
gpio_cmsdk_ahb_init, &gpio_cmsdk_ahb_2_data,
|
|
&gpio_cmsdk_ahb_2_cfg, POST_KERNEL,
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&gpio_cmsdk_ahb_drv_api_funcs);
|
|
|
|
static void gpio_cmsdk_ahb_config_2(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(IRQ_PORT2_ALL, CONFIG_GPIO_CMSDK_AHB_PORT2_IRQ_PRI,
|
|
gpio_cmsdk_ahb_isr,
|
|
DEVICE_GET(gpio_cmsdk_ahb_2), 0);
|
|
irq_enable(IRQ_PORT2_ALL);
|
|
}
|
|
#endif /* CONFIG_GPIO_CMSDK_AHB_PORT2 */
|
|
|
|
/* Port 3 */
|
|
#ifdef CONFIG_GPIO_CMSDK_AHB_PORT3
|
|
static void gpio_cmsdk_ahb_config_3(struct device *dev);
|
|
|
|
static const struct gpio_cmsdk_ahb_cfg gpio_cmsdk_ahb_3_cfg = {
|
|
.port = ((volatile struct gpio_cmsdk_ahb *)CMSDK_AHB_GPIO3),
|
|
.gpio_config_func = gpio_cmsdk_ahb_config_3,
|
|
.gpio_cc_as = {.bus = CMSDK_AHB, .state = SOC_ACTIVE,
|
|
.device = CMSDK_AHB_GPIO3,},
|
|
.gpio_cc_ss = {.bus = CMSDK_AHB, .state = SOC_SLEEP,
|
|
.device = CMSDK_AHB_GPIO3,},
|
|
.gpio_cc_dss = {.bus = CMSDK_AHB, .state = SOC_DEEPSLEEP,
|
|
.device = CMSDK_AHB_GPIO3,},
|
|
};
|
|
|
|
static struct gpio_cmsdk_ahb_dev_data gpio_cmsdk_ahb_3_data;
|
|
|
|
DEVICE_AND_API_INIT(gpio_cmsdk_ahb_3,
|
|
CONFIG_GPIO_CMSDK_AHB_PORT3_DEV_NAME,
|
|
gpio_cmsdk_ahb_init, &gpio_cmsdk_ahb_3_data,
|
|
&gpio_cmsdk_ahb_3_cfg, POST_KERNEL,
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&gpio_cmsdk_ahb_drv_api_funcs);
|
|
|
|
static void gpio_cmsdk_ahb_config_3(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(IRQ_PORT3_ALL, CONFIG_GPIO_CMSDK_AHB_PORT3_IRQ_PRI,
|
|
gpio_cmsdk_ahb_isr,
|
|
DEVICE_GET(gpio_cmsdk_ahb_3), 0);
|
|
irq_enable(IRQ_PORT3_ALL);
|
|
}
|
|
#endif /* CONFIG_GPIO_CMSDK_AHB_PORT3 */
|