55ee53ce91
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the application and test build scripts. Modern versions of CMake will spam users with a deprecation warning when the toplevel CMakeLists.txt does not specify a CMake version. This is documented in bug #8355. To resolve this we include a cmake_minimum_required() line into the toplevel build scripts. Additionally, cmake_minimum_required is invoked from within boilerplate.cmake. The highest version will be enforced. This patch allows us to afterwards change CMake policy CMP000 from OLD to NEW which in turn finally rids us of the verbose warning. The extra boilerplate is considered more acceptable than the verbosity of the CMP0000 policy. Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no> |
||
|---|---|---|
| .. | ||
| src | ||
| CMakeLists.txt | ||
| README | ||
| prj.conf | ||
| sample.yaml | ||
README
Application implementing 802.15.4 "serial-radio" protocol.
How to use:
1. Build and flash Zephyr application to Quark board with 802.15.4 radio,
at the moment CC2520 radio is supported.
2. Connect board to Linux PC, /dev/ttyACM[number] should appear
3. Run Contiki-based native border router (6lbr, native-router, etc)
Example for Contiki:
$ cd examples/ipv6/native-border-router
$ make
$ sudo ./border-router.native -v5 -s ttyACM0 fd01::1/64
Now you have Contiki native border router, simple web server should show some
802.15.4 devices. Web server address is printed in the border-router output
screen:
...
Server IPv6 addresses:
0x62c5c0: =>fd01::212:4b00:531f:113a
...
Go to http://[fd01::212:4b00:531f:113a]/
It shall show you Neighbors and Routes.
PS: Make sure your disto ModemManager is disabled, otherwise it sends AT commands
to our device ;)
$ sudo systemctl disable ModemManager.service