147 lines
4.1 KiB
ArmAsm
147 lines
4.1 KiB
ArmAsm
/*
|
|
* Copyright (c) 2016 Intel Corporation
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <zephyr/toolchain.h>
|
|
#include <zephyr/linker/sections.h>
|
|
|
|
/* exports */
|
|
GTEXT(__start)
|
|
GTEXT(__reset)
|
|
|
|
/* imports */
|
|
GTEXT(z_prep_c)
|
|
GTEXT(z_interrupt_stacks)
|
|
|
|
/* Allow use of r1/at (the assembler temporary register) in this
|
|
* code, normally reserved for internal assembler use
|
|
*/
|
|
.set noat
|
|
|
|
|
|
#if CONFIG_INCLUDE_RESET_VECTOR
|
|
/*
|
|
* Reset vector entry point into the system. Placed into special 'reset'
|
|
* section so that the linker puts this at ALT_CPU_RESET_ADDR defined in
|
|
* system.h
|
|
*
|
|
* This code can be at most 0x20 bytes, since the exception vector for Nios II
|
|
* is usually configured to be 0x20 past the reset vector.
|
|
*/
|
|
SECTION_FUNC(reset, __reset)
|
|
|
|
#if ALT_CPU_ICACHE_SIZE > 0
|
|
/* Aside from the instruction cache line associated with the reset
|
|
* vector, the contents of the cache memories are indeterminate after
|
|
* reset. To ensure cache coherency after reset, the reset handler
|
|
* located at the reset vector must immediately initialize the
|
|
* instruction cache. Next, either the reset handler or a subsequent
|
|
* routine should proceed to initialize the data cache.
|
|
*
|
|
* The cache memory sizes are *always* a power of 2.
|
|
*/
|
|
#if ALT_CPU_ICACHE_SIZE > 0x8000
|
|
movhi r2, %hi(ALT_CPU_ICACHE_SIZE)
|
|
#else
|
|
movui r2, ALT_CPU_ICACHE_SIZE
|
|
#endif
|
|
0:
|
|
/* If ECC present, need to execute initd for each word address
|
|
* to ensure ECC parity bits in data RAM get initialized
|
|
*/
|
|
#ifdef ALT_CPU_ECC_PRESENT
|
|
subi r2, r2, 4
|
|
#else
|
|
subi r2, r2, ALT_CPU_ICACHE_LINE_SIZE
|
|
#endif
|
|
initi r2
|
|
bgt r2, zero, 0b
|
|
#endif /* ALT_CPU_ICACHE_SIZE > 0 */
|
|
|
|
/* Done all we need to do here, jump to __text_start */
|
|
movhi r1, %hi(__start)
|
|
ori r1, r1, %lo(__start)
|
|
jmp r1
|
|
#endif /* CONFIG_INCLUDE_RESET_VECTOR */
|
|
|
|
/* Remainder of asm-land initialization code before we can jump into
|
|
* the C domain
|
|
*/
|
|
SECTION_FUNC(TEXT, __start)
|
|
|
|
/* TODO if shadow register sets enabled, ensure we are in set 0
|
|
* GH-1821
|
|
*/
|
|
|
|
/* Initialize the data cache if booting from bare metal. If
|
|
* we're not booting from our reset vector, either by a bootloader
|
|
* or JTAG, assume caches already initialized.
|
|
*/
|
|
#if ALT_CPU_DCACHE_SIZE > 0 && defined(CONFIG_INCLUDE_RESET_VECTOR)
|
|
/* Per documentation data cache size is always a power of two. */
|
|
#if ALT_CPU_DCACHE_SIZE > 0x8000
|
|
movhi r2, %hi(ALT_CPU_DCACHE_SIZE)
|
|
#else
|
|
movui r2, ALT_CPU_DCACHE_SIZE
|
|
#endif
|
|
0:
|
|
/* If ECC present, need to execute initd for each word address
|
|
* to ensure ECC parity bits in data RAM get initialized
|
|
*/
|
|
#ifdef ALT_CPU_ECC_PRESENT
|
|
subi r2, r2, 4
|
|
#else
|
|
subi r2, r2, ALT_CPU_DCACHE_LINE_SIZE
|
|
#endif
|
|
initd 0(r2)
|
|
bgt r2, zero, 0b
|
|
#endif /* ALT_CPU_DCACHE_SIZE && defined(CONFIG_INCLUDE_RESET_VECTOR) */
|
|
|
|
#ifdef CONFIG_INIT_STACKS
|
|
/* Pre-populate all bytes in z_interrupt_stacks with 0xAA
|
|
* init.c enforces that the z_interrupt_stacks pointer
|
|
* and CONFIG_ISR_STACK_SIZE are a multiple of ARCH_STACK_PTR_ALIGN (4)
|
|
*/
|
|
movhi r1, %hi(z_interrupt_stacks)
|
|
ori r1, r1, %lo(z_interrupt_stacks)
|
|
movhi r2, %hi(CONFIG_ISR_STACK_SIZE)
|
|
ori r2, r2, %lo(CONFIG_ISR_STACK_SIZE)
|
|
/* Put constant 0xaaaaaaaa in r3 */
|
|
movhi r3, 0xaaaa
|
|
ori r3, r3, 0xaaaa
|
|
1:
|
|
/* Loop through the z_interrupt_stacks treating it as an array of
|
|
* uint32_t, setting each element to r3 */
|
|
stw r3, (r1)
|
|
subi r2, r2, 4
|
|
addi r1, r1, 4
|
|
blt r0, r2, 1b
|
|
#endif
|
|
|
|
/* Set up the initial stack pointer to the interrupt stack, safe
|
|
* to use this as the CPU boots up with interrupts disabled and we
|
|
* don't turn them on until much later, when the kernel is on
|
|
* the main stack */
|
|
movhi sp, %hi(z_interrupt_stacks)
|
|
ori sp, sp, %lo(z_interrupt_stacks)
|
|
addi sp, sp, CONFIG_ISR_STACK_SIZE
|
|
|
|
#if defined(CONFIG_GP_LOCAL) || defined(CONFIG_GP_GLOBAL) || \
|
|
defined(CONFIG_GP_ALL_DATA)
|
|
/* Initialize global pointer with the linker variable we set */
|
|
movhi gp, %hi(_gp)
|
|
ori gp, gp, %lo(_gp)
|
|
#endif
|
|
|
|
/* TODO if shadow register sets enabled, interate through them to set
|
|
* up. Need to clear r0, write gp, set the exception stack pointer
|
|
* GH-1821
|
|
*/
|
|
|
|
/* Jump into C domain. z_prep_c zeroes BSS, copies rw data into RAM,
|
|
* and then enters z_cstart */
|
|
call z_prep_c
|
|
|