zephyr

History

Mahavir Jain eefd912fed samples: net: Use unified kernel interface for sem/queue declaration Change-Id: I2519a7a35f83d2542f333ca6791a6f22944a42c4 Signed-off-by: Mahavir Jain <mjain@marvell.com>		2016-12-02 12:41:14 +02:00
..
src	samples: net: Use unified kernel interface for sem/queue declaration	2016-12-02 12:41:14 +02:00
Makefile	wpan_serial: Implement 802.15.4 serial radio protocol	2016-12-02 12:40:52 +02:00
README	wpan_serial: Update README	2016-12-02 12:41:03 +02:00
prj.conf	wpan_serial: Minimize debug output by default and set proper nbuf size	2016-12-02 12:41:13 +02:00
testcase.ini	wpan_serial: Implement 802.15.4 serial radio protocol	2016-12-02 12:40:52 +02:00

README

Application implementing 802.15.4 "serial-radio" protocol.

How to use:

1. Build and flash Zephyr application to Quark board with 802.15.4 radio,
   at the moment CC2520 radio is supported.
2. Connect board to Linux PC, /dev/ttyACM[number] should appear
3. Run Contiki-based native border router (6lbr, native-router, etc)
     Example for Contiki:
     $ cd examples/ipv6/native-border-router
     $ make
     $ sudo ./border-router.native -v5 -s ttyACM0 fd01::1/64

Now you have Contiki native border router, simple web server should show some
802.15.4 devices. Web server address is printed in the border-router output
screen:
...
Server IPv6 addresses:
 0x62c5c0: =>fd01::212:4b00:531f:113a
...
Go to http://[fd01::212:4b00:531f:113a]/

It shall show you Neighbors and Routes.

PS: Make sure your disto ModemManager is disabled, otherwise it sends AT commands
to our device ;)

$ sudo systemctl disable ModemManager.service