zephyr

History

Francois Ramu 3cf2654141 samples: drivers: led pwm running on 2 pwm leds on nucleo_u575 Add the overlay file to run the samples/drivers/led_pwm on the nucelo_u575zi_q board. Two green leds are used on pc7 and pb7 corresponding to pwm channels of timers3 and timers4. The leds node has to be disabled to let the pin for the pwm nodes. Signed-off-by: Francois Ramu <francois.ramu@st.com>		2023-02-20 09:47:18 +01:00
..
boards	samples: drivers: led pwm running on 2 pwm leds on nucleo_u575	2023-02-20 09:47:18 +01:00
src	includes: prefer <zephyr/kernel.h> over <zephyr/zephyr.h>	2022-09-05 16:31:47 +02:00
CMakeLists.txt	…
README.rst	…
prj.conf	samples: drivers: led_pwm: enable immediate logging mode	2023-01-02 13:03:46 +01:00
sample.yaml	…

README.rst

.. _led_pwm:

LED PWM sample application
##########################

Overview
********

This sample allows to test the led-pwm driver. The first "pwm-leds" compatible
device instance found in DT is used. For each LEDs attached to this device
(child nodes) the same test pattern (described below) is executed. The LED API
functions are used to control the LEDs.

Test pattern
============

For each PWM LEDs (one after the other):

- Turning on
- Turning off
- Increasing brightness gradually
- Blinking on: 0.1 sec, off: 0.1 sec
- Blinking on: 1 sec, off: 1 sec
- Turning off

Building and Running
********************

This sample can be built and executed on all the boards with PWM LEDs connected.
The LEDs must be correctly described in the DTS: the compatible property of the
device node must match "pwm-leds". And for each LED, a child node must be
defined and the PWM configuration must be provided through a "pwms" phandle's
node.