zephyr

History

Reto Schneider 7eabab2f5d samples, tests: Use semi-accurate project names When using an IDE (e.g. Eclipse, Qt Creator), the project name gets displayed. This greatly simplifies the navigation between projects when having many of them open at the same time. Naming every project "NONE" defeats this functionality. This patch tries to use sensible project names while not duplicating too much of what is already represented in the path. This is done by using the name of the directory the relevant CMakeLists.txt file is stored in. To ensure unique project names in the samples (and again, in the tests folder) folder, small manual adjustments have been done. Signed-off-by: Reto Schneider <code@reto-schneider.ch>		2018-10-27 21:31:25 -04:00
..
src	…
CMakeLists.txt	samples, tests: Use semi-accurate project names	2018-10-27 21:31:25 -04:00
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. _hts221:

HTS221: Temperature and Humidity Monitor
########################################

Overview
********
This sample periodically reads temperature and humidity from the HTS221
Temperature & Humidity Sensor and displays it on the console


Requirements
************

This sample uses the HTS221 sensor controlled using the I2C interface.

References
**********

 - HTS211: http://www.st.com/en/mems-and-sensors/hts221.html

Building and Running
********************

 This project outputs sensor data to the console. It requires an HTS221
 sensor, which is present on the disco_l475_iot1 board.

.. zephyr-app-commands::
   :zephyr-app: samples/sensors/hts221
   :board: disco_l475_iot1
   :goals: build
   :compact:

Sample Output
=============

 .. code-block:: console

    Temperature:25.3 C
    Relative Humidity:40%
    Temperature:25.3 C
    Relative Humidity:40%
    Temperature:25.3 C
    Relative Humidity:40%
    Temperature:25.3 C
    Relative Humidity:40%

    <repeats endlessly every 2 seconds>