116 lines
2.3 KiB
ReStructuredText
116 lines
2.3 KiB
ReStructuredText
.. _zperf-sample:
|
|
|
|
zperf: Network Traffic Generator
|
|
################################
|
|
|
|
Description
|
|
***********
|
|
|
|
zperf is a network traffic generator for Zephyr that may be used to
|
|
evaluate network bandwidth.
|
|
|
|
Features
|
|
*********
|
|
|
|
- Compatible with iPerf_2.0.5.
|
|
- Client or server mode allowed without need to modify the source code.
|
|
|
|
Supported Boards
|
|
****************
|
|
|
|
zperf is board-agnostic. However, to run the zperf sample application,
|
|
the target platform must provide a network interface supported by Zephyr.
|
|
|
|
This sample application has been tested on the following platforms:
|
|
|
|
- Freedom Board (FRDM K64F)
|
|
- Quark SE C1000 Development Board
|
|
- QEMU x86
|
|
|
|
Requirements
|
|
************
|
|
|
|
- iPerf 2.0.5 installed on the host machine
|
|
- Supported board
|
|
|
|
Depending on the network technology chosen, extra steps may be required
|
|
to setup the network environment.
|
|
|
|
Usage
|
|
*****
|
|
|
|
If Zephyr acts as a client, iPerf must be executed in server mode.
|
|
For example, the following command line must be used for UDP testing:
|
|
|
|
.. code-block:: console
|
|
|
|
$ iperf -s -l 1K -u -V -B 2001:db8::2
|
|
|
|
For TCP testing, the command line would look like this:
|
|
|
|
.. code-block:: console
|
|
|
|
$ iperf -s -l 1K -V -B 2001:db8::2
|
|
|
|
|
|
In the Zephyr console, zperf can be executed as follows:
|
|
|
|
.. code-block:: console
|
|
|
|
zperf> udp upload 2001:db8::2 5001 10 1K 1M
|
|
|
|
|
|
For TCP the zperf command would look like this:
|
|
|
|
.. code-block:: console
|
|
|
|
zperf> tcp upload 2001:db8::2 5001 10 1K 1M
|
|
|
|
|
|
If the IP addresses of Zephyr and the host machine are specified in the
|
|
config file, zperf can be started as follows:
|
|
|
|
.. code-block:: console
|
|
|
|
zperf> udp upload2 v6 10 1K 1M
|
|
|
|
|
|
or like this if you want to test TCP:
|
|
|
|
.. code-block:: console
|
|
|
|
zperf> tcp upload2 v6 10 1K 1M
|
|
|
|
|
|
If Zephyr is acting as a server, set the download mode as follows for UDP:
|
|
|
|
.. code-block:: console
|
|
|
|
zperf> udp download 5001
|
|
|
|
|
|
or like this for TCP:
|
|
|
|
.. code-block:: console
|
|
|
|
zperf> tcp download 5001
|
|
|
|
|
|
and in the host side, iPerf must be executed with the following
|
|
command line if you are testing UDP:
|
|
|
|
.. code-block:: console
|
|
|
|
$ iperf -l 1K -u -V -c 2001:db8::1 -p 5001
|
|
|
|
|
|
and this if you are testing TCP:
|
|
|
|
.. code-block:: console
|
|
|
|
$ iperf -l 1K -V -c 2001:db8::1 -p 5001
|
|
|
|
|
|
iPerf output can be limited by using the -b option if Zephyr is not
|
|
able to receive all the packets in orderly manner.
|