Kumar Gala f13be5ebe3 boards: mimxrt1050_evk: Split QSPI flash config as a seperate board ... To enable the QSPI you have to physically modify the board and this disables the hyperflash. Since we plan on removing Kconfig from device trees, its easier to treat the QSPI flash as a seperate board config and thus it will get a dts to match. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>		2018-12-11 09:23:21 -06:00
..
doc	boards: Fix and update nxp board doc links	2018-12-07 16:41:29 -05:00
CMakeLists.txt	cmake: replace PROJECT_SOURCE_DIR with ZEPHYR_BASE	2018-06-18 15:25:55 -04:00
Kconfig	boards: mimxrt1050_evk: Split QSPI flash config as a seperate board	2018-12-11 09:23:21 -06:00
Kconfig.board	boards: mimxrt1050_evk: Split QSPI flash config as a seperate board	2018-12-11 09:23:21 -06:00
Kconfig.defconfig	boards: mimxrt1050_evk: Split QSPI flash config as a seperate board	2018-12-11 09:23:21 -06:00
board.cmake	boards: mimxrt1050_evk: Enable pyocd runner	2018-11-21 05:10:04 -06:00
mimxrt1050_evk.dts	boards: mimxrt1050_evk: Split QSPI flash config as a seperate board	2018-12-11 09:23:21 -06:00
mimxrt1050_evk.yaml	mimxrt1050_evk: enabling networking hardware	2018-11-20 09:54:25 -06:00
mimxrt1050_evk_defconfig	arch: nxp_imx: Remove ARM_MPU_IMX_RT option.	2018-09-20 14:16:50 +02:00
mimxrt1050_evk_qspi.dts	boards: mimxrt1050_evk: Split QSPI flash config as a seperate board	2018-12-11 09:23:21 -06:00
mimxrt1050_evk_qspi.yaml	boards: mimxrt1050_evk: Split QSPI flash config as a seperate board	2018-12-11 09:23:21 -06:00
mimxrt1050_evk_qspi_defconfig	boards: mimxrt1050_evk: Split QSPI flash config as a seperate board	2018-12-11 09:23:21 -06:00
pinmux.c	mimxrt1050_evk: enabling networking hardware	2018-11-20 09:54:25 -06:00