169 lines
3.7 KiB
C
169 lines
3.7 KiB
C
/*
|
|
* Copyright (c) 2016 Linaro Limited
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <device.h>
|
|
#include <init.h>
|
|
#include <kernel.h>
|
|
#include <pinmux.h>
|
|
#include <soc.h>
|
|
#include <sys_io.h>
|
|
#include <gpio/gpio_cmsdk_ahb.h>
|
|
|
|
#include "pinmux/pinmux.h"
|
|
|
|
/**
|
|
* @brief Pinmux driver for ARM MPS2 AN385 Board
|
|
*
|
|
* The ARM MPS2 AN385 Board has 4 GPIO controllers. These controllers
|
|
* are responsible for pin muxing, input/output, pull-up, etc.
|
|
*
|
|
* All GPIO controller pins are exposed via the following sequence of pin
|
|
* numbers:
|
|
* Pins 0 - 15 are for GPIO0
|
|
* Pins 16 - 31 are for GPIO1
|
|
* Pins 32 - 47 are for GPIO2
|
|
* Pins 48 - 51 are for GPIO3
|
|
*
|
|
* For the GPIO controllers configuration ARM MPS2 AN385 Board follows the
|
|
* Arduino compliant pin out.
|
|
*/
|
|
|
|
#define CMSDK_AHB_GPIO0_DEV \
|
|
((volatile struct gpio_cmsdk_ahb *)CMSDK_AHB_GPIO0)
|
|
#define CMSDK_AHB_GPIO1_DEV \
|
|
((volatile struct gpio_cmsdk_ahb *)CMSDK_AHB_GPIO1)
|
|
#define CMSDK_AHB_GPIO2_DEV \
|
|
((volatile struct gpio_cmsdk_ahb *)CMSDK_AHB_GPIO2)
|
|
#define CMSDK_AHB_GPIO3_DEV \
|
|
((volatile struct gpio_cmsdk_ahb *)CMSDK_AHB_GPIO3)
|
|
|
|
/*
|
|
* This is the mapping from the ARM MPS2 AN385 Board pins to GPIO
|
|
* controllers.
|
|
*
|
|
* D0 : EXT_0
|
|
* D1 : EXT_4
|
|
* D2 : EXT_2
|
|
* D3 : EXT_3
|
|
* D4 : EXT_1
|
|
* D5 : EXT_6
|
|
* D6 : EXT_7
|
|
* D7 : EXT_8
|
|
* D8 : EXT_9
|
|
* D9 : EXT_10
|
|
* D10 : EXT_12
|
|
* D11 : EXT_13
|
|
* D12 : EXT_14
|
|
* D13 : EXT_11
|
|
* D14 : EXT_15
|
|
* D15 : EXT_5
|
|
* D16 : EXT_16
|
|
* D17 : EXT_17
|
|
* D18 : EXT_18
|
|
* D19 : EXT_19
|
|
* D20 : EXT_20
|
|
* D21 : EXT_21
|
|
* D22 : EXT_22
|
|
* D23 : EXT_23
|
|
* D24 : EXT_24
|
|
* D25 : EXT_25
|
|
* D26 : EXT_26
|
|
* D27 : EXT_30
|
|
* D28 : EXT_28
|
|
* D29 : EXT_29
|
|
* D30 : EXT_27
|
|
* D31 : EXT_32
|
|
* D32 : EXT_33
|
|
* D33 : EXT_34
|
|
* D34 : EXT_35
|
|
* D35 : EXT_36
|
|
* D36 : EXT_38
|
|
* D37 : EXT_39
|
|
* D38 : EXT_40
|
|
* D39 : EXT_44
|
|
* D40 : EXT_41
|
|
* D41 : EXT_31
|
|
* D42 : EXT_37
|
|
* D43 : EXT_42
|
|
* D44 : EXT_43
|
|
* D45 : EXT_45
|
|
* D46 : EXT_46
|
|
* D47 : EXT_47
|
|
* D48 : EXT_48
|
|
* D49 : EXT_49
|
|
* D50 : EXT_50
|
|
* D51 : EXT_51
|
|
*
|
|
* UART_3_RX : D0
|
|
* UART_3_TX : D1
|
|
* SPI_3_CS : D10
|
|
* SPI_3_MOSI : D11
|
|
* SPI_3_MISO : D12
|
|
* SPI_3_SCLK : D13
|
|
* I2C_3_SDA : D14
|
|
* I2C_3_SCL : D15
|
|
* UART_4_RX : D26
|
|
* UART_4_TX : D30
|
|
* SPI_4_CS : D36
|
|
* SPI_4_MOSI : D37
|
|
* SPI_4_MISO : D38
|
|
* SPI_4_SCK : D39
|
|
* I2C_4_SDA : D40
|
|
* I2C_4_SCL : D41
|
|
*
|
|
*/
|
|
static void arm_mps2_pinmux_defaults(void)
|
|
{
|
|
u32_t gpio_0 = 0;
|
|
u32_t gpio_1 = 0;
|
|
u32_t gpio_2 = 0;
|
|
|
|
/* Set GPIO Alternate Functions */
|
|
|
|
gpio_0 = (1<<0) /* Shield 0 UART 3 RXD */
|
|
| (1<<4) /* Shield 0 UART 3 TXD */
|
|
| (1<<5) /* Shield 0 I2C 3 SDL SBCON2 */
|
|
| (1<<15) /* Shield 0 I2C 3 SDA SBCON2 */
|
|
| (1<<11) /* Shield 0 SPI 3 nCS */
|
|
| (1<<12) /* Shield 0 SPI 3 MOSI */
|
|
| (1<<13) /* Shield 0 SPI 3 MISO */
|
|
| (1<<14); /* Shield 0 SPI 3 SCK */
|
|
|
|
CMSDK_AHB_GPIO0_DEV->altfuncset = gpio_0;
|
|
|
|
gpio_1 = (1<<10) /* Shield 1 UART 4 RXD */
|
|
| (1<<14) /* Shield 1 UART 4 TXD */
|
|
| (1<<15) /* Shield 1 I2C 4 SCL */
|
|
| (1<<0) /* ADC SPI_1 nCS */
|
|
| (1<<1) /* ADC SPI_1 MOSI */
|
|
| (1<<2) /* ADC SPI_1 MISO */
|
|
| (1<<3) /* ADC SPI_1 SCK */
|
|
| (1<<5) /* USER BUTTON 0 */
|
|
| (1<<6); /* USER BUTTON 1 */
|
|
|
|
CMSDK_AHB_GPIO1_DEV->altfuncset = gpio_1;
|
|
|
|
gpio_2 = (1<<9) /* Shield 1 I2C 4 SDA */
|
|
| (1<<6) /* Shield 1 I2C 4 SDA */
|
|
| (1<<7) /* Shield 1 I2C 4 SDA */
|
|
| (1<<8) /* Shield 1 I2C 4 SDA */
|
|
| (1<<12); /* Shield 1 I2C 4 SDA */
|
|
|
|
CMSDK_AHB_GPIO2_DEV->altfuncset = gpio_2;
|
|
}
|
|
|
|
static int arm_mps2_pinmux_init(struct device *port)
|
|
{
|
|
ARG_UNUSED(port);
|
|
|
|
arm_mps2_pinmux_defaults();
|
|
|
|
return 0;
|
|
}
|
|
|
|
SYS_INIT(arm_mps2_pinmux_init, PRE_KERNEL_1,
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT);
|