140 lines
5.4 KiB
ReStructuredText
140 lines
5.4 KiB
ReStructuredText
.. _legend:
|
|
|
|
Legend
|
|
######
|
|
|
|
Overview
|
|
********
|
|
The Legend board family contains three revisions: 25hdd, 25ssd, and 35.
|
|
|
|
The Legend 2.5" HDD board (revision 25hdd) can be found in the Seagate FireCuda
|
|
Gaming Hard Drive, Gaming Drive for Xbox and Gaming Drive for PlayStation
|
|
devices. A 2.5" drive and two chips are embedded: an ASMedia ASM1153 USB-to-SATA
|
|
bridge controller and a STM32F070 MCU. The former is handling the USB to HDD I/Os
|
|
while the latter is dedicated to the LED effects. The two chips are connected
|
|
together through I2C.
|
|
|
|
The Legend 2.5" SSD board (revision 25ssd) is found in the Seagate SSD Gaming
|
|
Drive for Xbox. A Realtek RTS5411S USB hub is embedded and connected to a Phison
|
|
U17 2.5" SSD, as well as a STM32F070 MCU.
|
|
|
|
The Legend 3.5" board (revision 35) can be found in the Seagate FireCuda Gaming
|
|
Hub and Gaming Drive Hub for Xbox devices. A Genesys Logic GL3523-S USB hub is
|
|
connected to an ASMedia ASM1153 USB-to-SATA bridge controller and a STM32F070
|
|
MCU. The two chips are connected together using I2C.
|
|
|
|
On all boards, the Zephyr port is running on the STM32F070 MCU.
|
|
|
|
.. image:: img/firecuda_gaming_hard_drive.jpg
|
|
:align: center
|
|
:alt: Seagate FireCuda Gaming Hard Drive
|
|
|
|
.. image:: img/firecuda_gaming_hub.jpg
|
|
:align: center
|
|
:alt: Seagate FireCuda Gaming Hub
|
|
|
|
Hardware
|
|
********
|
|
|
|
- STM32F070cb MCU:
|
|
|
|
- ARM Cortex-M0+
|
|
- 16KB SRAM
|
|
- 128KB on-chip flash
|
|
|
|
- External devices connected to the STM32F070cb MCU:
|
|
|
|
- ASMedia ASM1153 USB-to-SATA bridge (I2C master on port 1) (HDD only)
|
|
- 6 (hdd) or 4 (ssd) Everlight B1414 LEDs connected on SPI1 MOSI
|
|
- 1 white LED (HDD only)
|
|
- 64KB external SPI flash connected on SPI2
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
All the hardware features available on the Legend boards are supported by
|
|
Zephyr.
|
|
|
|
+-----------+------------+-------------------------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+=====================================+
|
|
| NVIC | on-chip | nested vector interrupt controller |
|
|
+-----------+------------+-------------------------------------+
|
|
| SYSTICK | on-chip | systick |
|
|
+-----------+------------+-------------------------------------+
|
|
| CLOCK | on-chip | clock and reset control |
|
|
+-----------+------------+-------------------------------------+
|
|
| GPIO | on-chip | gpio |
|
|
+-----------+------------+-------------------------------------+
|
|
| I2C | on-chip | i2c master/slave controller |
|
|
+-----------+------------+-------------------------------------+
|
|
| UART | on-chip | serial |
|
|
+-----------+------------+-------------------------------------+
|
|
| SPI flash | on-chip | spi_nor |
|
|
+-----------+------------+-------------------------------------+
|
|
| LED strip | on-chip | ws2812 |
|
|
+-----------+------------+-------------------------------------+
|
|
| USB | on-chip | usb |
|
|
+-----------+------------+-------------------------------------+
|
|
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
+---------+-----------------+----------------------------+
|
|
| Name | Function | Usage |
|
|
+=========+=================+============================+
|
|
| PB6 | I2C1 | I2C1 SCL (HDD only) |
|
|
+---------+-----------------+----------------------------+
|
|
| PB7 | I2C1 | I2C1 SDA (HDD only) |
|
|
+---------+-----------------+----------------------------+
|
|
| PA10 | UART | USART0 RX |
|
|
+---------+-----------------+----------------------------+
|
|
| PA9 | UART | USART0 TX |
|
|
+---------+-----------------+----------------------------+
|
|
| PB0 | PWM | Activity LED (HDD only) |
|
|
+---------+-----------------+----------------------------+
|
|
| PB12 | SPI2 | SPI2 Enable |
|
|
+---------+-----------------+----------------------------+
|
|
| PB13 | SPI2 | SPI2 Clock |
|
|
+---------+-----------------+----------------------------+
|
|
| PB14 | SPI2 | SPI2 MISO |
|
|
+---------+-----------------+----------------------------+
|
|
| PB15 | SPI2 | SPI2 MOSI |
|
|
+---------+-----------------+----------------------------+
|
|
| PA7 | LED strip | SPI1 MOSI |
|
|
+---------+-----------------+----------------------------+
|
|
| PA12 | USB | USB DM (25ssd and 35 only) |
|
|
+---------+-----------------+----------------------------+
|
|
| PA13 | USB | USB DP (25ssd and 35 only) |
|
|
+---------+-----------------+----------------------------+
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
Flashing
|
|
========
|
|
|
|
The STM32F070cb MCU can be flashed by connecting an external debug probe to the
|
|
SWD port (on-board 4-pin header). In the default OpenOCD configuration, the
|
|
ST Link interface is selected. You may need to replace it with the interface of
|
|
your debug probe.
|
|
|
|
Once the debug probe is connected to both the Legend board and your host
|
|
computer, then you can simply run the ``west flash`` command to write a firmware
|
|
image into flash.
|
|
|
|
Debugging
|
|
=========
|
|
|
|
Please refer to the `Flashing`_ section and run the ``west debug`` command
|
|
instead of ``west flash``.
|
|
|
|
References
|
|
**********
|
|
|
|
- `STM32F070 reference manual`_
|
|
|
|
.. _STM32F070 reference manual:
|
|
http://www.st.com/resource/en/reference_manual/dm00031936.pdf
|