zephyr/samples/net/wpanusb
Anas Nashif b5b8095749 samples: bluetooth and net samples need test setup
remove build_only and make them depend on test harness (bluetooth)

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-12-28 20:24:29 -05:00
..
src net/ieee802154: Make RAW mode generic 2017-11-22 10:10:09 -05:00
CMakeLists.txt Introduce cmake-based rewrite of KBuild 2017-11-08 20:00:22 -05:00
README wpanusb: Export ieee802.14.5 over USB 2016-12-02 12:40:46 +02:00
prj.conf net/ieee802154: Make RAW mode generic 2017-11-22 10:10:09 -05:00
sample.yaml samples: bluetooth and net samples need test setup 2017-12-28 20:24:29 -05:00
wpan-radio-spec.txt wpanusb: Update wpan protocol document 2016-12-02 12:41:05 +02:00

README

This application exports ieee802154 radio over USB to be used in other
Operation Systems like Linux. In this scenario Linux SoftMAC driver would
be used implementing ieee802154 stack inside Linux.

When connected to Linux it is recognized by Linux with wpanusb kernel
driver as:

...
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=8086 ProdID=ff03 Rev=01.00
C:  #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=wpanusb
...

bring it up with:

#!/bin/sh

PHY=`iwpan phy | grep wpan_phy | cut -d' ' -f2`

echo 'Using phy' $PHY

iwpan dev wpan0 set pan_id 0xabcd
iwpan dev wpan0 set short_addr 0xbeef
iwpan phy $PHY set channel 0 26
ip link add link wpan0 name lowpan0 type lowpan
ip link set wpan0 up
ip link set lowpan0 up