206 lines
7.4 KiB
ReStructuredText
206 lines
7.4 KiB
ReStructuredText
.. _lpcxpresso55s06:
|
|
|
|
NXP LPCXpresso55S06
|
|
###################
|
|
|
|
Overview
|
|
********
|
|
|
|
The LPCXpresso55S06 board provides the ideal platform for evaluation
|
|
of the LPC55S0x/LPC550x MCU family, based on the Arm® Cortex®-M33
|
|
architecture. Arduino® UNO compatible shield connectors are included,
|
|
with additional expansion ports around the Arduino footprint, along
|
|
with a PMod/host interface port and MikroElektronika Click module
|
|
site.
|
|
|
|
.. image:: lpcxpress55s06.jpg
|
|
:align: center
|
|
:alt: LPCXpresso55S06
|
|
|
|
Hardware
|
|
********
|
|
|
|
- LPC55S06 Arm® Cortex®-M33 microcontroller running at up to 96 MHz
|
|
- 256 KB flash and 96 KB SRAM on-chip
|
|
- LPC-Link2 debug high speed USB probe with VCOM port
|
|
- MikroElektronika Click expansion option
|
|
- LPCXpresso expansion connectors compatible with Arduino UNO
|
|
- PMod compatible expansion / host connector
|
|
- Reset, ISP, wake, and user buttons for easy testing of software functionality
|
|
- Tri-color LED
|
|
- UART header for external serial to USB cable
|
|
- CAN Transceiver
|
|
- NXP FXOS8700CQ accelerometer
|
|
|
|
For more information about the LPC55S06 SoC and LPCXPresso55S06 board, see:
|
|
|
|
- `LPC55S06 SoC Website`_
|
|
- `LPC55S06 User Manual`_
|
|
- `LPCXpresso55S06 Website`_
|
|
- `LPCXpresso55S06 User Manual`_
|
|
- `LPCXpresso55S06 Development Board Design Files`_
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The lpcxpresso55s06 board configuration supports the hardware features listed
|
|
below. For additional features not yet supported, please also refer to the
|
|
:ref:`lpcxpresso55s69` , which is the superset board in NXP's LPC55xx series.
|
|
NXP prioritizes enabling the superset board with NXP's Full Platform Support for
|
|
Zephyr. Therefore, the lpcxpresso55s69 board may have additional features
|
|
already supported, which can also be re-used on this lpcxpresso55s06 board:
|
|
|
|
+-----------+------------+-------------------------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+=====================================+
|
|
| NVIC | on-chip | nested vector interrupt controller |
|
|
+-----------+------------+-------------------------------------+
|
|
| SYSTICK | on-chip | systick |
|
|
+-----------+------------+-------------------------------------+
|
|
| IOCON | on-chip | pinmux |
|
|
+-----------+------------+-------------------------------------+
|
|
| GPIO | on-chip | gpio |
|
|
+-----------+------------+-------------------------------------+
|
|
| USART | on-chip | serial port-polling; |
|
|
| | | serial port-interrupt |
|
|
+-----------+------------+-------------------------------------+
|
|
| CLOCK | on-chip | clock_control |
|
|
+-----------+------------+-------------------------------------+
|
|
| RNG | on-chip | entropy; |
|
|
| | | random |
|
|
+-----------+------------+-------------------------------------+
|
|
| IAP | on-chip | flash programming |
|
|
+-----------+------------+-------------------------------------+
|
|
|
|
Other hardware features are not currently enabled.
|
|
|
|
Currently available targets for this board are:
|
|
|
|
- *lpcxpresso55s06*
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
The LPC55S06 SoC has IOCON registers, which can be used to configure
|
|
the functionality of a pin.
|
|
|
|
+---------+-----------------+----------------------------+
|
|
| Name | Function | Usage |
|
|
+=========+=================+============================+
|
|
| PIO0_5 | GPIO | ISP SW4 |
|
|
+---------+-----------------+----------------------------+
|
|
| PIO0_29 | USART | USART RX |
|
|
+---------+-----------------+----------------------------+
|
|
| PIO0_30 | USART | USART TX |
|
|
+---------+-----------------+----------------------------+
|
|
| PIO1_4 | GPIO | RED LED |
|
|
+---------+-----------------+----------------------------+
|
|
| PIO1_6 | GPIO | BLUE_LED |
|
|
+---------+-----------------+----------------------------+
|
|
| PIO1_7 | GPIO | GREEN LED |
|
|
+---------+-----------------+----------------------------+
|
|
| PIO1_9 | GPIO | USR SW3 |
|
|
+---------+-----------------+----------------------------+
|
|
| PIO1_18 | GPIO | Wakeup SW1 |
|
|
+---------+-----------------+----------------------------+
|
|
|
|
System Clock
|
|
============
|
|
|
|
The LPC55S06 SoC is configured to use the internal FRO at 96MHz as a
|
|
source for the system clock. Other sources for the system clock are
|
|
provided in the SOC, depending on your system requirements.
|
|
|
|
Serial Port
|
|
===========
|
|
|
|
The LPC55S06 SoC has 8 FLEXCOMM interfaces for serial
|
|
communication. One is configured as USART for the console
|
|
and the remaining are not used.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
Build and flash applications as usual (see :ref:`build_an_application`
|
|
and :ref:`application_run` for more details).
|
|
|
|
Configuring a Debug Probe
|
|
=========================
|
|
|
|
A debug probe is used for both flashing and debugging the board. This
|
|
board is configured by default to use the LPC-Link2 CMSIS-DAP Onboard
|
|
Debug Probe, however the :ref:`pyocd-debug-host-tools` does not yet
|
|
support the LPC55S06 so you must reconfigure the board for one of the
|
|
J-Link debug probe instead.
|
|
|
|
First install the :ref:`jlink-debug-host-tools` and make sure they are
|
|
in your search path.
|
|
|
|
Then follow the instructions in
|
|
:ref:`lpclink2-jlink-onboard-debug-probe` to program the J-Link
|
|
firmware. Please make sure you have the latest firmware for this
|
|
board.
|
|
|
|
Configuring a Console
|
|
=====================
|
|
|
|
Connect a USB cable from your PC to J1 (LINK2), and use the serial
|
|
terminal of your choice (minicom, putty, etc.) with the following
|
|
settings:
|
|
|
|
- Speed: 115200
|
|
- Data: 8 bits
|
|
- Parity: None
|
|
- Stop bits: 1
|
|
|
|
Flashing
|
|
========
|
|
|
|
Here is an example for the :zephyr:code-sample:`hello_world` application.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: lpcxpresso55s06
|
|
:goals: flash
|
|
|
|
Open a serial terminal, reset the board (press the RESET button), and you should
|
|
see the following message in the terminal:
|
|
|
|
.. code-block:: console
|
|
|
|
***** Booting Zephyr OS v3.0.0 *****
|
|
Hello World! lpcxpresso55s06
|
|
|
|
Debugging
|
|
=========
|
|
|
|
Here is an example for the :zephyr:code-sample:`hello_world` application.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: lpcxpresso55s06
|
|
:goals: debug
|
|
|
|
Open a serial terminal, step through the application in your debugger, and you
|
|
should see the following message in the terminal:
|
|
|
|
.. code-block:: console
|
|
|
|
***** Booting Zephyr OS zephyr-v3.0.0 *****
|
|
Hello World! lpcxpresso55s06
|
|
|
|
.. _LPC55S06 SoC Website:
|
|
https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpc550x-s0x-baseline-arm-cortex-m33-based-microcontroller-family:LPC550x
|
|
|
|
.. _LPC55S06 User Manual:
|
|
https://www.nxp.com/docs/en/user-guide/UM11424.pdf
|
|
|
|
.. _LPCxpresso55S06 Website:
|
|
https://www.nxp.com/design/development-boards/lpcxpresso-boards/lpcxpresso-development-board-for-lpc55s0x-0x-family-of-mcus:LPC55S06-EVK
|
|
|
|
.. _LPCXpresso55S06 User Manual:
|
|
https://www.nxp.com/docs/en/user-guide/LPCXpresso55S06UM.pdf
|
|
|
|
.. _LPCXpresso55S06 Development Board Design Files:
|
|
https://www.nxp.com/downloads/en/design-support/LPCXPRESSSO55S06-DESIGN-FILES.zip
|