zephyr/boards/beagle/beagleplay/beagleplay_cc1352p7.dts

96 lines
1.8 KiB
Plaintext

/*
* Copyright (c) 2022 Jason Kridner, BeagleBoard.org Foundation
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <ti/cc1352r7.dtsi>
#include "beagleplay-cc1352p7-pinctrl.dtsi"
/ {
model = "beagleplay";
compatible = "beagle,beagleplay-cc1352p7";
aliases {
led0 = &led0;
led1 = &led1;
};
chosen {
zephyr,sram = &sram0;
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,flash = &flash0;
zephyr,ieee802154 = &ieee802154g;
};
leds: leds {
compatible = "gpio-leds";
led0: led_0 {
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
label = "LED1";
};
led1: led_1 {
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
label = "LED2";
};
};
/**
* The BeaglePlay cc1352 has an on-board antenna switch (SKY13317-373LF) used to
* select the appropriate RF signal port based on the currently-used PHY.
*
* Truth table:
*
* Path DIO29 DIO30
* =========== ===== =====
* Off 0 0
* Sub-1 GHz 0 1 // DIO30 mux to IOC_PORT_RFC_GPO0 for auto
* 20 dBm TX 1 0 // DIO29 mux to IOC_PORT_RFC_GPO3 for auto
*/
antenna_mux0: antenna_mux0 {
compatible = "skyworks,sky13317";
status = "okay";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>, <&gpio0 30 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&board_ant_tx_pa_off &board_ant_subg_off>;
pinctrl-1 = <&board_ant_tx_pa_off &board_ant_subg_on>;
pinctrl-2 = <&board_ant_tx_pa_on &board_ant_subg_on>;
pinctrl-names = "default", "ant_subg", "ant_subg_pa";
};
};
&cpu0 {
clock-frequency = <48000000>;
cpu-power-states = <&idle &standby>;
};
&trng {
status = "okay";
};
&gpio0 {
status = "okay";
};
&uart0 {
status = "okay";
current-speed = <115200>;
pinctrl-0 = <&uart0_rx_default &uart0_tx_default>;
pinctrl-names = "default";
};
&rtc {
status = "okay";
};
&ieee802154 {
status = "okay";
};
&ieee802154g {
status = "okay";
};