537 lines
14 KiB
C
537 lines
14 KiB
C
/*
|
|
* Copyright (c) 2017, NXP
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <errno.h>
|
|
#include <device.h>
|
|
#include <uart.h>
|
|
#include <clock_control.h>
|
|
#include <fsl_uart.h>
|
|
#include <soc.h>
|
|
|
|
struct uart_mcux_config {
|
|
UART_Type *base;
|
|
char *clock_name;
|
|
clock_control_subsys_t clock_subsys;
|
|
u32_t baud_rate;
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
void (*irq_config_func)(struct device *dev);
|
|
#endif
|
|
};
|
|
|
|
struct uart_mcux_data {
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
uart_irq_callback_t callback;
|
|
#endif
|
|
};
|
|
|
|
static int uart_mcux_poll_in(struct device *dev, unsigned char *c)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t flags = UART_GetStatusFlags(config->base);
|
|
int ret = -1;
|
|
|
|
if (flags & kUART_RxDataRegFullFlag) {
|
|
*c = UART_ReadByte(config->base);
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned char uart_mcux_poll_out(struct device *dev, unsigned char c)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
|
|
while (!(UART_GetStatusFlags(config->base) & kUART_TxDataRegEmptyFlag))
|
|
;
|
|
|
|
UART_WriteByte(config->base, c);
|
|
|
|
return c;
|
|
}
|
|
|
|
static int uart_mcux_err_check(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t flags = UART_GetStatusFlags(config->base);
|
|
int err = 0;
|
|
|
|
if (flags & kUART_RxOverrunFlag) {
|
|
err |= UART_ERROR_OVERRUN;
|
|
}
|
|
|
|
if (flags & kUART_ParityErrorFlag) {
|
|
err |= UART_ERROR_PARITY;
|
|
}
|
|
|
|
if (flags & kUART_FramingErrorFlag) {
|
|
err |= UART_ERROR_FRAMING;
|
|
}
|
|
|
|
UART_ClearStatusFlags(config->base, kUART_RxOverrunFlag |
|
|
kUART_ParityErrorFlag |
|
|
kUART_FramingErrorFlag);
|
|
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static int uart_mcux_fifo_fill(struct device *dev, const u8_t *tx_data,
|
|
int len)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u8_t num_tx = 0;
|
|
|
|
while ((len - num_tx > 0) &&
|
|
(UART_GetStatusFlags(config->base) & kUART_TxDataRegEmptyFlag)) {
|
|
|
|
UART_WriteByte(config->base, tx_data[num_tx++]);
|
|
}
|
|
|
|
return num_tx;
|
|
}
|
|
|
|
static int uart_mcux_fifo_read(struct device *dev, u8_t *rx_data,
|
|
const int len)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u8_t num_rx = 0;
|
|
|
|
while ((len - num_rx > 0) &&
|
|
(UART_GetStatusFlags(config->base) & kUART_RxDataRegFullFlag)) {
|
|
|
|
rx_data[num_rx++] = UART_ReadByte(config->base);
|
|
}
|
|
|
|
return num_rx;
|
|
}
|
|
|
|
static void uart_mcux_irq_tx_enable(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t mask = kUART_TxDataRegEmptyInterruptEnable;
|
|
|
|
UART_EnableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static void uart_mcux_irq_tx_disable(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t mask = kUART_TxDataRegEmptyInterruptEnable;
|
|
|
|
UART_DisableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static int uart_mcux_irq_tx_complete(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t flags = UART_GetStatusFlags(config->base);
|
|
|
|
return (flags & kUART_TxDataRegEmptyFlag) != 0;
|
|
}
|
|
|
|
static int uart_mcux_irq_tx_ready(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t mask = kUART_TxDataRegEmptyInterruptEnable;
|
|
|
|
return (UART_GetEnabledInterrupts(config->base) & mask)
|
|
&& uart_mcux_irq_tx_complete(dev);
|
|
}
|
|
|
|
static void uart_mcux_irq_rx_enable(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t mask = kUART_RxDataRegFullInterruptEnable;
|
|
|
|
UART_EnableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static void uart_mcux_irq_rx_disable(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t mask = kUART_RxDataRegFullInterruptEnable;
|
|
|
|
UART_DisableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static int uart_mcux_irq_rx_full(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t flags = UART_GetStatusFlags(config->base);
|
|
|
|
return (flags & kUART_RxDataRegFullFlag) != 0;
|
|
}
|
|
|
|
static int uart_mcux_irq_rx_ready(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t mask = kUART_RxDataRegFullInterruptEnable;
|
|
|
|
return (UART_GetEnabledInterrupts(config->base) & mask)
|
|
&& uart_mcux_irq_rx_full(dev);
|
|
}
|
|
|
|
static void uart_mcux_irq_err_enable(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t mask = kUART_NoiseErrorInterruptEnable |
|
|
kUART_FramingErrorInterruptEnable |
|
|
kUART_ParityErrorInterruptEnable;
|
|
|
|
UART_EnableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static void uart_mcux_irq_err_disable(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
u32_t mask = kUART_NoiseErrorInterruptEnable |
|
|
kUART_FramingErrorInterruptEnable |
|
|
kUART_ParityErrorInterruptEnable;
|
|
|
|
UART_DisableInterrupts(config->base, mask);
|
|
}
|
|
|
|
static int uart_mcux_irq_is_pending(struct device *dev)
|
|
{
|
|
return uart_mcux_irq_tx_ready(dev) || uart_mcux_irq_rx_ready(dev);
|
|
}
|
|
|
|
static int uart_mcux_irq_update(struct device *dev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void uart_mcux_irq_callback_set(struct device *dev,
|
|
uart_irq_callback_t cb)
|
|
{
|
|
struct uart_mcux_data *data = dev->driver_data;
|
|
|
|
data->callback = cb;
|
|
}
|
|
|
|
static void uart_mcux_isr(void *arg)
|
|
{
|
|
struct device *dev = arg;
|
|
struct uart_mcux_data *data = dev->driver_data;
|
|
|
|
if (data->callback) {
|
|
data->callback(dev);
|
|
}
|
|
}
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
|
|
static int uart_mcux_init(struct device *dev)
|
|
{
|
|
const struct uart_mcux_config *config = dev->config->config_info;
|
|
uart_config_t uart_config;
|
|
struct device *clock_dev;
|
|
u32_t clock_freq;
|
|
|
|
clock_dev = device_get_binding(config->clock_name);
|
|
if (clock_dev == NULL) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (clock_control_get_rate(clock_dev, config->clock_subsys,
|
|
&clock_freq)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
UART_GetDefaultConfig(&uart_config);
|
|
uart_config.enableTx = true;
|
|
uart_config.enableRx = true;
|
|
uart_config.baudRate_Bps = config->baud_rate;
|
|
|
|
UART_Init(config->base, &uart_config, clock_freq);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
config->irq_config_func(dev);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct uart_driver_api uart_mcux_driver_api = {
|
|
.poll_in = uart_mcux_poll_in,
|
|
.poll_out = uart_mcux_poll_out,
|
|
.err_check = uart_mcux_err_check,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.fifo_fill = uart_mcux_fifo_fill,
|
|
.fifo_read = uart_mcux_fifo_read,
|
|
.irq_tx_enable = uart_mcux_irq_tx_enable,
|
|
.irq_tx_disable = uart_mcux_irq_tx_disable,
|
|
.irq_tx_complete = uart_mcux_irq_tx_complete,
|
|
.irq_tx_ready = uart_mcux_irq_tx_ready,
|
|
.irq_rx_enable = uart_mcux_irq_rx_enable,
|
|
.irq_rx_disable = uart_mcux_irq_rx_disable,
|
|
.irq_rx_ready = uart_mcux_irq_rx_ready,
|
|
.irq_err_enable = uart_mcux_irq_err_enable,
|
|
.irq_err_disable = uart_mcux_irq_err_disable,
|
|
.irq_is_pending = uart_mcux_irq_is_pending,
|
|
.irq_update = uart_mcux_irq_update,
|
|
.irq_callback_set = uart_mcux_irq_callback_set,
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_UART_MCUX_0
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_0(struct device *dev);
|
|
#endif
|
|
|
|
static const struct uart_mcux_config uart_mcux_0_config = {
|
|
.base = UART0,
|
|
.clock_name = CONFIG_UART_MCUX_0_CLOCK_NAME,
|
|
.clock_subsys = (clock_control_subsys_t)CONFIG_UART_MCUX_0_CLOCK_SUBSYS,
|
|
.baud_rate = CONFIG_UART_MCUX_0_BAUD_RATE,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.irq_config_func = uart_mcux_config_func_0,
|
|
#endif
|
|
};
|
|
|
|
static struct uart_mcux_data uart_mcux_0_data;
|
|
|
|
DEVICE_AND_API_INIT(uart_0, CONFIG_UART_MCUX_0_NAME,
|
|
&uart_mcux_init,
|
|
&uart_mcux_0_data, &uart_mcux_0_config,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&uart_mcux_driver_api);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_0(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_0_IRQ_STATUS,
|
|
CONFIG_UART_MCUX_0_IRQ_STATUS_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_0), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_0_IRQ_STATUS);
|
|
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_0_IRQ_ERROR,
|
|
CONFIG_UART_MCUX_0_IRQ_ERROR_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_0), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_0_IRQ_ERROR);
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_UART_MCUX_0 */
|
|
|
|
#ifdef CONFIG_UART_MCUX_1
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_1(struct device *dev);
|
|
#endif
|
|
|
|
static const struct uart_mcux_config uart_mcux_1_config = {
|
|
.base = UART1,
|
|
.clock_name = CONFIG_UART_MCUX_1_CLOCK_NAME,
|
|
.clock_subsys = (clock_control_subsys_t)CONFIG_UART_MCUX_1_CLOCK_SUBSYS,
|
|
.baud_rate = CONFIG_UART_MCUX_1_BAUD_RATE,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.irq_config_func = uart_mcux_config_func_1,
|
|
#endif
|
|
};
|
|
|
|
static struct uart_mcux_data uart_mcux_1_data;
|
|
|
|
DEVICE_AND_API_INIT(uart_1, CONFIG_UART_MCUX_1_NAME,
|
|
&uart_mcux_init,
|
|
&uart_mcux_1_data, &uart_mcux_1_config,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&uart_mcux_driver_api);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_1(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_1_IRQ_STATUS,
|
|
CONFIG_UART_MCUX_1_IRQ_STATUS_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_1), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_1_IRQ_STATUS);
|
|
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_1_IRQ_ERROR,
|
|
CONFIG_UART_MCUX_1_IRQ_ERROR_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_1), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_1_IRQ_ERROR);
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_UART_MCUX_1 */
|
|
|
|
#ifdef CONFIG_UART_MCUX_2
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_2(struct device *dev);
|
|
#endif
|
|
|
|
static const struct uart_mcux_config uart_mcux_2_config = {
|
|
.base = UART2,
|
|
.clock_name = CONFIG_UART_MCUX_2_CLOCK_NAME,
|
|
.clock_subsys = (clock_control_subsys_t)CONFIG_UART_MCUX_2_CLOCK_SUBSYS,
|
|
.baud_rate = CONFIG_UART_MCUX_2_BAUD_RATE,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.irq_config_func = uart_mcux_config_func_2,
|
|
#endif
|
|
};
|
|
|
|
static struct uart_mcux_data uart_mcux_2_data;
|
|
|
|
DEVICE_AND_API_INIT(uart_2, CONFIG_UART_MCUX_2_NAME,
|
|
&uart_mcux_init,
|
|
&uart_mcux_2_data, &uart_mcux_2_config,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&uart_mcux_driver_api);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_2(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_2_IRQ_STATUS,
|
|
CONFIG_UART_MCUX_2_IRQ_STATUS_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_2), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_2_IRQ_STATUS);
|
|
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_2_IRQ_ERROR,
|
|
CONFIG_UART_MCUX_2_IRQ_ERROR_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_2), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_2_IRQ_ERROR);
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_UART_MCUX_2 */
|
|
|
|
#ifdef CONFIG_UART_MCUX_3
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_3(struct device *dev);
|
|
#endif
|
|
|
|
static const struct uart_mcux_config uart_mcux_3_config = {
|
|
.base = UART3,
|
|
.clock_name = CONFIG_UART_MCUX_3_CLOCK_NAME,
|
|
.clock_subsys = (clock_control_subsys_t)CONFIG_UART_MCUX_3_CLOCK_SUBSYS,
|
|
.baud_rate = CONFIG_UART_MCUX_3_BAUD_RATE,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.irq_config_func = uart_mcux_config_func_3,
|
|
#endif
|
|
};
|
|
|
|
static struct uart_mcux_data uart_mcux_3_data;
|
|
|
|
DEVICE_AND_API_INIT(uart_3, CONFIG_UART_MCUX_3_NAME,
|
|
&uart_mcux_init,
|
|
&uart_mcux_3_data, &uart_mcux_3_config,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&uart_mcux_driver_api);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_3(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_3_IRQ_STATUS,
|
|
CONFIG_UART_MCUX_3_IRQ_STATUS_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_3), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_3_IRQ_STATUS);
|
|
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_3_IRQ_ERROR,
|
|
CONFIG_UART_MCUX_3_IRQ_ERROR_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_3), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_3_IRQ_ERROR);
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_UART_MCUX_3 */
|
|
|
|
#ifdef CONFIG_UART_MCUX_4
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_4(struct device *dev);
|
|
#endif
|
|
|
|
static const struct uart_mcux_config uart_mcux_4_config = {
|
|
.base = UART4,
|
|
.clock_name = CONFIG_UART_MCUX_4_CLOCK_NAME,
|
|
.clock_subsys = (clock_control_subsys_t)CONFIG_UART_MCUX_4_CLOCK_SUBSYS,
|
|
.baud_rate = CONFIG_UART_MCUX_4_BAUD_RATE,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.irq_config_func = uart_mcux_config_func_4,
|
|
#endif
|
|
};
|
|
|
|
static struct uart_mcux_data uart_mcux_4_data;
|
|
|
|
DEVICE_AND_API_INIT(uart_4, CONFIG_UART_MCUX_4_NAME,
|
|
&uart_mcux_init,
|
|
&uart_mcux_4_data, &uart_mcux_4_config,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&uart_mcux_driver_api);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_4(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_4_IRQ_STATUS,
|
|
CONFIG_UART_MCUX_4_IRQ_STATUS_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_4), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_4_IRQ_STATUS);
|
|
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_4_IRQ_ERROR,
|
|
CONFIG_UART_MCUX_4_IRQ_ERROR_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_4), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_4_IRQ_ERROR);
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_UART_MCUX_4 */
|
|
|
|
#ifdef CONFIG_UART_MCUX_5
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_5(struct device *dev);
|
|
#endif
|
|
|
|
static const struct uart_mcux_config uart_mcux_5_config = {
|
|
.base = UART5,
|
|
.clock_name = CONFIG_UART_MCUX_5_CLOCK_NAME,
|
|
.clock_subsys = (clock_control_subsys_t)CONFIG_UART_MCUX_5_CLOCK_SUBSYS,
|
|
.baud_rate = CONFIG_UART_MCUX_5_BAUD_RATE,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.irq_config_func = uart_mcux_config_func_5,
|
|
#endif
|
|
};
|
|
|
|
static struct uart_mcux_data uart_mcux_5_data;
|
|
|
|
DEVICE_AND_API_INIT(uart_5, CONFIG_UART_MCUX_5_NAME,
|
|
&uart_mcux_init,
|
|
&uart_mcux_5_data, &uart_mcux_5_config,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&uart_mcux_driver_api);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_mcux_config_func_5(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_5_IRQ_STATUS,
|
|
CONFIG_UART_MCUX_5_IRQ_STATUS_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_5), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_5_IRQ_STATUS);
|
|
|
|
IRQ_CONNECT(CONFIG_UART_MCUX_5_IRQ_ERROR,
|
|
CONFIG_UART_MCUX_5_IRQ_ERROR_PRI,
|
|
uart_mcux_isr, DEVICE_GET(uart_5), 0);
|
|
|
|
irq_enable(CONFIG_UART_MCUX_5_IRQ_ERROR);
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_UART_MCUX_5 */
|