zephyr/boards/arm/arduino_zero/pinmux.c

68 lines
1.9 KiB
C

/*
* Copyright (c) 2018 Google LLC.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <init.h>
#include <drivers/pinmux.h>
#include <soc.h>
static int board_pinmux_init(const struct device *dev)
{
const struct device *muxa = DEVICE_DT_GET(DT_NODELABEL(pinmux_a));
const struct device *muxb = DEVICE_DT_GET(DT_NODELABEL(pinmux_b));
ARG_UNUSED(dev);
if (!device_is_ready(muxa)) {
return -ENXIO;
}
if (!device_is_ready(muxb)) {
return -ENXIO;
}
#if (ATMEL_SAM0_DT_SERCOM_CHECK(4, atmel_sam0_spi) && CONFIG_SPI_SAM0)
/* SPI SERCOM4 on MISO=PA12/pad 0, MOSI=PB10/pad 2, SCK=PB11/pad 3 */
pinmux_pin_set(muxa, 12, PINMUX_FUNC_D);
pinmux_pin_set(muxb, 10, PINMUX_FUNC_D);
pinmux_pin_set(muxb, 11, PINMUX_FUNC_D);
#endif
#if (ATMEL_SAM0_DT_SERCOM_CHECK(0, atmel_sam0_spi) && CONFIG_SPI_SAM0)
#warning Pin mapping may not be configured
#endif
#if (ATMEL_SAM0_DT_SERCOM_CHECK(1, atmel_sam0_spi) && CONFIG_SPI_SAM0)
#warning Pin mapping may not be configured
#endif
#if (ATMEL_SAM0_DT_SERCOM_CHECK(2, atmel_sam0_spi) && CONFIG_SPI_SAM0)
#warning Pin mapping may not be configured
#endif
#if (ATMEL_SAM0_DT_SERCOM_CHECK(3, atmel_sam0_spi) && CONFIG_SPI_SAM0)
#warning Pin mapping may not be configured
#endif
#if (ATMEL_SAM0_DT_SERCOM_CHECK(5, atmel_sam0_spi) && CONFIG_SPI_SAM0)
#warning Pin mapping may not be configured
#endif
#if ATMEL_SAM0_DT_TCC_CHECK(2, atmel_sam0_tcc_pwm) && \
defined(CONFIG_PWM_SAM0_TCC)
/* LED0 on PA17/TCC2/WO[1] */
pinmux_pin_set(muxa, 17, PINMUX_FUNC_E);
#endif
#ifdef CONFIG_USB_DC_SAM0
/* USB DP on PA25, USB DM on PA24 */
pinmux_pin_set(muxa, 25, PINMUX_FUNC_G);
pinmux_pin_set(muxa, 24, PINMUX_FUNC_G);
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(dac0), okay) && defined(CONFIG_DAC_SAM0)
/* DAC on PA02 */
pinmux_pin_set(muxa, 2, PINMUX_FUNC_B);
#endif
return 0;
}
SYS_INIT(board_pinmux_init, PRE_KERNEL_2, CONFIG_PINMUX_INIT_PRIORITY);