.. _samples_fpga_controller:
Zephyr FPGA controller
######################
Overview
********
This module is an FPGA driver that can easily load a bitstream, reset it, check its status, enable or disable the FPGA.
This sample demonstrates how to use the FPGA driver API and the the FPGA controller shell subsystem.
Currently the sample works with `Quicklogic Quickfeather board`_.
Requirements
************
* Zephyr RTOS
or
* Zephyr RTOS with shell subsystem enabled (for shell application)
* `Quicklogic Quickfeather board`_
Building
********
For building on QuickLogic QuickFeather board:
.. zephyr-app-commands::
:zephyr-app: samples/drivers/fpga/fpga_controller
:host-os: unix
:board: quick_feather
:goals: build
To build the FPGA Controller shell application, use the supplied
configuration file prj_shell.conf:
.. zephyr-app-commands::
:zephyr-app: samples/drivers/fpga/fpga_controller
:host-os: unix
:board: quick_feather
:conf: prj_shell.conf
:goals: build
:compact:
Running
*******
See :ref:`quickfeather` on how to load an image to the board.
Sample output
=============
Once the board is programmed, the LED should alternately flash red and green.
For the FPGA controller shell application, after connecting to the shell console you should see the following output:
.. code-block:: console
Address of the bitstream (red): 0xADDR
Address of the bitstream (green): 0xADDR
Size of the bitstream (red): 75960
Size of the bitstream (green): 75960
uart:~$
This sample is already prepared with bitstreams.
After executing the sample, you can see at what address it is stored and its size in bytes.
The FPGA controller command can now be used (``fpga load <device> <address> <size in bytes>``):
.. code-block:: console
uart:~$ fpga load FPGA 0x2001a46c 75960
FPGA: loading bitstream
The LED should start blinking (color depending on the selected bitstream).
To upload the bitstream again you need to reset the FPGA:
.. code-block:: console
uart:~$ fpga reset FPGA
FPGA: resetting FPGA
You can also use your own bitstream.
To load a bitstream into device memory, use `devmem load` command.
It is important to use the -e option when sending a bistream via `xxd`:
.. code-block:: console
uart:~$ devmem load -e 0x10000
Loading...
Press ctrl-x + ctrl-q to stop
Now, the loader is waiting for data.
You can either type it directly from the console or send it from the host PC (replace `ttyX` with the appropriate one for your shell console):
.. code-block:: console
xxd -p data > /dev/ttyX
(It is important to use plain-style hex dump)
Once the data is transferred, use `ctrl-x + ctrl-q` to quit loader.
It will print the sum of the read bytes and return to the shell:
.. code-block:: console
Number of bytes read: 75960
uart:~$
Now the bitstream can be uploaded again.
.. code-block:: console
uart:~$ fpga load FPGA 0x10000 75960
FPGA: loading bitstream
References
**********
.. _Quicklogic Quickfeather board:
https://github.com/QuickLogic-Corp/quick-feather-dev-board
0b90fd5adf