zephyr

History

Keith Packard 0b90fd5adf samples, tests, boards: Switch main return type from void to int As both C and C++ standards require applications running under an OS to return 'int', adapt that for Zephyr to align with those standard. This also eliminates errors when building with clang when not using -ffreestanding, and reduces the need for compiler flags to silence warnings for both clang and gcc. Most of these changes were automated using coccinelle with the following script: @@ @@ - void + int main(...) { ... - return; + return 0; ... } Approximately 40 files had to be edited by hand as coccinelle was unable to fix them. Signed-off-by: Keith Packard <keithp@keithp.com>		2023-04-14 07:49:41 +09:00
..
boards	…
src	samples, tests, boards: Switch main return type from void to int	2023-04-14 07:49:41 +09:00
CMakeLists.txt	…
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. _lp5562:

LP5562: 4-Channel RGB
######################

Overview
********

This sample controls 4 LEDs connected to a TI LP5562 driver, using the
following pattern:

 1. turn on LEDs to be red
 2. turn on LEDs to be green
 3. turn on LEDs to be blue
 4. turn on LEDs to be white
 5. turn on LEDs to be yellow
 6. turn on LEDs to be purple
 7. turn on LEDs to be cyan
 8. turn on LEDs to be orange
 9. turn off LEDs
 10. blink the LEDs in white
 11. turn off LEDs
 12. blink the LEDs in purple
 13. turn off LEDs

Refer to the `LP5562 Manual`_ for the RGB LED connections and color channel
mappings used by this sample.

Building and Running
********************

Build the application for the :ref:`nrf52840dk_nrf52840` board, and connect
a LP5562 LED driver on the bus I2C0 at the address 0x30.

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/led_lp5562
   :board: nrf52840dk_nrf52840
   :goals: build
   :compact:

For flashing the application, refer to the Flashing section of the
:ref:`nrf52840dk_nrf52840` board documentation.

.. _LP5562 Manual: http://www.ti.com/lit/ds/symlink/lp5562.pdf