zephyr

History

Kumar Gala a509441210 net: convert to using newly introduced integer sized types Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99 integer types. Jira: ZEP-2051 Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837 Signed-off-by: Kumar Gala <kumar.gala@linaro.org>		2017-04-21 09:30:38 -05:00
..
src	net: convert to using newly introduced integer sized types	2017-04-21 09:30:38 -05:00
Makefile	samples: remove obsolete KERNEL_TYPE	2016-12-20 01:12:43 +00:00
README	…
prj.conf	net: Renaming net nbuf API to net pkt API	2017-04-21 14:19:50 +03:00
testcase.ini	…

README

Application implementing 802.15.4 "serial-radio" protocol.

How to use:

1. Build and flash Zephyr application to Quark board with 802.15.4 radio,
   at the moment CC2520 radio is supported.
2. Connect board to Linux PC, /dev/ttyACM[number] should appear
3. Run Contiki-based native border router (6lbr, native-router, etc)
     Example for Contiki:
     $ cd examples/ipv6/native-border-router
     $ make
     $ sudo ./border-router.native -v5 -s ttyACM0 fd01::1/64

Now you have Contiki native border router, simple web server should show some
802.15.4 devices. Web server address is printed in the border-router output
screen:
...
Server IPv6 addresses:
 0x62c5c0: =>fd01::212:4b00:531f:113a
...
Go to http://[fd01::212:4b00:531f:113a]/

It shall show you Neighbors and Routes.

PS: Make sure your disto ModemManager is disabled, otherwise it sends AT commands
to our device ;)

$ sudo systemctl disable ModemManager.service