241 lines
6.3 KiB
C
241 lines
6.3 KiB
C
/*
|
|
* Copyright (c) 2018 Aurelien Jarno
|
|
* Copyright (c) 2018 Yong Jin
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/device.h>
|
|
#include <string.h>
|
|
#include <zephyr/drivers/flash.h>
|
|
#include <zephyr/init.h>
|
|
#include <zephyr/sys/barrier.h>
|
|
#include <soc.h>
|
|
|
|
#include "flash_stm32.h"
|
|
|
|
bool flash_stm32_valid_range(const struct device *dev, off_t offset,
|
|
uint32_t len,
|
|
bool write)
|
|
{
|
|
ARG_UNUSED(write);
|
|
|
|
return flash_stm32_range_exists(dev, offset, len);
|
|
}
|
|
|
|
static inline void flush_cache(FLASH_TypeDef *regs)
|
|
{
|
|
if (regs->ACR & FLASH_ACR_ARTEN) {
|
|
regs->ACR &= ~FLASH_ACR_ARTEN;
|
|
/* Reference manual:
|
|
* The ART cache can be flushed only if the ART accelerator
|
|
* is disabled (ARTEN = 0).
|
|
*/
|
|
regs->ACR |= FLASH_ACR_ARTRST;
|
|
regs->ACR &= ~FLASH_ACR_ARTRST;
|
|
regs->ACR |= FLASH_ACR_ARTEN;
|
|
}
|
|
}
|
|
|
|
static int write_byte(const struct device *dev, off_t offset, uint8_t val)
|
|
{
|
|
FLASH_TypeDef *regs = FLASH_STM32_REGS(dev);
|
|
int rc;
|
|
|
|
/* if the control register is locked, do not fail silently */
|
|
if (regs->CR & FLASH_CR_LOCK) {
|
|
return -EIO;
|
|
}
|
|
|
|
rc = flash_stm32_wait_flash_idle(dev);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
|
|
/* prepare to write a single byte */
|
|
regs->CR = (regs->CR & CR_PSIZE_MASK) |
|
|
FLASH_PSIZE_BYTE | FLASH_CR_PG;
|
|
/* flush the register write */
|
|
barrier_dsync_fence_full();
|
|
|
|
/* write the data */
|
|
*((uint8_t *) offset + FLASH_STM32_BASE_ADDRESS) = val;
|
|
/* flush the register write */
|
|
barrier_dsync_fence_full();
|
|
|
|
rc = flash_stm32_wait_flash_idle(dev);
|
|
regs->CR &= (~FLASH_CR_PG);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int erase_sector(const struct device *dev, uint32_t sector)
|
|
{
|
|
FLASH_TypeDef *regs = FLASH_STM32_REGS(dev);
|
|
int rc;
|
|
|
|
/* if the control register is locked, do not fail silently */
|
|
if (regs->CR & FLASH_CR_LOCK) {
|
|
return -EIO;
|
|
}
|
|
|
|
rc = flash_stm32_wait_flash_idle(dev);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
|
|
/* Dual bank mode, SNB MSB selects the bank2,
|
|
* others select sector, so we remap sector number.
|
|
*/
|
|
#if defined(FLASH_OPTCR_nDBANK) && FLASH_SECTOR_TOTAL == 24
|
|
#if CONFIG_FLASH_SIZE == 2048
|
|
if (sector > 11) {
|
|
sector += 4U;
|
|
}
|
|
#elif CONFIG_FLASH_SIZE == 1024
|
|
if (sector > 7) {
|
|
sector += 8U;
|
|
}
|
|
#endif /* CONFIG_FLASH_SIZE */
|
|
#endif /* defined(FLASH_OPTCR_nDBANK) && FLASH_SECTOR_TOTAL == 24 */
|
|
|
|
regs->CR = (regs->CR & ~(FLASH_CR_PSIZE | FLASH_CR_SNB)) |
|
|
FLASH_PSIZE_BYTE |
|
|
FLASH_CR_SER |
|
|
(sector << FLASH_CR_SNB_Pos) |
|
|
FLASH_CR_STRT;
|
|
/* flush the register write */
|
|
barrier_dsync_fence_full();
|
|
|
|
rc = flash_stm32_wait_flash_idle(dev);
|
|
regs->CR &= ~(FLASH_CR_SER | FLASH_CR_SNB);
|
|
|
|
return rc;
|
|
}
|
|
|
|
int flash_stm32_block_erase_loop(const struct device *dev,
|
|
unsigned int offset,
|
|
unsigned int len)
|
|
{
|
|
struct flash_pages_info info;
|
|
uint32_t start_sector, end_sector;
|
|
uint32_t i;
|
|
int rc = 0;
|
|
|
|
rc = flash_get_page_info_by_offs(dev, offset, &info);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
start_sector = info.index;
|
|
rc = flash_get_page_info_by_offs(dev, offset + len - 1, &info);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
end_sector = info.index;
|
|
|
|
for (i = start_sector; i <= end_sector; i++) {
|
|
rc = erase_sector(dev, i);
|
|
if (rc < 0) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
int flash_stm32_write_range(const struct device *dev, unsigned int offset,
|
|
const void *data, unsigned int len)
|
|
{
|
|
int i, rc = 0;
|
|
|
|
for (i = 0; i < len; i++, offset++) {
|
|
rc = write_byte(dev, offset, ((const uint8_t *) data)[i]);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/* Some SoC can run in single or dual bank mode, others can't.
|
|
* Different SoC flash layouts are specified in various reference
|
|
* manuals, but the flash layout for a given number of sectors is
|
|
* consistent across these manuals. The number of sectors is given
|
|
* by the HAL as FLASH_SECTOR_TOTAL. And some SoC that with same
|
|
* FLASH_SECTOR_TOTAL have different flash size.
|
|
*
|
|
* In case of 8 sectors and 24 sectors we need to differentiate
|
|
* between two cases by using the memory size.
|
|
* In case of 24 sectors we need to check if the SoC is running
|
|
* in single or dual bank mode.
|
|
*/
|
|
#ifndef FLASH_SECTOR_TOTAL
|
|
#error "Unknown flash layout"
|
|
#elif FLASH_SECTOR_TOTAL == 2
|
|
static const struct flash_pages_layout stm32f7_flash_layout[] = {
|
|
/* RM0385, table 4: STM32F750xx */
|
|
{.pages_count = 2, .pages_size = KB(32)},
|
|
};
|
|
#elif FLASH_SECTOR_TOTAL == 4
|
|
static const struct flash_pages_layout stm32f7_flash_layout[] = {
|
|
/* RM0431, table 4: STM32F730xx */
|
|
{.pages_count = 4, .pages_size = KB(16)},
|
|
};
|
|
#elif FLASH_SECTOR_TOTAL == 8
|
|
#if CONFIG_FLASH_SIZE == 512
|
|
static const struct flash_pages_layout stm32f7_flash_layout[] = {
|
|
/* RM0431, table 3: STM32F72xxx and STM32F732xx/F733xx */
|
|
{.pages_count = 4, .pages_size = KB(16)},
|
|
{.pages_count = 1, .pages_size = KB(64)},
|
|
{.pages_count = 3, .pages_size = KB(128)},
|
|
};
|
|
#elif CONFIG_FLASH_SIZE == 1024
|
|
static const struct flash_pages_layout stm32f7_flash_layout[] = {
|
|
/* RM0385, table 3: STM32F756xx and STM32F74xxx */
|
|
{.pages_count = 4, .pages_size = KB(32)},
|
|
{.pages_count = 1, .pages_size = KB(128)},
|
|
{.pages_count = 3, .pages_size = KB(256)},
|
|
};
|
|
#endif /* CONFIG_FLASH_SIZE */
|
|
#elif FLASH_SECTOR_TOTAL == 24
|
|
static const struct flash_pages_layout stm32f7_flash_layout_single_bank[] = {
|
|
/* RM0410, table 3: STM32F76xxx and STM32F77xxx in single bank */
|
|
{.pages_count = 4, .pages_size = KB(32)},
|
|
{.pages_count = 1, .pages_size = KB(128)},
|
|
{.pages_count = 7, .pages_size = KB(256)},
|
|
};
|
|
static const struct flash_pages_layout stm32f7_flash_layout_dual_bank[] = {
|
|
/* RM0410, table 4: STM32F76xxx and STM32F77xxx in dual bank */
|
|
{.pages_count = 4, .pages_size = KB(16)},
|
|
{.pages_count = 1, .pages_size = KB(64)},
|
|
{.pages_count = 7, .pages_size = KB(128)},
|
|
{.pages_count = 4, .pages_size = KB(16)},
|
|
{.pages_count = 1, .pages_size = KB(64)},
|
|
{.pages_count = 7, .pages_size = KB(128)},
|
|
};
|
|
#else
|
|
#error "Unknown flash layout"
|
|
#endif/* !defined(FLASH_SECTOR_TOTAL) */
|
|
|
|
void flash_stm32_page_layout(const struct device *dev,
|
|
const struct flash_pages_layout **layout,
|
|
size_t *layout_size)
|
|
{
|
|
#if FLASH_OPTCR_nDBANK
|
|
if (FLASH_STM32_REGS(dev)->OPTCR & FLASH_OPTCR_nDBANK) {
|
|
*layout = stm32f7_flash_layout_single_bank;
|
|
*layout_size = ARRAY_SIZE(stm32f7_flash_layout_single_bank);
|
|
} else {
|
|
*layout = stm32f7_flash_layout_dual_bank;
|
|
*layout_size = ARRAY_SIZE(stm32f7_flash_layout_dual_bank);
|
|
}
|
|
#else
|
|
ARG_UNUSED(dev);
|
|
*layout = stm32f7_flash_layout;
|
|
*layout_size = ARRAY_SIZE(stm32f7_flash_layout);
|
|
#endif
|
|
}
|