zephyr/dts/bindings
Aurelien Jarno 0b7e790250 display: ssd1673: add support for ssd16xx monochrome controllers
From the driver point of view, monochrome controllers from the ssd16xx
family mostly differ by the amount of row and columns that are
supported. If they support more than 256 rows and/or columns the
corresponding size or position is sent using 2 bytes instead of 1 byte.

This patch therefore adds the width-bits and height-bits DT properties
to make this configurable.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2019-02-02 10:28:11 -05:00
..
arc
arm dts: nordic: adding FICR binding file and macro define 2019-01-28 15:32:51 +01:00
audio dts/bindings: audio: add binding for ST MPXXDYYY pdm microphones on I2S 2019-01-28 11:57:25 -06:00
bluetooth samples: bluetooth: hci_spi: Use DT instead of Kconfig to get HW params 2019-02-01 19:12:57 -05:00
can
clock dts: nordic: correct binding file names 2019-01-28 14:00:53 +01:00
crypto
display display: ssd1673: add support for ssd16xx monochrome controllers 2019-02-02 10:28:11 -05:00
ethernet dts: bindings: smsc,lan9220: Fix warning related to id field 2019-01-24 08:38:31 -06:00
flash_controller dts: nordic: add missing nRF91 flash controller binding 2019-01-15 08:17:50 -06:00
gpio boards: remove pulpino board 2019-01-31 22:47:18 -05:00
i2c drivers: i2c_gecko: use DT_<COMPAT>_<INSTANCE>_<PROP> defines 2019-02-01 19:09:06 -05:00
i2s dts/i2s: Extend the I2S dts binding with subnodes capability 2019-01-28 11:57:25 -06:00
ieee802154 dts: ieee802154: cc1200: Add DTS support 2018-12-05 10:13:23 -06:00
iio/adc
interrupt-controller boards: remove pulpino board 2019-01-31 22:47:18 -05:00
led dts/bindings: Add binding for pwm-leds 2018-11-05 14:01:21 -06:00
led_strip led_strip: lpd880x: Add Device Tree support 2019-01-29 12:04:07 -06:00
memory-controllers
mmc disk: add a SDHC card over SPI driver. 2018-12-30 16:24:10 -05:00
modem dts-binding: modem: wnc-14a2a: remove base_label to fix build errors 2018-11-17 00:50:15 -05:00
mtd dts: bindings: cleanup mtd descriptions 2019-02-01 04:21:40 -06:00
phy dts: bindings: Add yaml files for PHY subsystem 2018-11-15 07:27:23 -06:00
pinctrl pinmux: RV32M1: introduce pinmux driver / DT bindings 2019-01-25 11:59:46 -05:00
power dts: nordic: correct binding file names 2019-01-28 14:00:53 +01:00
pwm dts: nrf: PWM device node added to nRF52 devices with yaml binding 2018-12-11 15:18:14 +01:00
riscv clock_control: RV32M1: introduce PCC driver / DT bindings 2019-01-25 11:59:46 -05:00
rng drivers: entropy: add Atmel SAM entropy generator driver 2018-11-14 12:58:49 -05:00
rtc drivers: timer: Add RTC-based system timer for Atmel SAM0 series MCU 2019-01-29 17:58:05 +01:00
sensor sensor: adxl372: Convert to new DT_<COMPAT>_<INSTANCE> defines 2019-01-30 17:51:25 -06:00
serial drivers: leuart_gecko: use DT_<COMPAT>_<INSTANCE>_<PROP> defines 2019-02-01 04:18:50 -06:00
spi dts: bindings: Add separate binding for Nordic nRF Family SPI Slave 2019-02-01 19:12:57 -05:00
sram dts: binding: Add mmio-sram binding 2018-12-13 07:25:51 -06:00
timer interrupt_controller: RV32M1: add intmux driver / DT bindings 2019-01-25 11:59:46 -05:00
usb dts/bindings/usb: Add phys property to STM32 USB yaml 2018-11-15 07:27:23 -06:00
watchdog dts: stm32: Add watchdog nodes to STM32 dtsi files 2019-02-01 19:16:59 -05:00
wifi wifi: winc1500: Add Device Tree support 2018-11-13 14:12:18 -05:00
device_node.yaml.template dts/bindings: document use of value 'base_label' 2018-10-30 19:09:34 -04:00