zephyr/drivers/sensor/sht3xd/sht3xd_trigger.c

/*
 * Copyright (c) 2016 Intel Corporation
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/device.h>
#include <zephyr/sys/util.h>
#include <zephyr/kernel.h>
#include <zephyr/drivers/sensor.h>

#include "sht3xd.h"

#include <zephyr/logging/log.h>
LOG_MODULE_DECLARE(SHT3XD, CONFIG_SENSOR_LOG_LEVEL);

static uint16_t sht3xd_temp_processed_to_raw(const struct sensor_value *val)
{
	uint64_t uval;

	/* ret = (val + 45) * (2^16 - 1) / 175 */
	uval = (uint64_t)(val->val1 + 45) * 1000000U + val->val2;
	return ((uval * 0xFFFF) / 175) / 1000000;
}

static int sht3xd_rh_processed_to_raw(const struct sensor_value *val)
{
	uint64_t uval;

	/* ret = val * (2^16 -1) / 100 */
	uval = (uint64_t)val->val1 * 1000000U + val->val2;
	return ((uval * 0xFFFF) / 100) / 1000000;
}

int sht3xd_attr_set(const struct device *dev,
		    enum sensor_channel chan,
		    enum sensor_attribute attr,
		    const struct sensor_value *val)
{
	struct sht3xd_data *data = dev->data;
	uint16_t set_cmd, clear_cmd, reg_val, temp, rh;

	if (attr == SENSOR_ATTR_LOWER_THRESH) {
		if (chan == SENSOR_CHAN_AMBIENT_TEMP) {
			data->t_low = sht3xd_temp_processed_to_raw(val);
		} else if (chan == SENSOR_CHAN_HUMIDITY) {
			data->rh_low = sht3xd_rh_processed_to_raw(val);
		} else {
			return -ENOTSUP;
		}

		set_cmd = SHT3XD_CMD_WRITE_TH_LOW_SET;
		clear_cmd = SHT3XD_CMD_WRITE_TH_LOW_CLEAR;
		temp = data->t_low;
		rh = data->rh_low;
	} else if (attr == SENSOR_ATTR_UPPER_THRESH) {
		if (chan == SENSOR_CHAN_AMBIENT_TEMP) {
			data->t_high = sht3xd_temp_processed_to_raw(val);
		} else if (chan == SENSOR_CHAN_HUMIDITY) {
			data->rh_high = sht3xd_rh_processed_to_raw(val);
		} else {
			return -ENOTSUP;
		}

		set_cmd = SHT3XD_CMD_WRITE_TH_HIGH_SET;
		clear_cmd = SHT3XD_CMD_WRITE_TH_HIGH_CLEAR;
		temp = data->t_high;
		rh = data->rh_high;
	} else {
		return -ENOTSUP;
	}

	reg_val = (rh & 0xFE00) | ((temp & 0xFF80) >> 7);

	if (sht3xd_write_reg(dev, set_cmd, reg_val) < 0 ||
	    sht3xd_write_reg(dev, clear_cmd, reg_val) < 0) {
		LOG_DBG("Failed to write threshold value!");
		return -EIO;
	}

	return 0;
}

static inline void setup_alert(const struct device *dev,
			       bool enable)
{
	const struct sht3xd_config *cfg =
		(const struct sht3xd_config *)dev->config;
	unsigned int flags = enable
		? GPIO_INT_EDGE_TO_ACTIVE
		: GPIO_INT_DISABLE;

	gpio_pin_interrupt_configure_dt(&cfg->alert_gpio, flags);
}

static inline void handle_alert(const struct device *dev)
{
	setup_alert(dev, false);

#if defined(CONFIG_SHT3XD_TRIGGER_OWN_THREAD)
	struct sht3xd_data *data = dev->data;

	k_sem_give(&data->gpio_sem);
#elif defined(CONFIG_SHT3XD_TRIGGER_GLOBAL_THREAD)
	struct sht3xd_data *data = dev->data;

	k_work_submit(&data->work);
#endif
}

int sht3xd_trigger_set(const struct device *dev,
		       const struct sensor_trigger *trig,
		       sensor_trigger_handler_t handler)
{
	struct sht3xd_data *data = dev->data;
	const struct sht3xd_config *cfg =
		(const struct sht3xd_config *)dev->config;

	setup_alert(dev, false);

	if (trig->type != SENSOR_TRIG_THRESHOLD) {
		return -ENOTSUP;
	}

	data->handler = handler;
	if (handler == NULL) {
		return 0;
	}

	data->trigger = *trig;

	setup_alert(dev, true);

	/* If ALERT is active we probably won't get the rising edge,
	 * so invoke the callback manually.
	 */
	if (gpio_pin_get_dt(&cfg->alert_gpio)) {
		handle_alert(dev);
	}

	return 0;
}

static void sht3xd_gpio_callback(const struct device *dev,
				 struct gpio_callback *cb, uint32_t pins)
{
	struct sht3xd_data *data =
		CONTAINER_OF(cb, struct sht3xd_data, alert_cb);

	handle_alert(data->dev);
}

static void sht3xd_thread_cb(const struct device *dev)
{
	struct sht3xd_data *data = dev->data;

	if (data->handler != NULL) {
		data->handler(dev, &data->trigger);
	}

	setup_alert(dev, true);
}

#ifdef CONFIG_SHT3XD_TRIGGER_OWN_THREAD
static void sht3xd_thread(struct sht3xd_data *data)
{
	while (1) {
		k_sem_take(&data->gpio_sem, K_FOREVER);
		sht3xd_thread_cb(data->dev);
	}
}
#endif

#ifdef CONFIG_SHT3XD_TRIGGER_GLOBAL_THREAD
static void sht3xd_work_cb(struct k_work *work)
{
	struct sht3xd_data *data =
		CONTAINER_OF(work, struct sht3xd_data, work);

	sht3xd_thread_cb(data->dev);
}
#endif

int sht3xd_init_interrupt(const struct device *dev)
{
	struct sht3xd_data *data = dev->data;
	const struct sht3xd_config *cfg = dev->config;
	int rc;

	if (!device_is_ready(cfg->alert_gpio.port)) {
		LOG_ERR("GPIO device not ready");
		return -ENODEV;
	}

	rc = gpio_pin_configure_dt(&cfg->alert_gpio, GPIO_INPUT);
	if (rc != 0) {
		LOG_DBG("Failed to configure alert pin %u!", cfg->alert_gpio.pin);
		return -EIO;
	}

	gpio_init_callback(&data->alert_cb, sht3xd_gpio_callback,
			   BIT(cfg->alert_gpio.pin));
	rc = gpio_add_callback(cfg->alert_gpio.port, &data->alert_cb);
	if (rc < 0) {
		LOG_DBG("Failed to set gpio callback!");
		return -EIO;
	}

	/* set alert thresholds to match measurement ranges */
	data->t_low = 0U;
	data->rh_low = 0U;
	data->t_high = 0xFFFF;
	data->rh_high = 0xFFFF;
	if (sht3xd_write_reg(dev, SHT3XD_CMD_WRITE_TH_HIGH_SET, 0xFFFF)
	    < 0) {
		LOG_DBG("Failed to write threshold high set value!");
		return -EIO;
	}

	if (sht3xd_write_reg(dev, SHT3XD_CMD_WRITE_TH_HIGH_CLEAR,
			     0xFFFF) < 0) {
		LOG_DBG("Failed to write threshold high clear value!");
		return -EIO;
	}

	if (sht3xd_write_reg(dev, SHT3XD_CMD_WRITE_TH_LOW_SET, 0) < 0) {
		LOG_DBG("Failed to write threshold low set value!");
		return -EIO;
	}

	if (sht3xd_write_reg(dev, SHT3XD_CMD_WRITE_TH_LOW_SET, 0) < 0) {
		LOG_DBG("Failed to write threshold low clear value!");
		return -EIO;
	}

#if defined(CONFIG_SHT3XD_TRIGGER_OWN_THREAD)
	k_sem_init(&data->gpio_sem, 0, K_SEM_MAX_LIMIT);

	k_thread_create(&data->thread, data->thread_stack,
			CONFIG_SHT3XD_THREAD_STACK_SIZE,
			(k_thread_entry_t)sht3xd_thread, data,
			NULL, NULL, K_PRIO_COOP(CONFIG_SHT3XD_THREAD_PRIORITY),
			0, K_NO_WAIT);
#elif defined(CONFIG_SHT3XD_TRIGGER_GLOBAL_THREAD)
	data->work.handler = sht3xd_work_cb;
#endif

	return 0;
}