zephyr/drivers/watchdog/wdt_iwdg_stm32.c

182 lines
4.4 KiB
C

/*
* Copyright (c) 2016 Open-RnD Sp. z o.o.
* Copyright (c) 2017 RnDity Sp. z o.o.
* Copyright (c) 2018 qianfan Zhao
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <watchdog.h>
#include <soc.h>
#include <errno.h>
#include <assert.h>
#include "wdt_iwdg_stm32.h"
/* Minimal timeout in microseconds. */
#define IWDG_TIMEOUT_MIN 100
/* Maximal timeout in microseconds. */
#define IWDG_TIMEOUT_MAX 26214400
#define IS_IWDG_TIMEOUT(__TIMEOUT__) \
(((__TIMEOUT__) >= IWDG_TIMEOUT_MIN) && \
((__TIMEOUT__) <= IWDG_TIMEOUT_MAX))
/*
* Status register need 5 RC LSI divided by prescaler clock to be updated.
* With higher prescaler (256U), and according to HSI variation,
* we need to wait at least 6 cycles so 48 ms.
*/
#define IWDG_DEFAULT_TIMEOUT 48u
/**
* @brief Calculates prescaler & reload values.
*
* @param timeout Timeout value in microseconds.
* @param prescaler Pointer to prescaler value.
* @param reload Pointer to reload value.
*/
static void iwdg_stm32_convert_timeout(u32_t timeout,
u32_t *prescaler,
u32_t *reload)
{
u16_t divider = 0U;
u8_t shift = 0U;
/* Convert timeout to seconds. */
float m_timeout = (float)timeout / 1000000 * LSI_VALUE;
do {
divider = 4 << shift;
shift++;
} while ((m_timeout / divider) > 0xFFF);
/*
* Value of the 'shift' variable corresponds to the
* defines of LL_IWDG_PRESCALER_XX type.
*/
*prescaler = --shift;
*reload = (u32_t)(m_timeout / divider) - 1;
}
static int iwdg_stm32_setup(struct device *dev, u8_t options)
{
IWDG_TypeDef *iwdg = IWDG_STM32_STRUCT(dev);
/* Deactivate running when debugger is attached. */
if (options & WDT_OPT_PAUSE_HALTED_BY_DBG) {
#if defined(CONFIG_SOC_SERIES_STM32F0X)
LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_DBGMCU);
#elif defined(CONFIG_SOC_SERIES_STM32L0X)
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_DBGMCU);
#endif
LL_DBGMCU_APB1_GRP1_FreezePeriph(LL_DBGMCU_APB1_GRP1_IWDG_STOP);
}
if (options & WDT_OPT_PAUSE_IN_SLEEP) {
return -ENOTSUP;
}
LL_IWDG_Enable(iwdg);
return 0;
}
static int iwdg_stm32_disable(struct device *dev)
{
/* watchdog cannot be stopped once started */
ARG_UNUSED(dev);
return -EPERM;
}
static int iwdg_stm32_install_timeout(struct device *dev,
const struct wdt_timeout_cfg *config)
{
IWDG_TypeDef *iwdg = IWDG_STM32_STRUCT(dev);
u32_t timeout = config->window.max * USEC_PER_MSEC;
u32_t prescaler = 0U;
u32_t reload = 0U;
u32_t tickstart;
if (config->callback != NULL) {
return -ENOTSUP;
}
iwdg_stm32_convert_timeout(timeout, &prescaler, &reload);
if (!(IS_IWDG_TIMEOUT(timeout) && IS_IWDG_PRESCALER(prescaler) &&
IS_IWDG_RELOAD(reload))) {
/* One of the parameters provided is invalid */
return -EINVAL;
}
tickstart = k_uptime_get_32();
while (LL_IWDG_IsReady(iwdg) == 0) {
/* Wait until WVU, RVU, PVU are reset before updating */
if ((k_uptime_get_32() - tickstart) > IWDG_DEFAULT_TIMEOUT) {
return -ENODEV;
}
}
LL_IWDG_EnableWriteAccess(iwdg);
LL_IWDG_SetPrescaler(iwdg, prescaler);
LL_IWDG_SetReloadCounter(iwdg, reload);
return 0;
}
static int iwdg_stm32_feed(struct device *dev, int channel_id)
{
IWDG_TypeDef *iwdg = IWDG_STM32_STRUCT(dev);
ARG_UNUSED(channel_id);
LL_IWDG_ReloadCounter(iwdg);
return 0;
}
static const struct wdt_driver_api iwdg_stm32_api = {
.setup = iwdg_stm32_setup,
.disable = iwdg_stm32_disable,
.install_timeout = iwdg_stm32_install_timeout,
.feed = iwdg_stm32_feed,
};
static int iwdg_stm32_init(struct device *dev)
{
#ifdef CONFIG_IWDG_STM32_START_AT_BOOT
IWDG_TypeDef *iwdg = IWDG_STM32_STRUCT(dev);
struct wdt_timeout_cfg config = {
.window.max = CONFIG_IWDG_STM32_TIMEOUT * USEC_PER_MSEC,
};
LL_IWDG_Enable(iwdg);
iwdg_stm32_install_timeout(dev, &config);
#endif
/*
* The ST production value for the option bytes where WDG_SW bit is
* present is 0x00FF55AA, namely the Software watchdog mode is
* enabled by default.
* If the IWDG is started by either hardware option or software access,
* the LSI oscillator is forced ON and cannot be disabled.
*
* t_IWDG(ms) = t_LSI(ms) x 4 x 2^(IWDG_PR[2:0]) x (IWDG_RLR[11:0] + 1)
*/
return 0;
}
static struct iwdg_stm32_data iwdg_stm32_dev_data = {
.Instance = (IWDG_TypeDef *)DT_INST_0_ST_STM32_WATCHDOG_BASE_ADDRESS
};
DEVICE_AND_API_INIT(iwdg_stm32, DT_INST_0_ST_STM32_WATCHDOG_LABEL,
iwdg_stm32_init, &iwdg_stm32_dev_data, NULL,
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
&iwdg_stm32_api);