237 lines
6.5 KiB
C
237 lines
6.5 KiB
C
/*
|
|
* Copyright (c) 2020 Nuvoton Technology Corporation.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT nuvoton_npcx_pwm
|
|
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
#include <zephyr/drivers/pwm.h>
|
|
#include <zephyr/dt-bindings/clock/npcx_clock.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#include <zephyr/kernel.h>
|
|
#include <soc.h>
|
|
|
|
#include <zephyr/logging/log.h>
|
|
|
|
LOG_MODULE_REGISTER(pwm_npcx, LOG_LEVEL_ERR);
|
|
|
|
/* 16-bit period cycles/prescaler in NPCX PWM modules */
|
|
#define NPCX_PWM_MAX_PRESCALER (1UL << (16))
|
|
#define NPCX_PWM_MAX_PERIOD_CYCLES (1UL << (16))
|
|
|
|
/* PWM clock sources */
|
|
#define NPCX_PWM_CLOCK_APB2_LFCLK 0
|
|
#define NPCX_PWM_CLOCK_FX 1
|
|
#define NPCX_PWM_CLOCK_FR 2
|
|
#define NPCX_PWM_CLOCK_RESERVED 3
|
|
|
|
/* PWM heart-beat mode selection */
|
|
#define NPCX_PWM_HBM_NORMAL 0
|
|
#define NPCX_PWM_HBM_25 1
|
|
#define NPCX_PWM_HBM_50 2
|
|
#define NPCX_PWM_HBM_100 3
|
|
|
|
/* Device config */
|
|
struct pwm_npcx_config {
|
|
/* pwm controller base address */
|
|
struct pwm_reg *base;
|
|
/* clock configuration */
|
|
struct npcx_clk_cfg clk_cfg;
|
|
/* pinmux configuration */
|
|
const struct pinctrl_dev_config *pcfg;
|
|
};
|
|
|
|
/* Driver data */
|
|
struct pwm_npcx_data {
|
|
/* PWM cycles per second */
|
|
uint32_t cycles_per_sec;
|
|
};
|
|
|
|
/* PWM local functions */
|
|
static void pwm_npcx_configure(const struct device *dev, int clk_bus)
|
|
{
|
|
const struct pwm_npcx_config *config = dev->config;
|
|
struct pwm_reg *inst = config->base;
|
|
|
|
/* Disable PWM for module configuration first */
|
|
inst->PWMCTL &= ~BIT(NPCX_PWMCTL_PWR);
|
|
|
|
/* Set default PWM polarity to normal */
|
|
inst->PWMCTL &= ~BIT(NPCX_PWMCTL_INVP);
|
|
|
|
/* Turn off PWM heart-beat mode */
|
|
SET_FIELD(inst->PWMCTL, NPCX_PWMCTL_HB_DC_CTL_FIELD,
|
|
NPCX_PWM_HBM_NORMAL);
|
|
|
|
/* Select APB CLK/LFCLK clock sources to PWM module by default */
|
|
SET_FIELD(inst->PWMCTLEX, NPCX_PWMCTLEX_FCK_SEL_FIELD,
|
|
NPCX_PWM_CLOCK_APB2_LFCLK);
|
|
|
|
/* Select clock source to LFCLK by flag, otherwise APB clock source */
|
|
if (clk_bus == NPCX_CLOCK_BUS_LFCLK)
|
|
inst->PWMCTL |= BIT(NPCX_PWMCTL_CKSEL);
|
|
else
|
|
inst->PWMCTL &= ~BIT(NPCX_PWMCTL_CKSEL);
|
|
}
|
|
|
|
/* PWM api functions */
|
|
static int pwm_npcx_set_cycles(const struct device *dev, uint32_t channel,
|
|
uint32_t period_cycles, uint32_t pulse_cycles,
|
|
pwm_flags_t flags)
|
|
{
|
|
/* Single channel for each pwm device */
|
|
ARG_UNUSED(channel);
|
|
const struct pwm_npcx_config *config = dev->config;
|
|
struct pwm_npcx_data *const data = dev->data;
|
|
struct pwm_reg *inst = config->base;
|
|
int prescaler;
|
|
uint32_t ctl;
|
|
uint32_t ctr;
|
|
uint32_t dcr;
|
|
uint32_t prsc;
|
|
|
|
ctl = inst->PWMCTL | BIT(NPCX_PWMCTL_PWR);
|
|
|
|
/* Select PWM inverted polarity (ie. active-low pulse). */
|
|
if (flags & PWM_POLARITY_INVERTED) {
|
|
ctl |= BIT(NPCX_PWMCTL_INVP);
|
|
} else {
|
|
ctl &= ~BIT(NPCX_PWMCTL_INVP);
|
|
}
|
|
|
|
/* If pulse_cycles is 0, switch PWM off and return. */
|
|
if (pulse_cycles == 0) {
|
|
ctl &= ~BIT(NPCX_PWMCTL_PWR);
|
|
inst->PWMCTL = ctl;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Calculate PWM prescaler that let period_cycles map to
|
|
* maximum pwm period cycles and won't exceed it.
|
|
* Then prescaler = ceil (period_cycles / pwm_max_period_cycles)
|
|
*/
|
|
prescaler = DIV_ROUND_UP(period_cycles, NPCX_PWM_MAX_PERIOD_CYCLES);
|
|
if (prescaler > NPCX_PWM_MAX_PRESCALER) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set PWM prescaler. */
|
|
prsc = prescaler - 1;
|
|
|
|
/* Set PWM period cycles. */
|
|
ctr = (period_cycles / prescaler) - 1;
|
|
|
|
/* Set PWM pulse cycles. */
|
|
dcr = (pulse_cycles / prescaler) - 1;
|
|
|
|
LOG_DBG("freq %d, pre %d, period %d, pulse %d",
|
|
data->cycles_per_sec / period_cycles, prsc, ctr, dcr);
|
|
|
|
/* Reconfigure only if necessary. */
|
|
if (inst->PWMCTL != ctl || inst->PRSC != prsc || inst->CTR != ctr) {
|
|
/* Disable PWM before configuring. */
|
|
inst->PWMCTL &= ~BIT(NPCX_PWMCTL_PWR);
|
|
|
|
inst->PRSC = prsc;
|
|
inst->CTR = ctr;
|
|
inst->DCR = dcr;
|
|
|
|
/* Enable PWM now. */
|
|
inst->PWMCTL = ctl;
|
|
|
|
return 0;
|
|
}
|
|
|
|
inst->DCR = dcr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_npcx_get_cycles_per_sec(const struct device *dev,
|
|
uint32_t channel, uint64_t *cycles)
|
|
{
|
|
/* Single channel for each pwm device */
|
|
ARG_UNUSED(channel);
|
|
struct pwm_npcx_data *const data = dev->data;
|
|
|
|
*cycles = data->cycles_per_sec;
|
|
return 0;
|
|
}
|
|
|
|
/* PWM driver registration */
|
|
static const struct pwm_driver_api pwm_npcx_driver_api = {
|
|
.set_cycles = pwm_npcx_set_cycles,
|
|
.get_cycles_per_sec = pwm_npcx_get_cycles_per_sec
|
|
};
|
|
|
|
static int pwm_npcx_init(const struct device *dev)
|
|
{
|
|
const struct pwm_npcx_config *const config = dev->config;
|
|
struct pwm_npcx_data *const data = dev->data;
|
|
struct pwm_reg *const inst = config->base;
|
|
const struct device *const clk_dev = DEVICE_DT_GET(NPCX_CLK_CTRL_NODE);
|
|
int ret;
|
|
|
|
/*
|
|
* NPCX PWM module mixes byte and word registers together. Make sure
|
|
* word reg access via structure won't break into two byte reg accesses
|
|
* unexpectedly by toolchains options or attributes. If so, stall here.
|
|
*/
|
|
NPCX_REG_WORD_ACCESS_CHECK(inst->PRSC, 0xA55A);
|
|
|
|
|
|
if (!device_is_ready(clk_dev)) {
|
|
LOG_ERR("clock control device not ready");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Turn on device clock first and get source clock freq. */
|
|
ret = clock_control_on(clk_dev, (clock_control_subsys_t)
|
|
&config->clk_cfg);
|
|
if (ret < 0) {
|
|
LOG_ERR("Turn on PWM clock fail %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clock_control_get_rate(clk_dev, (clock_control_subsys_t)
|
|
&config->clk_cfg, &data->cycles_per_sec);
|
|
if (ret < 0) {
|
|
LOG_ERR("Get PWM clock rate error %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Configure PWM device initially */
|
|
pwm_npcx_configure(dev, config->clk_cfg.bus);
|
|
|
|
/* Configure pin-mux for PWM device */
|
|
ret = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
|
|
if (ret < 0) {
|
|
LOG_ERR("PWM pinctrl setup failed (%d)", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define NPCX_PWM_INIT(inst) \
|
|
PINCTRL_DT_INST_DEFINE(inst); \
|
|
\
|
|
static const struct pwm_npcx_config pwm_npcx_cfg_##inst = { \
|
|
.base = (struct pwm_reg *)DT_INST_REG_ADDR(inst), \
|
|
.clk_cfg = NPCX_DT_CLK_CFG_ITEM(inst), \
|
|
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst), \
|
|
}; \
|
|
\
|
|
static struct pwm_npcx_data pwm_npcx_data_##inst; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(inst, \
|
|
&pwm_npcx_init, NULL, \
|
|
&pwm_npcx_data_##inst, &pwm_npcx_cfg_##inst, \
|
|
PRE_KERNEL_1, CONFIG_PWM_INIT_PRIORITY, \
|
|
&pwm_npcx_driver_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(NPCX_PWM_INIT)
|