51 lines
1.3 KiB
ReStructuredText
51 lines
1.3 KiB
ReStructuredText
.. _rgb-led-sample:
|
|
|
|
PWM: RGB LED
|
|
############
|
|
|
|
Overview
|
|
********
|
|
|
|
This is a sample app which drives a RGB LED using PWM.
|
|
|
|
There are three LEDs of single color in a RGB LED. The
|
|
three LEDs will be driven by a pwm port each. The pulse
|
|
width for each pwm port will change from zero to period.
|
|
So, the brightness for each LED will change from dark to
|
|
max brightness in 11 steps. The three "for" loops (one
|
|
for each LED) will generate 1331 combinations and so,
|
|
1331 different colors. The whole process will repeat for
|
|
ever.
|
|
|
|
Wiring
|
|
******
|
|
|
|
Hexiwear K64
|
|
============
|
|
No special board setup is necessary because there is an on-board RGB LED
|
|
connected to the K64 PWM.
|
|
|
|
Arduino 101
|
|
===========
|
|
|
|
You will need to connect the LED pins to PWM0, PWM1 and PWM2
|
|
on Arduino 101 via the shield. Depending on what kind of RGB
|
|
LED you are using, please connect the common cathode to the
|
|
ground or the common anode to Vcc. You need current limiting
|
|
resistor for each of the single color LEDs.
|
|
|
|
The sample app requires three PWM ports. So, it can not work
|
|
on Quark D2000 platform.
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
This samples does not output anything to the console. It can be built and
|
|
flashed to a board as follows:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/basic/rgb_led
|
|
:board: hexiwear_k64
|
|
:goals: build flash
|
|
:compact:
|