zephyr/include/drivers/k20_watchdog.h

139 lines
3.7 KiB
C

/* Freescale K20 microprocessor Watch Dog registers */
/*
* Copyright (c) 2013-2014 Wind River Systems, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* DESCRIPTION
* This module defines Watch Dog Registers for the K20 Family of microprocessors
*/
#ifndef _K20WDOG_H_
#define _K20WDOG_H_
#include <stdint.h>
/* Sequence of writes within 20 bus cycles for action to take effect */
#define WDOG_REFRESH_1 0xA602
#define WDOG_REFRESH_2 0xB480
#define WDOG_UNLOCK_1 0xC520
#define WDOG_UNLOCK_2 0xD928
union WDOG_STCTRLH {
uint16_t value; /* reset= 0x01D3 */
struct {
uint8_t wdogen : 1 __packed;
uint8_t clksrc : 1 __packed;
uint8_t irqrsten : 1 __packed;
uint8_t winen : 1 __packed;
uint8_t allowupdate : 1 __packed;
uint8_t dbgen : 1 __packed;
uint8_t stopen : 1 __packed;
uint8_t waiten : 1 __packed;
uint8_t res_8_9 : 2 __packed;
uint8_t testwdog : 1 __packed;
uint8_t testsel : 1 __packed;
uint8_t bytesel : 2 __packed;
uint8_t disestwdog : 1 __packed;
uint8_t res_15 : 1 __packed;
} field;
};
/* K20 Microntroller WDOG module register structure */
struct K20_WDOG {
union WDOG_STCTRLH stctrlh; /* 0x00 */
uint16_t stctrll; /* 0x02 */
uint16_t tovalh; /* 0x04 */
uint16_t tovall; /* 0x06 */
uint16_t winh; /* 0x08 */
uint16_t winl; /* 0x0A */
uint16_t refresh; /* 0x0C */
uint16_t unlock; /* 0x0E */
uint16_t tmrouth; /* 0x10 */
uint16_t tmroutl; /* 0x12 */
uint16_t rstcnt; /* 0x14 */
uint16_t presc; /* 0x16 */
};
/**/
/**< Macro to enable all interrupts. */
#define EnableInterrupts __asm__(" CPSIE i");
/**< Macro to disable all interrupts. */
#define DisableInterrupts __asm__(" CPSID i");
/**/
/**
*
* @brief Watchdog timer unlock routine.
*
* This routine will unlock the watchdog timer registers for write access.
* Writing 0xC520 followed by 0xD928 will unlock the write-once registers
* in the WDOG so they are writable within the WCT period.
*
* @return N/A
*/
static ALWAYS_INLINE void wdog_unlock(volatile struct K20_WDOG *wdog_p)
{
/*
* NOTE: DO NOT SINGLE STEP THROUGH THIS FUNCTION!!!
* There are timing requirements for the execution of the unlock
* process.
* Single stepping through the code you will cause the CPU to reset.
*/
/*
* This sequence must execute within 20 clock cycles, so disable
* interrupts to keep the code atomic and ensure the timing.
*/
DisableInterrupts;
/* Write 2-word unlock sequence to unlock register */
wdog_p->unlock = (uint16_t)WDOG_UNLOCK_1;
wdog_p->unlock = (uint16_t)WDOG_UNLOCK_2;
/* Re-enable interrupts now that we are done */
EnableInterrupts;
}
/**
*
* @brief Watchdog timer disable routine
*
* This routine will disable the watchdog timer.
*
* @return N/A
*/
static ALWAYS_INLINE void wdog_disable(volatile struct K20_WDOG *wdog_p)
{
union WDOG_STCTRLH_t stctrlh;
/* First unlock the watchdog so that we can write to registers */
wdog_unlock(wdog_p);
/*
* Writes to control/configuration registers must execute within
* 256 clock cycles after unlocking, so interrupts may need to be
* disabled to ensure the timing.
*/
stctrlh.value = wdog_p->stctrlh.value;
stctrlh.field.wdogen = 0;
wdog_p->stctrlh.value = stctrlh.value;
}
#endif /* _K20WDOG_H_ */