zephyr/dts/arm/xilinx/zynqmp.dtsi

275 lines
7.1 KiB
Plaintext

/*
* Copyright (c) 2019 Lexmark International, Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <mem.h>
#include <arm/armv7-r.dtsi>
#include <zephyr/dt-bindings/interrupt-controller/arm-gic.h>
#include <zephyr/dt-bindings/ethernet/xlnx_gem.h>
/ {
soc {
flash0: flash@c0000000 {
compatible = "soc-nv-flash";
reg = <0xc0000000 DT_SIZE_M(32)>;
};
sram0: memory@0 {
compatible = "mmio-sram";
reg = <0 DT_SIZE_M(64)>;
};
ocm: memory@fffc0000 {
compatible = "zephyr,memory-region", "xlnx,zynq-ocm";
reg = <0xfffc0000 DT_SIZE_K(256)>;
zephyr,memory-region = "OCM";
};
uart0: uart@ff000000 {
compatible = "xlnx,xuartps";
reg = <0xff000000 0x4c>;
status = "disabled";
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
};
uart1: uart@ff010000 {
compatible = "xlnx,xuartps";
reg = <0xff010000 0x4c>;
status = "disabled";
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
};
ttc0: timer@ff110000 {
compatible = "xlnx,ttcps";
status = "disabled";
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 37 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 38 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1", "irq_2";
reg = <0xff110000 0x1000>;
};
ttc1: timer@ff120000 {
compatible = "xlnx,ttcps";
status = "disabled";
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 40 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 41 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1", "irq_2";
reg = <0xff120000 0x1000>;
};
ttc2: timer@ff130000 {
compatible = "xlnx,ttcps";
status = "disabled";
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 43 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 44 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1", "irq_2";
reg = <0xff130000 0x1000>;
};
ttc3: timer@ff140000 {
compatible = "xlnx,ttcps";
status = "disabled";
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 46 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 47 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1", "irq_2";
reg = <0xff140000 0x1000>;
};
gem0: ethernet@ff0b0000 {
compatible = "xlnx,gem";
reg = <0xff0b0000 0x1000>,
<0xff5e0050 0x4>;
status = "disabled";
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 58 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
hw-rx-buffer-offset = <0>;
hw-tx-buffer-size-full;
rx-buffer-descriptors = <32>;
tx-buffer-descriptors = <32>;
rx-buffer-size = <512>;
tx-buffer-size = <512>;
discard-rx-fcs;
unicast-hash;
full-duplex;
};
gem1: ethernet@ff0c0000 {
compatible = "xlnx,gem";
reg = <0xff0c0000 0x1000>,
<0xff5e0054 0x4>;
status = "disabled";
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 60 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
hw-rx-buffer-offset = <0>;
hw-tx-buffer-size-full;
rx-buffer-descriptors = <32>;
tx-buffer-descriptors = <32>;
rx-buffer-size = <512>;
tx-buffer-size = <512>;
discard-rx-fcs;
unicast-hash;
full-duplex;
};
gem2: ethernet@ff0d0000 {
compatible = "xlnx,gem";
reg = <0xff0d0000 0x1000>,
<0xff5e0058 0x4>;
status = "disabled";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 62 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
hw-rx-buffer-offset = <0>;
hw-tx-buffer-size-full;
rx-buffer-descriptors = <32>;
tx-buffer-descriptors = <32>;
rx-buffer-size = <512>;
tx-buffer-size = <512>;
discard-rx-fcs;
unicast-hash;
full-duplex;
};
gem3: ethernet@ff0e0000 {
compatible = "xlnx,gem";
reg = <0xff0e0000 0x1000>,
<0xff5e005c 0x4>;
status = "disabled";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>,
<GIC_SPI 64 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
hw-rx-buffer-offset = <0>;
hw-tx-buffer-size-full;
rx-buffer-descriptors = <32>;
tx-buffer-descriptors = <32>;
rx-buffer-size = <512>;
tx-buffer-size = <512>;
discard-rx-fcs;
unicast-hash;
full-duplex;
};
psgpio: gpio@ff0a0000 {
compatible = "xlnx,ps-gpio";
status = "disabled";
reg = <0xff0a0000 0x1000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
#address-cells = <1>;
#size-cells = <0>;
psgpio_bank0: psgpio_bank@0 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <26>;
status = "okay";
};
psgpio_bank1: psgpio_bank@1 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x1>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <26>;
status = "okay";
};
psgpio_bank2: psgpio_bank@2 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x2>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <26>;
status = "okay";
};
psgpio_bank3: psgpio_bank@3 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x3>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
status = "okay";
};
psgpio_bank4: psgpio_bank@4 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x4>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
status = "okay";
};
psgpio_bank5: psgpio_bank@5 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x5>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
status = "okay";
};
};
};
};