185 lines
6.2 KiB
ReStructuredText
185 lines
6.2 KiB
ReStructuredText
.. _efr32mg24_dk2601b:
|
|
|
|
xG24-DK2601B
|
|
###########################
|
|
|
|
Overview
|
|
********
|
|
|
|
The EFR32MG24 Mighty Gecko Board dev kit contains
|
|
a Wireless System-On-Chip from the EFR32MG24 family built on an
|
|
ARM Cortex®-M33F processor with excellent low power capabilities.
|
|
|
|
.. figure:: ./img/efr32xg24_dk2601b.jpg
|
|
:height: 260px
|
|
:align: center
|
|
:alt: SLWRB4180A Mighty Gecko Radio Board
|
|
|
|
xG24-DK2601B (image courtesy of Silicon Labs)
|
|
|
|
Hardware
|
|
********
|
|
|
|
- EFR32MG24B310F1536IM48-B Mighty Gecko SoC
|
|
- CPU core: ARM Cortex®-M33 with FPU
|
|
- Flash memory: 1536 kB
|
|
- RAM: 256 kB
|
|
- Transmit power: up to +20 dBm
|
|
- Operation frequency: 2.4 GHz
|
|
- Crystals for LFXO (32.768 kHz) and HFXO (38.4 MHz).
|
|
- On board sensors:
|
|
|
|
- Silicon Labs Si7021 relative humidity & temperature sensor
|
|
- Silicon Labs Si7210 hall effect sensor
|
|
- 2x TDK InvenSense ICS-43434 MEMS microphones with I2S output
|
|
- TDK InvenSense ICM-20689 6-axis inertial measurement sensor
|
|
- Vishay VEML6035 ambient light sensor
|
|
- Bosch BMP384 pressure sensor with internal temperature sensor
|
|
|
|
For more information about the EFR32MG24 SoC and BRD2601B board, refer to these
|
|
documents:
|
|
|
|
- `EFR32MG24 Website`_
|
|
- `EFR32MG24 Datasheet`_
|
|
- `EFR32xG24 Reference Manual`_
|
|
- `BRD2601B User Guide`_
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The board configuration supports the following hardware features:
|
|
|
|
+-----------+------------+-------------------------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+=====================================+
|
|
| MPU | on-chip | memory protection unit |
|
|
+-----------+------------+-------------------------------------+
|
|
| NVIC | on-chip | nested vector interrupt controller |
|
|
+-----------+------------+-------------------------------------+
|
|
| SYSTICK | on-chip | systick |
|
|
+-----------+------------+-------------------------------------+
|
|
| COUNTER | on-chip | stimer |
|
|
+-----------+------------+-------------------------------------+
|
|
| FLASH | on-chip | flash memory |
|
|
+-----------+------------+-------------------------------------+
|
|
| GPIO | on-chip | gpio |
|
|
+-----------+------------+-------------------------------------+
|
|
| UART | on-chip | serial |
|
|
+-----------+------------+-------------------------------------+
|
|
| TRNG | on-chip | semailbox |
|
|
+-----------+------------+-------------------------------------+
|
|
| WATCHDOG | on-chip | watchdog |
|
|
+-----------+------------+-------------------------------------+
|
|
| I2C(M/S) | on-chip | i2c |
|
|
+-----------+------------+-------------------------------------+
|
|
| RADIO | on-chip | bluetooth |
|
|
+-----------+------------+-------------------------------------+
|
|
|
|
Other hardware features are currently not supported by the port.
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
In the following table, the column **Name** contains Pin names. For example, PA2
|
|
means Pin number 2 on PORTA, as used in the board's datasheets and manuals.
|
|
|
|
+-------+-------------+-------------------------------------+
|
|
| Name | Function | Usage |
|
|
+=======+=============+=====================================+
|
|
| PA4 | GPIO | LED0 |
|
|
+-------+-------------+-------------------------------------+
|
|
| PB0 | GPIO | LED1 |
|
|
+-------+-------------+-------------------------------------+
|
|
| PB2 | GPIO | Push Button 0 |
|
|
+-------+-------------+-------------------------------------+
|
|
| PB3 | GPIO | Push Button 1 |
|
|
+-------+-------------+-------------------------------------+
|
|
| PA5 | USART0_TX | UART Console EFM_BC_TX US0_TX |
|
|
+-------+-------------+-------------------------------------+
|
|
| PA6 | USART0_RX | UART Console EFM_BC_RX US0_RX |
|
|
+-------+-------------+-------------------------------------+
|
|
|
|
The default configuration can be found in
|
|
:zephyr_file:`boards/silabs/efr32xg24_dk2601b/efr32xg24_dk2601b_defconfig`
|
|
|
|
System Clock
|
|
============
|
|
|
|
The EFR32MG24 SoC is configured to use the 39 MHz external oscillator on the
|
|
board.
|
|
|
|
Serial Port
|
|
===========
|
|
|
|
The EFR32MG24 SoC has one USART and two EUSARTs.
|
|
USART0 is connected to the board controller and is used for the console.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
.. note::
|
|
Before using the kit the first time, you should update the J-Link firmware
|
|
from `J-Link-Downloads`_
|
|
|
|
Flashing
|
|
========
|
|
|
|
The sample application :ref:`hello_world` is used for this example.
|
|
Build the Zephyr kernel and application:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: efr32xg24_dk2601b
|
|
:goals: build
|
|
|
|
Connect the efr32xg24_dk2601b to your host computer using the USB port and you
|
|
should see a USB connection.
|
|
|
|
Open a serial terminal (minicom, putty, etc.) with the following settings:
|
|
|
|
- Speed: 115200
|
|
- Data: 8 bits
|
|
- Parity: None
|
|
- Stop bits: 1
|
|
|
|
Reset the board and you'll see the following message on the corresponding serial port
|
|
terminal session:
|
|
|
|
.. code-block:: console
|
|
|
|
Hello World! efr32xg24_dk2601b
|
|
|
|
Bluetooth
|
|
=========
|
|
|
|
To use the BLE function, run the command below to retrieve necessary binary
|
|
blobs from the SiLabs HAL repository.
|
|
|
|
.. code-block:: console
|
|
|
|
west blobs fetch silabs
|
|
|
|
Then build the Zephyr kernel and a Bluetooth sample with the following
|
|
command. The :ref:`bluetooth-observer-sample` sample application is used in
|
|
this example.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/bluetooth/observer
|
|
:board: efr32xg24_dk2601b
|
|
:goals: build
|
|
|
|
.. _EFR32MG24 Website:
|
|
https://www.silabs.com/wireless/zigbee/efr32mg24-series-2-socs#
|
|
|
|
.. _EFR32MG24 Datasheet:
|
|
https://www.silabs.com/documents/public/data-sheets/efr32mg24-datasheet.pdf
|
|
|
|
.. _EFR32xG24 Reference Manual:
|
|
https://www.silabs.com/documents/public/reference-manuals/efr32xg24-rm.pdf
|
|
|
|
.. _BRD2601B User Guide:
|
|
https://www.silabs.com/documents/public/user-guides/ug524-brd2601b-user-guide.pdf
|
|
|
|
.. _J-Link-Downloads:
|
|
https://www.segger.com/downloads/jlink
|