zephyr/soc/quicklogic/eos_s3/soc.c

68 lines
1.4 KiB
C

/*
* Copyright (c) 2020 Antmicro <www.antmicro.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <zephyr/kernel.h>
#include <zephyr/init.h>
#include <soc.h>
#include <soc_pinmap.h>
#include <cmsis_core.h>
void eos_s3_lock_enable(void)
{
MISC_CTRL->LOCK_KEY_CTRL = MISC_LOCK_KEY;
}
void eos_s3_lock_disable(void)
{
MISC_CTRL->LOCK_KEY_CTRL = 1;
}
static void eos_s3_cru_init(void)
{
/* Set desired frequency */
AIP->OSC_CTRL_0 |= AIP_OSC_CTRL_EN;
AIP->OSC_CTRL_0 &= ~AIP_OSC_CTRL_FRE_SEL;
OSC_SET_FREQ_INC(CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC);
while (!OSC_CLK_LOCKED()) {
;
}
/* Enable all clocks for every domain */
CRU->CLK_DIVIDER_CLK_GATING = (CLK_DIVIDER_A_CG | CLK_DIVIDER_B_CG
| CLK_DIVIDER_C_CG | CLK_DIVIDER_D_CG | CLK_DIVIDER_F_CG
| CLK_DIVIDER_G_CG | CLK_DIVIDER_H_CG | CLK_DIVIDER_I_CG
| CLK_DIVIDER_J_CG);
/* Turn off divisor for A0 domain */
CRU->CLK_CTRL_A_0 = 0;
/* Enable UART, WDT and TIMER peripherals */
CRU->C11_CLK_GATE = C11_CLK_GATE_PATH_0_ON;
/* Set divider for domain C11 to ~ 5.12MHz */
CRU->CLK_CTRL_D_0 = (CLK_CTRL_CLK_DIVIDER_ENABLE |
CLK_CTRL_CLK_DIVIDER_RATIO_12);
}
void soc_early_init_hook(void)
{
/* Clocks setup */
eos_s3_lock_enable();
eos_s3_cru_init();
eos_s3_lock_disable();
SCnSCB->ACTLR |= SCnSCB_ACTLR_DISDEFWBUF_Msk;
/* Clear all interrupts */
INTR_CTRL->OTHER_INTR = 0xFFFFFF;
/* Enable UART interrupt */
INTR_CTRL->OTHER_INTR_EN_M4 = UART_INTR_EN_M4;
}