zephyr

History

Peter Bigot 49d6837bec samples: move board overlay files into boards directory Application board.overlay files tend to be paired with boards/board.conf files that extend the functionality of a board. Move the overlay files to the same location as the config files that they work with. A few overlay files that are paired with a prj_board.conf file in the application root directory are left in place. Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>		2019-10-01 20:38:24 -07:00
..
boards	samples: move board overlay files into boards directory	2019-10-01 20:38:24 -07:00
src	cleanup: include/: move misc/util.h to sys/util.h	2019-06-27 22:55:49 -04:00
CMakeLists.txt	license: cleanup: add SPDX Apache-2.0 license identifier	2019-04-07 08:45:22 -04:00
README.rst	…
prj.conf	…
sample.yaml	samples: add harness to exclude from device testing	2019-08-27 10:29:17 -04:00

README.rst

.. _lp5562:

LP5562: 4-Channel RGB
######################

Overview
********

This sample controls 4 LEDs connected to a TI LP5562 driver, using the
following pattern:

 1. turn on LEDs to be red
 2. turn on LEDs to be green
 3. turn on LEDs to be blue
 4. turn on LEDs to be white
 5. turn on LEDs to be yellow
 6. turn on LEDs to be purple
 7. turn on LEDs to be cyan
 8. turn on LEDs to be orange
 9. turn off LEDs
 10. blink the LEDs in white
 11. turn off LEDs
 12. blink the LEDs in purple
 13. turn off LEDs

Refer to the `LP5562 Manual`_ for the RGB LED connections and color channel
mappings used by this sample.

Building and Running
********************

Build the application for the :ref:`nrf52840_pca10056` board, and connect
a LP5562 LED driver on the bus I2C0 at the address 0x30.

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/led_lp5562
   :board: nrf52840_pca10056
   :goals: build
   :compact:

For flashing the application, refer to the Flashing section of the
:ref:`nrf52840_pca10056` board documentation.

.. _LP5562 Manual: http://www.ti.com/lit/ds/symlink/lp5562.pdf