zephyr/arch/arc/core/irq_manage.c

107 lines
2.0 KiB
C

/*
* Copyright (c) 2014 Wind River Systems, Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief ARCv2 interrupt management
*
*
* Interrupt management:
*
* - enabling/disabling
*
* An IRQ number passed to the @a irq parameters found in this file is a
* number from 16 to last IRQ number on the platform.
*/
#include <kernel.h>
#include <arch/cpu.h>
#include <misc/__assert.h>
#include <toolchain.h>
#include <linker/sections.h>
#include <sw_isr_table.h>
#include <irq.h>
#include <misc/printk.h>
/*
* @brief Enable an interrupt line
*
* Clear possible pending interrupts on the line, and enable the interrupt
* line. After this call, the CPU will receive interrupts for the specified
* @a irq.
*
* @return N/A
*/
void _arch_irq_enable(unsigned int irq)
{
int key = irq_lock();
_arc_v2_irq_unit_int_enable(irq);
irq_unlock(key);
}
/*
* @brief Disable an interrupt line
*
* Disable an interrupt line. After this call, the CPU will stop receiving
* interrupts for the specified @a irq.
*
* @return N/A
*/
void _arch_irq_disable(unsigned int irq)
{
int key = irq_lock();
_arc_v2_irq_unit_int_disable(irq);
irq_unlock(key);
}
/*
* @internal
*
* @brief Set an interrupt's priority
*
* Lower values take priority over higher values. Special case priorities are
* expressed via mutually exclusive flags.
* The priority is verified if ASSERT_ON is enabled; max priority level
* depends on CONFIG_NUM_IRQ_PRIO_LEVELS.
*
* @return N/A
*/
void _irq_priority_set(unsigned int irq, unsigned int prio, u32_t flags)
{
ARG_UNUSED(flags);
int key = irq_lock();
__ASSERT(prio < CONFIG_NUM_IRQ_PRIO_LEVELS,
"invalid priority %d for irq %d", prio, irq);
_arc_v2_irq_unit_prio_set(irq, prio);
irq_unlock(key);
}
/*
* @brief Spurious interrupt handler
*
* Installed in all dynamic interrupt slots at boot time. Throws an error if
* called.
*
* @return N/A
*/
void _irq_spurious(void *unused)
{
ARG_UNUSED(unused);
printk("_irq_spurious(). Spinning...\n");
for (;;)
;
}