355 lines
9.2 KiB
C
355 lines
9.2 KiB
C
/*
|
|
* Copyright 2023, NXP
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT sitronix_st7796s
|
|
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/spi.h>
|
|
#include <zephyr/drivers/gpio.h>
|
|
#include <zephyr/drivers/display.h>
|
|
#include <zephyr/sys/byteorder.h>
|
|
#include <zephyr/drivers/mipi_dbi.h>
|
|
|
|
#include <zephyr/logging/log.h>
|
|
LOG_MODULE_REGISTER(display_st7796s, CONFIG_DISPLAY_LOG_LEVEL);
|
|
|
|
#include "display_st7796s.h"
|
|
|
|
/* Magic numbers used to lock/unlock command settings */
|
|
#define ST7796S_UNLOCK_1 0xC3
|
|
#define ST7796S_UNLOCK_2 0x96
|
|
|
|
#define ST7796S_LOCK_1 0x3C
|
|
#define ST7796S_LOCK_2 0x69
|
|
|
|
#define ST7796S_PIXEL_SIZE 2 /* Only 16 bit color mode supported with this driver */
|
|
|
|
struct st7796s_config {
|
|
const struct device *mipi_dbi;
|
|
const struct mipi_dbi_config dbi_config;
|
|
const struct gpio_dt_spec cmd_data_gpio;
|
|
const struct gpio_dt_spec reset_gpio;
|
|
uint16_t width;
|
|
uint16_t height;
|
|
bool inverted; /* Display color inversion */
|
|
/* Display configuration parameters */
|
|
uint8_t dic; /* Display inversion control */
|
|
uint8_t frmctl1[2]; /* Frame rate control, normal mode */
|
|
uint8_t frmctl2[2]; /* Frame rate control, idle mode */
|
|
uint8_t frmctl3[2]; /* Frame rate control, partial mode */
|
|
uint8_t bpc[4]; /* Blanking porch control */
|
|
uint8_t dfc[4]; /* Display function control */
|
|
uint8_t pwr1[2]; /* Power control 1 */
|
|
uint8_t pwr2; /* Power control 2 */
|
|
uint8_t pwr3; /* Power control 3 */
|
|
uint8_t vcmpctl; /* VCOM control */
|
|
uint8_t doca[8]; /* Display output ctrl */
|
|
uint8_t pgc[14]; /* Positive gamma control */
|
|
uint8_t ngc[14]; /* Negative gamma control */
|
|
uint8_t madctl; /* Memory data access control */
|
|
};
|
|
|
|
static int st7796s_send_cmd(const struct device *dev,
|
|
uint8_t cmd, const uint8_t *data, size_t len)
|
|
{
|
|
const struct st7796s_config *config = dev->config;
|
|
|
|
return mipi_dbi_command_write(config->mipi_dbi, &config->dbi_config,
|
|
cmd, data, len);
|
|
}
|
|
|
|
static int st7796s_set_cursor(const struct device *dev,
|
|
const uint16_t x, const uint16_t y,
|
|
const uint16_t width, const uint16_t height)
|
|
{
|
|
uint16_t addr_data[2];
|
|
int ret;
|
|
|
|
/* Column address */
|
|
addr_data[0] = sys_cpu_to_be16(x);
|
|
addr_data[1] = sys_cpu_to_be16(x + width - 1);
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_CASET,
|
|
(uint8_t *)addr_data, sizeof(addr_data));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* Row address */
|
|
addr_data[0] = sys_cpu_to_be16(y);
|
|
addr_data[1] = sys_cpu_to_be16(y + height - 1);
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_RASET,
|
|
(uint8_t *)addr_data, sizeof(addr_data));
|
|
return ret;
|
|
}
|
|
|
|
static int st7796s_blanking_on(const struct device *dev)
|
|
{
|
|
return st7796s_send_cmd(dev, ST7796S_CMD_DISPOFF, NULL, 0);
|
|
}
|
|
|
|
static int st7796s_blanking_off(const struct device *dev)
|
|
{
|
|
return st7796s_send_cmd(dev, ST7796S_CMD_DISPON, NULL, 0);
|
|
}
|
|
|
|
|
|
static int st7796s_write(const struct device *dev,
|
|
const uint16_t x,
|
|
const uint16_t y,
|
|
const struct display_buffer_descriptor *desc,
|
|
const void *buf)
|
|
{
|
|
const struct st7796s_config *config = dev->config;
|
|
int ret;
|
|
struct display_buffer_descriptor mipi_desc;
|
|
enum display_pixel_format pixfmt;
|
|
|
|
ret = st7796s_set_cursor(dev, x, y, desc->width, desc->height);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
mipi_desc.buf_size = desc->width * desc->height * ST7796S_PIXEL_SIZE;
|
|
|
|
ret = mipi_dbi_command_write(config->mipi_dbi,
|
|
&config->dbi_config, ST7796S_CMD_RAMWR,
|
|
NULL, 0);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (config->madctl & ST7796S_MADCTL_BGR) {
|
|
/* Zephyr treats RGB565 as BGR565 */
|
|
pixfmt = PIXEL_FORMAT_RGB_565;
|
|
} else {
|
|
pixfmt = PIXEL_FORMAT_BGR_565;
|
|
}
|
|
|
|
return mipi_dbi_write_display(config->mipi_dbi,
|
|
&config->dbi_config, buf,
|
|
&mipi_desc, pixfmt);
|
|
}
|
|
|
|
static void st7796s_get_capabilities(const struct device *dev,
|
|
struct display_capabilities *capabilities)
|
|
{
|
|
const struct st7796s_config *config = dev->config;
|
|
|
|
memset(capabilities, 0, sizeof(struct display_capabilities));
|
|
|
|
if (config->madctl & ST7796S_MADCTL_BGR) {
|
|
/* Zephyr treats RGB565 as BGR565 */
|
|
capabilities->current_pixel_format = PIXEL_FORMAT_RGB_565;
|
|
} else {
|
|
capabilities->current_pixel_format = PIXEL_FORMAT_BGR_565;
|
|
}
|
|
capabilities->x_resolution = config->width;
|
|
capabilities->y_resolution = config->height;
|
|
capabilities->current_orientation = DISPLAY_ORIENTATION_NORMAL;
|
|
}
|
|
|
|
static int st7796s_lcd_config(const struct device *dev)
|
|
{
|
|
const struct st7796s_config *config = dev->config;
|
|
int ret;
|
|
uint8_t param;
|
|
|
|
/* Unlock display configuration */
|
|
param = ST7796S_UNLOCK_1;
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_CSCON, ¶m, sizeof(param));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
param = ST7796S_UNLOCK_2;
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_CSCON, ¶m, sizeof(param));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_DIC, &config->dic, sizeof(config->dic));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_FRMCTR1, config->frmctl1,
|
|
sizeof(config->frmctl1));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_FRMCTR2, config->frmctl2,
|
|
sizeof(config->frmctl2));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_FRMCTR3, config->frmctl3,
|
|
sizeof(config->frmctl3));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_BPC, config->bpc, sizeof(config->bpc));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_DFC, config->dfc, sizeof(config->dfc));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_PWR1, config->pwr1, sizeof(config->pwr1));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_PWR2, &config->pwr2, sizeof(config->pwr2));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_PWR3, &config->pwr3, sizeof(config->pwr3));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_VCMPCTL, &config->vcmpctl,
|
|
sizeof(config->vcmpctl));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_DOCA, config->doca,
|
|
sizeof(config->doca));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_PGC, config->pgc, sizeof(config->pgc));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_NGC, config->ngc, sizeof(config->ngc));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* Lock display configuration */
|
|
param = ST7796S_LOCK_1;
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_CSCON, ¶m, sizeof(param));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
param = ST7796S_LOCK_2;
|
|
return st7796s_send_cmd(dev, ST7796S_CMD_CSCON, ¶m, sizeof(param));
|
|
}
|
|
|
|
static int st7796s_init(const struct device *dev)
|
|
{
|
|
const struct st7796s_config *config = dev->config;
|
|
int ret;
|
|
uint8_t param;
|
|
|
|
/* Since VDDI comes up before reset pin is low, we must reset display
|
|
* state. Pulse for 100 MS, per datasheet
|
|
*/
|
|
ret = mipi_dbi_reset(config->mipi_dbi, 100);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
/* Delay an additional 100ms after reset */
|
|
k_msleep(100);
|
|
|
|
/* Configure controller parameters */
|
|
ret = st7796s_lcd_config(dev);
|
|
if (ret < 0) {
|
|
LOG_ERR("Could not set LCD configuration (%d)", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (config->inverted) {
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_INVON, NULL, 0);
|
|
} else {
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_INVOFF, NULL, 0);
|
|
}
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
param = ST7796S_CONTROL_16BIT;
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_COLMOD, ¶m, sizeof(param));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
param = config->madctl;
|
|
ret = st7796s_send_cmd(dev, ST7796S_CMD_MADCTL, ¶m, sizeof(param));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* Exit sleep */
|
|
st7796s_send_cmd(dev, ST7796S_CMD_SLPOUT, NULL, 0);
|
|
/* Delay 5ms after sleep out command, per datasheet */
|
|
k_msleep(5);
|
|
/* Turn on display */
|
|
st7796s_send_cmd(dev, ST7796S_CMD_DISPON, NULL, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct display_driver_api st7796s_api = {
|
|
.blanking_on = st7796s_blanking_on,
|
|
.blanking_off = st7796s_blanking_off,
|
|
.write = st7796s_write,
|
|
.get_capabilities = st7796s_get_capabilities,
|
|
};
|
|
|
|
|
|
#define ST7796S_INIT(n) \
|
|
static const struct st7796s_config st7796s_config_##n = { \
|
|
.mipi_dbi = DEVICE_DT_GET(DT_INST_PARENT(n)), \
|
|
.dbi_config = { \
|
|
.config = MIPI_DBI_SPI_CONFIG_DT( \
|
|
DT_DRV_INST(n), \
|
|
SPI_OP_MODE_MASTER | \
|
|
SPI_WORD_SET(8), \
|
|
0), \
|
|
.mode = MIPI_DBI_MODE_SPI_4WIRE, \
|
|
}, \
|
|
.width = DT_INST_PROP(n, width), \
|
|
.height = DT_INST_PROP(n, height), \
|
|
.inverted = DT_INST_PROP(n, color_invert), \
|
|
.dic = DT_INST_ENUM_IDX(n, invert_mode), \
|
|
.frmctl1 = DT_INST_PROP(n, frmctl1), \
|
|
.frmctl2 = DT_INST_PROP(n, frmctl2), \
|
|
.frmctl3 = DT_INST_PROP(n, frmctl3), \
|
|
.bpc = DT_INST_PROP(n, bpc), \
|
|
.dfc = DT_INST_PROP(n, dfc), \
|
|
.pwr1 = DT_INST_PROP(n, pwr1), \
|
|
.pwr2 = DT_INST_PROP(n, pwr2), \
|
|
.pwr3 = DT_INST_PROP(n, pwr3), \
|
|
.vcmpctl = DT_INST_PROP(n, vcmpctl), \
|
|
.doca = DT_INST_PROP(n, doca), \
|
|
.pgc = DT_INST_PROP(n, pgc), \
|
|
.ngc = DT_INST_PROP(n, ngc), \
|
|
.madctl = DT_INST_PROP(n, madctl), \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(n, st7796s_init, \
|
|
NULL, \
|
|
NULL, \
|
|
&st7796s_config_##n, \
|
|
POST_KERNEL, CONFIG_DISPLAY_INIT_PRIORITY, \
|
|
&st7796s_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(ST7796S_INIT)
|