129 lines
3.0 KiB
C
129 lines
3.0 KiB
C
/*
|
|
* Copyright (c) 2019 Aurelien Jarno
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT atmel_sam_pwm
|
|
|
|
#include <device.h>
|
|
#include <errno.h>
|
|
#include <drivers/pwm.h>
|
|
#include <drivers/pinctrl.h>
|
|
#include <soc.h>
|
|
|
|
#define LOG_LEVEL CONFIG_PWM_LOG_LEVEL
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(pwm_sam);
|
|
|
|
struct sam_pwm_config {
|
|
Pwm *regs;
|
|
const struct pinctrl_dev_config *pcfg;
|
|
uint32_t id;
|
|
uint8_t prescaler;
|
|
uint8_t divider;
|
|
};
|
|
|
|
static int sam_pwm_get_cycles_per_sec(const struct device *dev,
|
|
uint32_t channel, uint64_t *cycles)
|
|
{
|
|
const struct sam_pwm_config *config = dev->config;
|
|
uint8_t prescaler = config->prescaler;
|
|
uint8_t divider = config->divider;
|
|
|
|
*cycles = SOC_ATMEL_SAM_MCK_FREQ_HZ /
|
|
((1 << prescaler) * divider);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sam_pwm_set_cycles(const struct device *dev, uint32_t channel,
|
|
uint32_t period_cycles, uint32_t pulse_cycles,
|
|
pwm_flags_t flags)
|
|
{
|
|
const struct sam_pwm_config *config = dev->config;
|
|
|
|
Pwm * const pwm = config->regs;
|
|
|
|
if (channel >= PWMCHNUM_NUMBER) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (flags) {
|
|
/* PWM polarity not supported (yet?) */
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (period_cycles == 0U) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (period_cycles > 0xffff) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/* Select clock A */
|
|
pwm->PWM_CH_NUM[channel].PWM_CMR = PWM_CMR_CPRE_CLKA_Val;
|
|
|
|
/* Update period and pulse using the update registers, so that the
|
|
* change is triggered at the next PWM period.
|
|
*/
|
|
pwm->PWM_CH_NUM[channel].PWM_CPRDUPD = period_cycles;
|
|
pwm->PWM_CH_NUM[channel].PWM_CDTYUPD = pulse_cycles;
|
|
|
|
/* Enable the output */
|
|
pwm->PWM_ENA = 1 << channel;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sam_pwm_init(const struct device *dev)
|
|
{
|
|
const struct sam_pwm_config *config = dev->config;
|
|
|
|
Pwm * const pwm = config->regs;
|
|
uint32_t id = config->id;
|
|
uint8_t prescaler = config->prescaler;
|
|
uint8_t divider = config->divider;
|
|
int retval;
|
|
|
|
/* FIXME: way to validate prescaler & divider */
|
|
|
|
/* Enable the PWM peripheral */
|
|
soc_pmc_peripheral_enable(id);
|
|
|
|
retval = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
|
|
if (retval < 0) {
|
|
return retval;
|
|
}
|
|
|
|
/* Configure the clock A that will be used by all 4 channels */
|
|
pwm->PWM_CLK = PWM_CLK_PREA(prescaler) | PWM_CLK_DIVA(divider);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_driver_api sam_pwm_driver_api = {
|
|
.set_cycles = sam_pwm_set_cycles,
|
|
.get_cycles_per_sec = sam_pwm_get_cycles_per_sec,
|
|
};
|
|
|
|
#define SAM_INST_INIT(inst) \
|
|
PINCTRL_DT_INST_DEFINE(inst); \
|
|
static const struct sam_pwm_config sam_pwm_config_##inst = { \
|
|
.regs = (Pwm *)DT_INST_REG_ADDR(inst), \
|
|
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst), \
|
|
.id = DT_INST_PROP(inst, peripheral_id), \
|
|
.prescaler = DT_INST_PROP(inst, prescaler), \
|
|
.divider = DT_INST_PROP(inst, divider), \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(inst, \
|
|
&sam_pwm_init, NULL, \
|
|
NULL, &sam_pwm_config_##inst, \
|
|
POST_KERNEL, \
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
|
|
&sam_pwm_driver_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(SAM_INST_INIT)
|