OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/spi/spi_dw.h

276 lines
7.7 KiB
C
Raw Blame History

/* spi_dw.h - Designware SPI driver private definitions */
/*
* Copyright (c) 2015 Intel Corporation.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __SPI_DW_H__
#define __SPI_DW_H__
#include <spi.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef void (*spi_dw_config_t)(void);
/* Private structures */
struct spi_dw_config {
uint32_t regs;
#ifdef CONFIG_SPI_DW_CLOCK_GATE
void *clock_data;
#endif /* CONFIG_SPI_DW_CLOCK_GATE */
#ifdef CONFIG_SPI_DW_CS_GPIO
char *cs_gpio_name;
uint32_t cs_gpio_pin;
#endif /* CONFIG_SPI_DW_CS_GPIO */
spi_dw_config_t config_func;
};
struct spi_dw_data {
device_sync_call_t sync;
uint32_t error:1;
uint32_t dfs:3; /* dfs in bytes: 1,2 or 4 */
uint32_t slave:17; /* up 16 slaves */
uint32_t fifo_diff:9; /* cannot be bigger than FIFO depth */
uint32_t last_tx:1;
uint32_t _unused:1;
#ifdef CONFIG_SPI_DW_CLOCK_GATE
struct device *clock;
#endif /* CONFIG_SPI_DW_CLOCK_GATE */
#ifdef CONFIG_SPI_DW_CS_GPIO
struct device *cs_gpio_port;
#endif /* CONFIG_SPI_DW_CS_GPIO */
const uint8_t *tx_buf;
uint32_t tx_buf_len;
uint8_t *rx_buf;
uint32_t rx_buf_len;
};
/* Helper macros */
#ifdef CONFIG_SPI_DW_ARC_AUX_REGS
#define _REG_READ(__sz) sys_in##__sz
#define _REG_WRITE(__sz) sys_out##__sz
#define _REG_SET_BIT sys_io_set_bit
#define _REG_CLEAR_BIT sys_io_clear_bit
#define _REG_TEST_BIT sys_io_test_bit
#else
#define _REG_READ(__sz) sys_read##__sz
#define _REG_WRITE(__sz) sys_write##__sz
#define _REG_SET_BIT sys_set_bit
#define _REG_CLEAR_BIT sys_clear_bit
#define _REG_TEST_BIT sys_test_bit
#endif /* CONFIG_SPI_DW_ARC_AUX_REGS */
#define DEFINE_MM_REG_READ(__reg, __off, __sz) \
static inline uint32_t read_##__reg(uint32_t addr) \
{ \
return _REG_READ(__sz)(addr + __off); \
}
#define DEFINE_MM_REG_WRITE(__reg, __off, __sz) \
static inline void write_##__reg(uint32_t data, uint32_t addr) \
{ \
_REG_WRITE(__sz)(data, addr + __off); \
}
#define DEFINE_SET_BIT_OP(__reg_bit, __reg_off, __bit) \
static inline void set_bit_##__reg_bit(uint32_t addr) \
{ \
_REG_SET_BIT(addr + __reg_off, __bit); \
}
#define DEFINE_CLEAR_BIT_OP(__reg_bit, __reg_off, __bit) \
static inline void clear_bit_##__reg_bit(uint32_t addr) \
{ \
_REG_CLEAR_BIT(addr + __reg_off, __bit); \
}
#define DEFINE_TEST_BIT_OP(__reg_bit, __reg_off, __bit) \
static inline int test_bit_##__reg_bit(uint32_t addr) \
{ \
return _REG_TEST_BIT(addr + __reg_off, __bit); \
}
/* Common registers settings, bits etc... */
/* CTRLR0 settings */
#define DW_SPI_CTRLR0_SCPH_BIT (6)
#define DW_SPI_CTRLR0_SCPOL_BIT (7)
#define DW_SPI_CTRLR0_SRL_BIT (11)
#define DW_SPI_CTRLR0_SCPH BIT(DW_SPI_CTRLR0_SCPH_BIT)
#define DW_SPI_CTRLR0_SCPOL BIT(DW_SPI_CTRLR0_SCPOL_BIT)
#define DW_SPI_CTRLR0_SRL BIT(DW_SPI_CTRLR0_SRL_BIT)
#define DW_SPI_CTRLR0_DFS_16(__bpw) ((__bpw) - 1)
#define DW_SPI_CTRLR0_DFS_32(__bpw) (((__bpw) - 1) << 16)
#ifdef CONFIG_ARC
#define DW_SPI_CTRLR0_DFS DW_SPI_CTRLR0_DFS_16
#else
#define DW_SPI_CTRLR0_DFS DW_SPI_CTRLR0_DFS_32
#endif
/* 0x38 represents the bits 8,16 and 32. Knowing that 24 is bits 8 and 16
* These are the bits were when you divide by 8, you keep the result as it is.
* For all the other ones, 4 to 7, 9 to 15, etc... you need a +1,
* since on such division it takes only the result above 0
*/
#define SPI_DFS_TO_BYTES(__bpw) (((__bpw) & ~0x38) ? \
(((__bpw) / 8) + 1) : \
((__bpw) / 8))
/* SSIENR bits */
#define DW_SPI_SSIENR_SSIEN_BIT (0)
/* SR bits and values */
#define DW_SPI_SR_BUSY_BIT (0)
#define DW_SPI_SR_TFNF_BIT (1)
#define DW_SPI_SR_RFNE_BIT (3)
/* IMR bits (ISR valid as well) */
#define DW_SPI_IMR_TXEIM_BIT (0)
#define DW_SPI_IMR_TXOIM_BIT (1)
#define DW_SPI_IMR_RXUIM_BIT (2)
#define DW_SPI_IMR_RXOIM_BIT (3)
#define DW_SPI_IMR_RXFIM_BIT (4)
#define DW_SPI_IMR_MSTIM_BIT (5)
/* IMR values */
#define DW_SPI_IMR_TXEIM BIT(DW_SPI_IMR_TXEIM_BIT)
#define DW_SPI_IMR_TXOIM BIT(DW_SPI_IMR_TXOIM_BIT)
#define DW_SPI_IMR_RXUIM BIT(DW_SPI_IMR_RXUIM_BIT)
#define DW_SPI_IMR_RXOIM BIT(DW_SPI_IMR_RXOIM_BIT)
#define DW_SPI_IMR_RXFIM BIT(DW_SPI_IMR_RXFIM_BIT)
#define DW_SPI_IMR_MSTIM BIT(DW_SPI_IMR_MSTIM_BIT)
/* ISR values (same as IMR) */
#define DW_SPI_ISR_TXEIS DW_SPI_IMR_TXEIM
#define DW_SPI_ISR_TXOIS DW_SPI_IMR_TXOIM
#define DW_SPI_ISR_RXUIS DW_SPI_IMR_RXUIM
#define DW_SPI_ISR_RXOIS DW_SPI_IMR_RXOIM
#define DW_SPI_ISR_RXFIS DW_SPI_IMR_RXFIM
#define DW_SPI_ISR_MSTIS DW_SPI_IMR_MSTIM
/* Error interrupt */
#define DW_SPI_ISR_ERRORS_MASK (DW_SPI_ISR_TXOIS | \
DW_SPI_ISR_RXUIS | \
DW_SPI_ISR_RXOIS | \
DW_SPI_ISR_MSTIS)
/* ICR Bit */
#define DW_SPI_SR_ICR_BIT (0)
/* Threshold defaults */
#define DW_SPI_FIFO_DEPTH CONFIG_SPI_DW_FIFO_DEPTH
#define DW_SPI_TXFTLR_DFLT ((DW_SPI_FIFO_DEPTH*1)/2) /* 50% */
#define DW_SPI_RXFTLR_DFLT ((DW_SPI_FIFO_DEPTH*5)/8)
/* Interrupt mask (IMR) */
#define DW_SPI_IMR_MASK (0x0)
#define DW_SPI_IMR_UNMASK (DW_SPI_IMR_TXEIM | \
DW_SPI_IMR_TXOIM | \
DW_SPI_IMR_RXUIM | \
DW_SPI_IMR_RXOIM | \
DW_SPI_IMR_RXFIM)
#define DW_SPI_IMR_MASK_TX (~(DW_SPI_IMR_TXEIM | \
DW_SPI_IMR_TXOIM))
#define DW_SPI_IMR_MASK_RX (~(DW_SPI_IMR_RXUIM | \
DW_SPI_IMR_RXOIM | \
DW_SPI_IMR_RXFIM))
/*
* Including the right register definition file
* SoC SPECIFIC!
*/
#ifdef CONFIG_SOC_QUARK_SE_SS
#include "spi_dw_quark_se_ss_regs.h"
#else
#include "spi_dw_regs.h"
#endif
/* GPIO used to emulate CS */
#ifdef CONFIG_SPI_DW_CS_GPIO
#include <gpio.h>
static inline void _spi_config_cs(struct device *dev)
{
struct spi_dw_config *info = dev->config->config_info;
struct spi_dw_data *spi = dev->driver_data;
struct device *gpio;
gpio = device_get_binding(info->cs_gpio_name);
if (!gpio) {
spi->cs_gpio_port = NULL;
return;
}
gpio_pin_configure(gpio, info->cs_gpio_pin, GPIO_DIR_OUT);
/* Default CS line to high (idling) */
gpio_pin_write(gpio, info->cs_gpio_pin, 1);
spi->cs_gpio_port = gpio;
}
static inline void _spi_control_cs(struct device *dev, int on)
{
struct spi_dw_config *info = dev->config->config_info;
struct spi_dw_data *spi = dev->driver_data;
if (spi->cs_gpio_port) {
gpio_pin_write(spi->cs_gpio_port, info->cs_gpio_pin, !on);
}
}
#else
#define _spi_control_cs(...)
#define _spi_config_cs(...)
#endif /* CONFIG_SPI_DW_CS_GPIO */
/* Interrupt mask
* SoC SPECIFIC!
*/
#if defined(CONFIG_SOC_QUARK_SE) || defined(CONFIG_SOC_QUARK_SE_SS)
#ifdef CONFIG_ARC
#define _INT_UNMASK INT_ENABLE_ARC
#else
#define _INT_UNMASK INT_UNMASK_IA
#endif
#define _spi_int_unmask(__mask) \
sys_write32(sys_read32(__mask) & _INT_UNMASK, __mask)
#else
#define _spi_int_unmask(...)
#endif /* CONFIG_SOC_QUARK_SE || CONFIG_SOC_QUARK_SE_SS */
/* Based on those macros above, here are common helpers for some registers */
DEFINE_MM_REG_WRITE(baudr, DW_SPI_REG_BAUDR, 16)
DEFINE_MM_REG_READ(txflr, DW_SPI_REG_TXFLR, 32)
DEFINE_MM_REG_READ(rxflr, DW_SPI_REG_RXFLR, 32)
DEFINE_MM_REG_WRITE(imr, DW_SPI_REG_IMR, 8)
DEFINE_MM_REG_READ(isr, DW_SPI_REG_ISR, 8)
DEFINE_SET_BIT_OP(ssienr, DW_SPI_REG_SSIENR, DW_SPI_SSIENR_SSIEN_BIT)
DEFINE_CLEAR_BIT_OP(ssienr, DW_SPI_REG_SSIENR, DW_SPI_SSIENR_SSIEN_BIT)
DEFINE_TEST_BIT_OP(ssienr, DW_SPI_REG_SSIENR, DW_SPI_SSIENR_SSIEN_BIT)
DEFINE_TEST_BIT_OP(sr_busy, DW_SPI_REG_SR, DW_SPI_SR_BUSY_BIT)
#ifdef __cplusplus
}
#endif
#endif /* __SPI_DW_H__ */
Reference in New Issue View Git Blame Copy Permalink