zephyr/ext/hal/qmsi/drivers/include/qm_mailbox.h

192 lines
5.6 KiB
C

/*
* Copyright (c) 2017, Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INTEL CORPORATION OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __QM_MAILBOX_H__
#define __QM_MAILBOX_H__
#include "qm_common.h"
#include "qm_soc_regs.h"
#include "qm_mailbox_defs.h"
#if (HAS_MAILBOX)
/**
* Mailbox driver.
*
* @defgroup groupMailbox Mailbox
* @{
*/
/**
* Mailbox channel status return codes
*/
typedef enum {
/** No interrupt pending nor any data to consume. */
QM_MBOX_CH_IDLE = 0,
/**
* Receiver has serviced the interrupt and data
* has not been consumed. */
QM_MBOX_CH_DATA_PEND = QM_MBOX_CH_STS,
/**
* Receiver hasn't serviced the interrupt and data
* has not been consumed.
*/
QM_MBOX_CH_INT_AND_DATA_PEND =
(QM_MBOX_CH_STS | QM_MBOX_CH_STS_CTRL_INT),
} qm_mbox_ch_status_t;
/**
* Mailbox message payload index values.
*/
typedef enum {
QM_MBOX_PAYLOAD_0 = 0, /**< Payload index value 0. */
QM_MBOX_PAYLOAD_1, /**< Payload index value 1. */
QM_MBOX_PAYLOAD_2, /**< Payload index value 2. */
QM_MBOX_PAYLOAD_3, /**< Payload index value 3. */
QM_MBOX_PAYLOAD_NUM, /**< Number of payloads. */
} qm_mbox_payload_t;
/**
* Definition of the mailbox mode of operation, interrupt mode or polling mode.
*/
typedef enum {
/** Mailbox channel operates in interrupt mode. */
QM_MBOX_INTERRUPT_MODE = 0,
/** Mailbox channel operates in polling mode. */
QM_MBOX_POLLING_MODE
} qm_mbox_mode_t;
/**
* Definition of the mailbox message.
*/
typedef struct {
/** Control word - bits 30 to 0 used as data/message id,
* bit 31 triggers channel interrupt when set by the driver.
*/
uint32_t ctrl;
/** Mailbox data buffer. */
uint32_t data[QM_MBOX_PAYLOAD_NUM];
} qm_mbox_msg_t;
/**
* Definition of the mailbox callback function prototype.
*
* @param[in] data The callback user data.
*/
typedef void (*qm_mbox_callback_t)(void *data);
/**
* Mailbox Configuration Structure
*/
typedef struct {
/**< Mailbox Destination */
qm_mbox_destination_t dest;
/**< Mode of operation */
qm_mbox_mode_t mode;
/**<
* Message callback.
*
* Called after a message is received on the channel and the channel
* is configured in interrupt mode.
*
* @note NULL for a write Mailbox.
*
* @param[in] data User defined data.
*/
qm_mbox_callback_t callback;
/**< Callback function data to return via the callback function. */
void *callback_data;
} qm_mbox_config_t;
/**
* Set the mailbox channel configuration.
*
* The function registers the interrupt vector to the mailbox ISR handler
* when at least one mailbox channel is enabled, configured in interrupt mode
* and the ISR is not handled by the application.
*
* @param[in] mbox_ch Mailbox channel identifier.
* @param[in] config Mailbox configuration.
*
* @return Standard errno return type for QMSI.
* @retval 0 on success.
* @retval Negative @ref errno for possible error codes.
*/
int qm_mbox_ch_set_config(const qm_mbox_ch_t mbox_ch,
const qm_mbox_config_t *const config);
/**
* Write to a specified mailbox channel.
*
* @param[in] mbox_ch Mailbox channel identifier.
* @param[in] msg Pointer to the data to write to the mailbox channel. This
* must not be NULL.
*
* @return Standard errno return type for QMSI.
* @retval 0 on success.
* @retval Negative @ref errno for possible error codes.
*/
int qm_mbox_ch_write(const qm_mbox_ch_t mbox_ch,
const qm_mbox_msg_t *const msg);
/**
* Read specified mailbox channel.
*
* @param[in] mbox_ch Mailbox channel identifier.
* @param[out] msg Pointer to the data to read from the mailbox channel. This
* must not be NULL.
*
* @return Standard errno return type for QMSI.
* @retval 0 on success.
* @retval Negative @ref errno for possible error codes.
*/
int qm_mbox_ch_read(const qm_mbox_ch_t mbox_ch, qm_mbox_msg_t *const msg);
/**
* Retrieve the specified mailbox channel status.
*
* @param[in] mbox_ch Mailbox identifier to retrieve the status from.
* @param[out] status Mailbox status. This must not be NULL.
*
* @return Standard errno return type for QMSI.
* @retval 0 on success.
* @retval Negative @ref errno for possible error codes.
*/
int qm_mbox_ch_get_status(const qm_mbox_ch_t mbox_ch,
qm_mbox_ch_status_t *const status);
/**
* @}
*/
#endif /* HAS_MAILBOX */
#endif /* __QM_MAILBOX_H__ */