181 lines
6.6 KiB
ReStructuredText
181 lines
6.6 KiB
ReStructuredText
.. _float_v2:
|
|
|
|
Floating Point Services
|
|
#######################
|
|
|
|
The kernel allows threads to use floating point registers on board
|
|
configurations that support these registers.
|
|
|
|
.. note::
|
|
Floating point services are currently available only for boards
|
|
based on the ARM Cortex-M4 or the Intel x86 architectures. The
|
|
services provided are architecture specific.
|
|
|
|
The kernel does not support the use of floating point registers by ISRs.
|
|
|
|
.. contents::
|
|
:local:
|
|
:depth: 2
|
|
|
|
Concepts
|
|
********
|
|
|
|
The kernel can be configured to provide only the floating point services
|
|
required by an application. Three modes of operation are supported,
|
|
which are described below. In addition, the kernel's support for the SSE
|
|
registers can be included or omitted, as desired.
|
|
|
|
No FP registers mode
|
|
====================
|
|
|
|
This mode is used when the application has no threads that use floating point
|
|
registers. It is the kernel's default floating point services mode.
|
|
|
|
If a thread uses any floating point register,
|
|
the kernel generates a fatal error condition and aborts the thread.
|
|
|
|
Unshared FP registers mode
|
|
==========================
|
|
|
|
This mode is used when the application has only a single thread
|
|
that uses floating point registers.
|
|
|
|
The kernel initializes the floating point registers so they can be used
|
|
by any thread. The floating point registers are left unchanged
|
|
whenever a context switch occurs.
|
|
|
|
.. note::
|
|
Incorrect operation may result if two or more threads use
|
|
floating point registers, as the kernel does not attempt to detect
|
|
(or prevent) multiple threads from using these registers.
|
|
|
|
Shared FP registers mode
|
|
========================
|
|
|
|
This mode is used when the application has two or more threads that use
|
|
floating point registers. Depending upon the underlying CPU architecture,
|
|
the kernel supports one or more of the following thread sub-classes:
|
|
|
|
* non-user: A thread that cannot use any floating point registers
|
|
|
|
* FPU user: A thread that can use the standard floating point registers
|
|
|
|
* SSE user: A thread that can use both the standard floating point registers
|
|
and SSE registers
|
|
|
|
The kernel initializes the floating point registers so they can be used
|
|
by any thread, then saves and restores these registers during
|
|
context switches to ensure the computations performed by each FPU user
|
|
or SSE user are not impacted by the computations performed by the other users.
|
|
|
|
On the ARM Cortex-M4 architecture the kernel treats *all* threads
|
|
as FPU users when shared FP registers mode is enabled. This means that the
|
|
floating point registers are saved and restored during a context switch, even
|
|
when the associated threads are not using them. Each thread must provide
|
|
an extra 132 bytes of stack space where these register values can be saved.
|
|
|
|
On the x86 architecture the kernel treats each thread as a non-user,
|
|
FPU user or SSE user on a case-by-case basis. A "lazy save" algorithm is used
|
|
during context switching which updates the floating point registers only when
|
|
it is absolutely necessary. For example, the registers are *not* saved when
|
|
switching from an FPU user to a non-user thread, and then back to the original
|
|
FPU user. The following table indicates the amount of additional stack space a
|
|
thread must provide so the registers can be saved properly.
|
|
|
|
=========== =============== ==========================
|
|
Thread type FP register use Extra stack space required
|
|
=========== =============== ==========================
|
|
cooperative any 0 bytes
|
|
preemptive none 0 bytes
|
|
preemptive FPU 108 bytes
|
|
preemptive SSE 464 bytes
|
|
=========== =============== ==========================
|
|
|
|
The x86 kernel automatically detects that a given thread is using
|
|
the floating point registers the first time the thread accesses them.
|
|
The thread is tagged as an SSE user if the kernel has been configured
|
|
to support the SSE registers, or as an FPU user if the SSE registers are
|
|
not supported. If this would result in a thread that is an FPU user being
|
|
tagged as an SSE user, or if the application wants to avoid the exception
|
|
handling overhead involved in auto-tagging threads, it is possible to
|
|
pretag a thread using one of the techniques listed below.
|
|
|
|
* A statically-created x86 thread can be pretagged by passing the
|
|
:c:macro:`K_FP_REGS` or :c:macro:`K_SSE_REGS` option to
|
|
:c:macro:`K_THREAD_DEFINE`.
|
|
|
|
* A dynamically-created x86 thread can be pretagged by passing the
|
|
:c:macro:`K_FP_REGS` or :c:macro:`K_SSE_REGS` option to
|
|
:cpp:func:`k_thread_create()`.
|
|
|
|
* An already-created x86 thread can pretag itself once it has started
|
|
by passing the :c:macro:`K_FP_REGS` or :c:macro:`K_SSE_REGS` option to
|
|
:cpp:func:`k_float_enable()`.
|
|
|
|
If an x86 thread uses the floating point registers infrequently it can call
|
|
:cpp:func:`k_float_disable()` to remove its tagging as an FPU user or SSE user.
|
|
This eliminates the need for the kernel to take steps to preserve
|
|
the contents of the floating point registers during context switches
|
|
when there is no need to do so.
|
|
When the thread again needs to use the floating point registers it can re-tag
|
|
itself as an FPU user or SSE user by calling :cpp:func:`k_float_enable()`.
|
|
|
|
Implementation
|
|
**************
|
|
|
|
Performing Floating Point Arithmetic
|
|
====================================
|
|
|
|
No special coding is required for a thread to use floating point arithmetic
|
|
if the kernel is properly configured.
|
|
|
|
The following code shows how a routine can use floating point arithmetic
|
|
to avoid overflow issues when computing the average of a series of integer
|
|
values.
|
|
|
|
.. code-block:: c
|
|
|
|
int average(int *values, int num_values)
|
|
{
|
|
double sum;
|
|
int i;
|
|
|
|
sum = 0.0;
|
|
|
|
for (i = 0; i < num_values; i++) {
|
|
sum += *values;
|
|
values++;
|
|
}
|
|
|
|
return (int)((sum / num_values) + 0.5);
|
|
}
|
|
|
|
Suggested Uses
|
|
**************
|
|
|
|
Use the kernel floating point services when an application needs to
|
|
perform floating point operations.
|
|
|
|
Configuration Options
|
|
*********************
|
|
|
|
To configure unshared FP registers mode, enable the :option:`CONFIG_FLOAT`
|
|
configuration option and leave the :option:`CONFIG_FP_SHARING` configuration
|
|
option disabled.
|
|
|
|
To configure shared FP registers mode, enable both the :option:`CONFIG_FLOAT`
|
|
configuration option and the :option:`CONFIG_FP_SHARING` configuration option.
|
|
Also, ensure that any thread that uses the floating point registers has
|
|
sufficient added stack space for saving floating point register values
|
|
during context switches, as described above.
|
|
|
|
Use the :option:`CONFIG_SSE` configuration option to enable support for
|
|
SSEx instructions (x86 only).
|
|
|
|
API Reference
|
|
*************
|
|
|
|
.. doxygengroup:: float_apis
|
|
:project: Zephyr
|
|
|