zephyr/dts/bindings/pwm
Dat Nguyen Duy 0b0988db2d drivers: pwm_nxp_s32_emios: add support for pwm capture
This introduces pwm capture shim driver for NXP S32 EMIOS,
the driver uses SAIC mode that is supported for all channels,
to capture the counter value on each edge for period/pulse
measurement

Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
2023-09-29 15:40:04 +02:00
..
atmel,sam-pwm.yaml
atmel,sam0-tcc-pwm.yaml
espressif,esp32-ledc.yaml
espressif,esp32-mcpwm.yaml
fsl,imx27-pwm.yaml
gd,gd32-pwm.yaml
infineon,xmc4xxx-ccu4-pwm.yaml
infineon,xmc4xxx-ccu8-pwm.yaml
intel,blinky-pwm.yaml
ite,it8xxx2-pwm.yaml
ite,it8xxx2-pwmprs.yaml
litex,pwm.yaml
maxim,max31790.yaml
microchip,xec-pwm.yaml
microchip,xec-pwmbbled.yaml
nordic,nrf-pwm.yaml
nordic,nrf-sw-pwm.yaml
nuvoton,npcx-pwm.yaml
nuvoton,numaker-pwm.yaml
nxp,ctimer-pwm.yaml
nxp,flexpwm.yaml
nxp,imx-pwm.yaml
nxp,kinetis-ftm-pwm.yaml dts: bindings: nxp,kinetis-*: do not re-specify pinctrl-0 type 2023-09-28 14:46:16 +02:00
nxp,kinetis-pwt.yaml
nxp,kinetis-tpm.yaml dts: bindings: nxp,kinetis-*: do not re-specify pinctrl-0 type 2023-09-28 14:46:16 +02:00
nxp,pca9685.yaml
nxp,s32-emios-pwm.yaml drivers: pwm_nxp_s32_emios: add support for pwm capture 2023-09-29 15:40:04 +02:00
nxp,sctimer-pwm.yaml
openisa,rv32m1-tpm.yaml
pwm-controller.yaml
raspberrypi,pico-pwm.yaml
renesas,pwm-rcar.yaml
sifive,pwm0.yaml
silabs,gecko-pwm.yaml
st,stm32-pwm.yaml drivers: pwm: stm32: support capturing on four channels 2023-09-07 09:42:25 +02:00
telink,b91-pwm.yaml dts: bindings: add missing pinctrl-device.yaml includes 2023-09-27 13:58:28 +02:00
ti,cc13xx-cc26xx-timer-pwm.yaml
xlnx,xps-timer-1.00.a-pwm.yaml