253 lines
6.4 KiB
C
253 lines
6.4 KiB
C
/*
|
|
* Copyright (c) 2018 Diego Sueiro
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <errno.h>
|
|
#include <drivers/i2c.h>
|
|
#include <sys/util.h>
|
|
#include <em_cmu.h>
|
|
#include <em_i2c.h>
|
|
#include <em_gpio.h>
|
|
#include <soc.h>
|
|
|
|
#define LOG_LEVEL CONFIG_I2C_LOG_LEVEL
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(i2c_gecko);
|
|
|
|
#include "i2c-priv.h"
|
|
|
|
#define DEV_CFG(dev) \
|
|
((struct i2c_gecko_config * const)(dev)->config->config_info)
|
|
#define DEV_DATA(dev) \
|
|
((struct i2c_gecko_data * const)(dev)->driver_data)
|
|
#define DEV_BASE(dev) \
|
|
((I2C_TypeDef *)(DEV_CFG(dev))->base)
|
|
|
|
struct i2c_gecko_config {
|
|
I2C_TypeDef *base;
|
|
CMU_Clock_TypeDef clock;
|
|
I2C_Init_TypeDef i2cInit;
|
|
u32_t bitrate;
|
|
struct soc_gpio_pin pin_sda;
|
|
struct soc_gpio_pin pin_scl;
|
|
#ifdef CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
|
|
u8_t loc_sda;
|
|
u8_t loc_scl;
|
|
#else
|
|
u8_t loc;
|
|
#endif
|
|
};
|
|
|
|
struct i2c_gecko_data {
|
|
struct k_sem device_sync_sem;
|
|
u32_t dev_config;
|
|
};
|
|
|
|
void i2c_gecko_config_pins(struct device *dev,
|
|
const struct soc_gpio_pin *pin_sda,
|
|
const struct soc_gpio_pin *pin_scl)
|
|
{
|
|
I2C_TypeDef *base = DEV_BASE(dev);
|
|
struct i2c_gecko_config *config = DEV_CFG(dev);
|
|
|
|
soc_gpio_configure(pin_scl);
|
|
soc_gpio_configure(pin_sda);
|
|
|
|
#ifdef CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
|
|
base->ROUTEPEN = I2C_ROUTEPEN_SDAPEN | I2C_ROUTEPEN_SCLPEN;
|
|
base->ROUTELOC0 = (config->loc_sda << _I2C_ROUTELOC0_SDALOC_SHIFT) |
|
|
(config->loc_scl << _I2C_ROUTELOC0_SCLLOC_SHIFT);
|
|
#else
|
|
base->ROUTE = I2C_ROUTE_SDAPEN | I2C_ROUTE_SCLPEN | (config->loc << 8);
|
|
#endif
|
|
}
|
|
|
|
static int i2c_gecko_configure(struct device *dev, u32_t dev_config_raw)
|
|
{
|
|
I2C_TypeDef *base = DEV_BASE(dev);
|
|
struct i2c_gecko_config *config = DEV_CFG(dev);
|
|
struct i2c_gecko_data *data = DEV_DATA(dev);
|
|
u32_t baudrate;
|
|
|
|
if (!(I2C_MODE_MASTER & dev_config_raw)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (I2C_SPEED_GET(dev_config_raw)) {
|
|
case I2C_SPEED_STANDARD:
|
|
baudrate = KHZ(100);
|
|
break;
|
|
case I2C_SPEED_FAST:
|
|
baudrate = MHZ(1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
data->dev_config = dev_config_raw;
|
|
config->i2cInit.freq = baudrate;
|
|
|
|
I2C_Init(base, &config->i2cInit);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_gecko_transfer(struct device *dev, struct i2c_msg *msgs,
|
|
u8_t num_msgs, u16_t addr)
|
|
{
|
|
I2C_TypeDef *base = DEV_BASE(dev);
|
|
struct i2c_gecko_data *data = DEV_DATA(dev);
|
|
I2C_TransferSeq_TypeDef seq;
|
|
I2C_TransferReturn_TypeDef ret = -EIO;
|
|
u32_t timeout = 300000U;
|
|
|
|
if (!num_msgs) {
|
|
return 0;
|
|
}
|
|
|
|
seq.addr = addr << 1;
|
|
|
|
do {
|
|
seq.buf[0].data = msgs->buf;
|
|
seq.buf[0].len = msgs->len;
|
|
|
|
if ((msgs->flags & I2C_MSG_RW_MASK) == I2C_MSG_READ) {
|
|
seq.flags = I2C_FLAG_READ;
|
|
} else {
|
|
seq.flags = I2C_FLAG_WRITE;
|
|
if (num_msgs > 1) {
|
|
/* Next message */
|
|
msgs++;
|
|
num_msgs--;
|
|
if ((msgs->flags & I2C_MSG_RW_MASK)
|
|
== I2C_MSG_READ) {
|
|
seq.flags = I2C_FLAG_WRITE_READ;
|
|
} else {
|
|
seq.flags = I2C_FLAG_WRITE_WRITE;
|
|
}
|
|
seq.buf[1].data = msgs->buf;
|
|
seq.buf[1].len = msgs->len;
|
|
}
|
|
}
|
|
|
|
if (data->dev_config & I2C_ADDR_10_BITS) {
|
|
seq.flags |= I2C_FLAG_10BIT_ADDR;
|
|
}
|
|
|
|
/* Do a polled transfer */
|
|
ret = I2C_TransferInit(base, &seq);
|
|
while (ret == i2cTransferInProgress && timeout--) {
|
|
ret = I2C_Transfer(base);
|
|
}
|
|
|
|
if (ret != i2cTransferDone) {
|
|
goto finish;
|
|
}
|
|
|
|
/* Next message */
|
|
msgs++;
|
|
num_msgs--;
|
|
} while (num_msgs);
|
|
|
|
finish:
|
|
if (ret != i2cTransferDone) {
|
|
ret = -EIO;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_gecko_init(struct device *dev)
|
|
{
|
|
struct i2c_gecko_config *config = DEV_CFG(dev);
|
|
u32_t bitrate_cfg;
|
|
int error;
|
|
|
|
CMU_ClockEnable(config->clock, true);
|
|
|
|
i2c_gecko_config_pins(dev, &config->pin_sda, &config->pin_scl);
|
|
|
|
bitrate_cfg = i2c_map_dt_bitrate(config->bitrate);
|
|
|
|
error = i2c_gecko_configure(dev, I2C_MODE_MASTER | bitrate_cfg);
|
|
if (error) {
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_driver_api i2c_gecko_driver_api = {
|
|
.configure = i2c_gecko_configure,
|
|
.transfer = i2c_gecko_transfer,
|
|
};
|
|
|
|
#ifdef DT_SILABS_GECKO_I2C_0
|
|
|
|
#define PIN_I2C_0_SDA {DT_INST_0_SILABS_GECKO_I2C_LOCATION_SDA_1, \
|
|
DT_INST_0_SILABS_GECKO_I2C_LOCATION_SDA_2, gpioModeWiredAnd, 1}
|
|
#define PIN_I2C_0_SCL {DT_INST_0_SILABS_GECKO_I2C_LOCATION_SCL_1, \
|
|
DT_INST_0_SILABS_GECKO_I2C_LOCATION_SCL_2, gpioModeWiredAnd, 1}
|
|
|
|
static struct i2c_gecko_config i2c_gecko_config_0 = {
|
|
.base = (I2C_TypeDef *)DT_INST_0_SILABS_GECKO_I2C_BASE_ADDRESS,
|
|
.clock = cmuClock_I2C0,
|
|
.i2cInit = I2C_INIT_DEFAULT,
|
|
.pin_sda = PIN_I2C_0_SDA,
|
|
.pin_scl = PIN_I2C_0_SCL,
|
|
#ifdef CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
|
|
.loc_sda = DT_INST_0_SILABS_GECKO_I2C_LOCATION_SDA_0,
|
|
.loc_scl = DT_INST_0_SILABS_GECKO_I2C_LOCATION_SCL_0,
|
|
#else
|
|
#if DT_INST_0_SILABS_GECKO_I2C_LOCATION_SDA_0 \
|
|
!= DT_INST_0_SILABS_GECKO_I2C_LOCATION_SCL_0
|
|
#error I2C_0 DTS location-* properties must have identical value
|
|
#endif
|
|
.loc = DT_INST_0_SILABS_GECKO_I2C_LOCATION_SCL_0,
|
|
#endif
|
|
.bitrate = DT_INST_0_SILABS_GECKO_I2C_CLOCK_FREQUENCY,
|
|
};
|
|
|
|
static struct i2c_gecko_data i2c_gecko_data_0;
|
|
|
|
DEVICE_AND_API_INIT(i2c_gecko_0, DT_INST_0_SILABS_GECKO_I2C_LABEL,
|
|
&i2c_gecko_init, &i2c_gecko_data_0, &i2c_gecko_config_0,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&i2c_gecko_driver_api);
|
|
#endif /* DT_SILABS_GECKO_I2C_0 */
|
|
|
|
#ifdef DT_SILABS_GECKO_I2C_1
|
|
|
|
#define PIN_I2C_1_SDA {DT_INST_1_SILABS_GECKO_I2C_LOCATION_SDA_1, \
|
|
DT_INST_1_SILABS_GECKO_I2C_LOCATION_SDA_2, gpioModeWiredAnd, 1}
|
|
#define PIN_I2C_1_SCL {DT_INST_1_SILABS_GECKO_I2C_LOCATION_SCL_1, \
|
|
DT_INST_1_SILABS_GECKO_I2C_LOCATION_SCL_2, gpioModeWiredAnd, 1}
|
|
|
|
static struct i2c_gecko_config i2c_gecko_config_1 = {
|
|
.base = (I2C_TypeDef *)DT_INST_1_SILABS_GECKO_I2C_BASE_ADDRESS,
|
|
.clock = cmuClock_I2C1,
|
|
.i2cInit = I2C_INIT_DEFAULT,
|
|
.pin_sda = PIN_I2C_1_SDA,
|
|
.pin_scl = PIN_I2C_1_SCL,
|
|
#ifdef CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
|
|
.loc_sda = DT_INST_1_SILABS_GECKO_I2C_LOCATION_SDA_0,
|
|
.loc_scl = DT_INST_1_SILABS_GECKO_I2C_LOCATION_SCL_0,
|
|
#else
|
|
#if DT_INST_1_SILABS_GECKO_I2C_LOCATION_SDA_0 \
|
|
!= DT_INST_1_SILABS_GECKO_I2C_LOCATION_SCL_0
|
|
#error I2C_1 DTS location-* properties must have identical value
|
|
#endif
|
|
.loc = DT_INST_1_SILABS_GECKO_I2C_LOCATION_SCL_0,
|
|
#endif
|
|
.bitrate = DT_INST_1_SILABS_GECKO_I2C_CLOCK_FREQUENCY,
|
|
};
|
|
|
|
static struct i2c_gecko_data i2c_gecko_data_1;
|
|
|
|
DEVICE_AND_API_INIT(i2c_gecko_1, DT_INST_1_SILABS_GECKO_I2C_LABEL,
|
|
&i2c_gecko_init, &i2c_gecko_data_1, &i2c_gecko_config_1,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&i2c_gecko_driver_api);
|
|
#endif /* DT_SILABS_GECKO_I2C_1 */
|