bd3908b2a9
This commit changes the net_buf getter functions in nbuf.h by adding a timeout parameter. These function prototypes are changed to accept a timeout parameter. net_nbuf_get_rx() net_nbuf_get_tx() net_nbuf_get_data() net_nbuf_get_reserve_rx() net_nbuf_get_reserve_tx() net_nbuf_get_reserve_data() net_nbuf_copy() net_nbuf_copy_all() net_nbuf_push() net_nbuf_append() net_nbuf_write() net_nbuf_insert() Following convinience functions have not been changed net_nbuf_append_u8 net_nbuf_append_be16 net_nbuf_append_be32 net_nbuf_insert_u8 net_nbuf_insert_be16 net_nbuf_insert_be32 net_nbuf_write_u8 net_nbuf_write_be16 net_nbuf_write_be32 so they call the base function using K_FOREVER. Use the base function if you want to have a timeout when net_buf is allocated. Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> |
||
|---|---|---|
| .. | ||
| src | ||
| Makefile | ||
| README | ||
| prj.conf | ||
| testcase.ini | ||
README
Application implementing 802.15.4 "serial-radio" protocol.
How to use:
1. Build and flash Zephyr application to Quark board with 802.15.4 radio,
at the moment CC2520 radio is supported.
2. Connect board to Linux PC, /dev/ttyACM[number] should appear
3. Run Contiki-based native border router (6lbr, native-router, etc)
Example for Contiki:
$ cd examples/ipv6/native-border-router
$ make
$ sudo ./border-router.native -v5 -s ttyACM0 fd01::1/64
Now you have Contiki native border router, simple web server should show some
802.15.4 devices. Web server address is printed in the border-router output
screen:
...
Server IPv6 addresses:
0x62c5c0: =>fd01::212:4b00:531f:113a
...
Go to http://[fd01::212:4b00:531f:113a]/
It shall show you Neighbors and Routes.
PS: Make sure your disto ModemManager is disabled, otherwise it sends AT commands
to our device ;)
$ sudo systemctl disable ModemManager.service